SamsungメーカーDVD-R120の使用説明書/サービス説明書
ページ先へ移動 of 72
Instruction Manual DVD-R120 www .samsung.com 0_AK68-00683A-03_Cover 2/17/05 10:04 AM Page 1.
FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ar e designed to provide r easonable protection against harmful interfer ence in a residential installation.
English - 3 Important Safety Instructions Read these operating instructions carefully befor e using the unit. Follow all the safety instructions listed below . Keep these operating instructions handy for future refer ence. 1) Read these instructions. 2) Keep these instructions.
● MOTION JPEG is not supported. ● Use a 700MB(80 minutes) CD-R/R W disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. ● If the CD-R/R W disc was not recor ded as a closed session, you may experience a delay in the early playback time, and all recor ded files may not play .
English - 5 ● DVD-R W (V ideo mode) - This is a format that is used for recor ding data on a DVD-R W or DVD-R disc. The disc can be played by an existing DVD player once it has been finalized.
6 - English Getting Started Getting Started W ar ning .......................................................................2 Precaution ....................................................................3 Important Safety Instructions .............
English - 7 Editing Editing Basic Editing (Title List) ............................................ 67 Renaming(Labeling) a T itle ....................................... 67 Locking(Protecting) a T itle .......................................68 Deleting a T itle .
8 - English General Features High quality progressive scan Progr essive scanning provides high r esolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Cir cuitry provides the highest video playback and recor ding quality . (See page 17.
English - 9 1) Be sur e to be familiar with Safety Instructions before using this product. (See pages 2~3) 2) If a pr oblem occurs, check for T roubleshooting.
10 - English Step 3 Recording There ar e two differ ent recor ding methods, Direct Recording and T imer Recording. T imer recor ding is classified as a Date : Once(mm/dd), Every Day , MON-SA T , Every SA T , etc.
English - 11 Front Panel Display 1. Lights when a disc is loaded. 2. Lights in the recor d mode. 3. Lights to indicate the timer recor d mode. 4. Lights when a -R/R W/RAM disc is loaded. 5. Displays the messages. 6. Lights in the progr essive scan mode.
12 - English 1. DIGIT AL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack. 2. DIGIT AL AUDIO OUT(COAXIAL) Connects to an amplifier having a digital coaxial audio input jack. 3. LINE AUDIO OUT Connects to the audio input of external equipment using audio cables.
English - 13 10. MENU Button Brings up the DVD recor der’ s setup menu. 11. ENTER/DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 12. REC MODE Button This will display the recor ding status. 13. REC Button Use to make a recor ding on DVD-RAM/-R W/-R discs.
14 - English A Quick Overview presented in this guide will give you enough information to start using the r ecorder . C onnecting & S etting Up Quick Overview Quick Overview .....................................................14 Step 1 : Unpacking .
English - 15 Step 1: Unpacking Method 1 : Antenna + DVD Recorder + TV : No Cable box Y ou can recor d non-scrambled channels by selecting the channel on the DVD Recorder .
16 - English ● Progr essive Scan Output (480p) “Consumers should note that not all high definition television sets are fully compatible with this pr oduct and may cause artifacts to be displayed in the pictur e.
English - 17 4. The message “Please set your TV to Progr essive input, T o deactivate, press [STOP] key .” will appear . Press the ENTER button. 5. The message “V ideo Output Mode Progr essive Scan” will appear . ● Y ou will enjoy high quality accurate color repr oduction images.
Method 2 : Connecting to a stereo amplifier with analog input jacks If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks. 18 - English There ar e several ways to connect your DVD Recorder . Select the audio connection that best suits you below .
English - 19 Method 3: Connecting to an A V amplifier with a digital input jack If your A V amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. T o enjoy Dolby Digital or DTS sound, you will need to set up the audio settings.
After all connections are complete, plug the power cor d in the wall outlet. “Auto” appears in the panel display . This means that the current time is being set automatically (Auto Program) thr ough the antenna under connection and also the channel is being set.
English - 21 Install Batteries in the Remote Control ● Open the battery cover on the back of the remote. ● Insert two AAA batteries. Make sur e that the polarities (+ and -) are aligned corr ectly .
Before Play , T urn on your TV and switch the input selector on your TV so that the signal from the DVD Recor der appears on your TV screen. If you connected an external Audio System, turn on your Audio System and select AUX, CD or DVD.
English - 23 2. Clock Set This menu is used to set the current time. Y ou need to set the time to use timer recor ding. 1 W ith the unit in Stop mode/No Disc mode, press the MENU button. 2 Select Setup using the …† buttons, then press the ENTER or √ button.
24 - English 7 Select the sub menu(Clock Data CH, T ime Zone or Daylight Saving) using the …† buttons, then press the ENTER or √ button. Clock Data CH Select a channel that carries a time signal using the …† buttons then press the ENTER or √ button.
3. Channel Set Y ou can set the Antenna/Cable TV settings automatically . 1 W ith the unit in Stop mode/No Disc mode, press the MENU button. 2 Select Setup using the …† buttons, then press the ENTER or √ button. 3 Select System using the …† buttons, then press the ENTER or √ button.
26 - English 6 Select Antenna using the …† buttons, then press the ENTER or √ button. 6 Select Antenna or Cable TV(depending on the hookup you chose) using the …† buttons, then press the ENTER or √ button. 7 Select Auto Channel Memory using the …† buttons, then press the ENTER or √ button.
English - 27 5 Select Channel Add/Delete using the …† buttons, then press the ENTER or √ button. 6 Use the …† or number buttons to select the channels you want to add or delete on the [Select channel] screen. Then, press the ENTER button. ● Using …† buttons for channel selection allows the user to add/delete one channel at a time.
28 - English Dynamic Compression This is only active when a Dolby Digital signal is detected. ● On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appr opriate compression to make low-level content mor e intelligible and prevent dramatic passages fr om getting too loud.
English - 29 5 Use the …† buttons to select the desired item(4:3 Letter Box, 4:3 Pan-Scan or 16:9 W ide). Then press the ENTER or √ button. If you have a 4:3 standard TV ● 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.
30 - English R ecording This unit can recor d on various types of discs. Before recor ding, read the following instructions and select the disc type according to your pr eference. Recordable discs This recor der can recor d on the following discs. DVD-RAM DVD-R W DVD-R ● DVD-R Ws and DVD-RAMs are r ewritable.
English - 31 R ecording Unrecordable video V ideo with copy protection cannot be r ecorded on this DVD Recorder . When the DVD Recorder receives a copy guard signal while r ecording, r ecording stops and the following message appears on the screen.
R ecording 32 - English Recording the current TV program you are watching Check that the disc has enough available space for the recor ding. Adjust the recor ding picture quality mode (see page 31). 1 Press the OPEN/CLOSE button and place a recordable disc on the disc tray .
R ecording English - 33 To stop recording Press the STOP ( ) button to stop or finish a r ecording in progr ess. ● When using DVD-RAM/DVD-R W/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed. 3 Press the CH ( / ) or number ( ~ ) buttons to select the current pr ogram you want to record.
34 - English R ecording 5 Press the REC button. To stop recording Press the STOP ( ) button to stop or finish a r ecording in progr ess. ● When using DVD-RAM/DVD-R W/DVD-R discs, the message ‘Updating the information of disc.
English - 35 Copying from a Camcorder Check that the disc has enough available space for the recor ding. Adjust the recor ding mode. 1 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray . 2 Press the OPEN/CLOSE button to close the disc tray .
36 - English R ecording Making a One T ouch Recording (OTR) Y ou can set the DVD-Recorder to r ecord in 30-minute increments by pr essing the REC button. 1 If you want to record a TV channel, use the CH( / ) buttons or number buttons to select a desired channel.
English - 37 R ecording ● Source: The video input sour ce (L1, L2 or DV), or the broadcasting channel you want to make a timer recor ding of. When selecting channels to be recor ded, the …† buttons on the remote contr ol can let you select only the channels that have been memorized during Auto Scan.
38 - English R ecording 3 Press the …† buttons to select Scheduled Record List, and then press the ENTER or √ button. 4 Press the …† buttons to select the number of the Scheduled Record List you want to edit, and then press the ENTER or √ button.
English - 39 R ecording 4 Press the …† buttons to select the number of the timer recording you want to delete, and then press the ENTER or √ button. The Edit and Delete items are displayed. 5 Press the …† buttons to select Delete, and then press the ENTER or √ button.
40 - English R ecording Recording the Scheduled Record List 1 When the start time set in the Scheduled Record List arrives, if the set is powered off, the set will be automatically powered on and starts recording. If the set is already power ed on, a message asking to confirm to proceed or cancel the timer recording appears.
English - 59 S ettings & Adjustments Clock Set (See page 23) Channel Set (See page 25) CM Skip T ime Setting When a program r ecorded on a DVD-RAM, a DVD-R W , or a DVD-R is played, the unit can be set to automatically skip a portion of the pr ogram corresponding to a CM(commer cial) Skip T ime set by the user .
60 - English S ettings & Adjustments EP Mode T ime Setting Y ou can set the EP (Extended Play) mode’ s time setting to 6 or 8 hours. 1 W ith a disc inserted and the unit in Stop mode, press the MENU button on the remote contr ol. 2 Select Setup using the …† buttons, then press the ENTER or √ button.
English - 61 S ettings & Adjustments 2 Select Setup using the …† buttons, then press the ENTER or √ button. 3 Select Language using the …† buttons, then press the ENTER or √ button. Language setup menu will be displayed. 4 Use the …† buttons to select the desired sub menu and press the ENTER or √ button.
62 - English S ettings & Adjustments 4 Select the sub menu(TV Aspect,…,3D Noise Reduction) using the …† buttons, then press the ENTER or √ button. TV Aspect: see page 29 Input Level Adjusts the level of the input signal. ● Darker : If you feel the screen is too light and you want to make the screen darker .
English - 63 S ettings & Adjustments Front Display Adjust the brightness of the unit’ s front panel display . ● Bright : Makes the Front Panel Display bright. ● Dim : Makes the Front Panel Display dim. ● Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
64 - English S ettings & Adjustments 1 Select Rating Level using the …† buttons. 2 Press the ENTER or √ button. The rating level will be displayed. 3 Select Rating Level you want using the …† buttons, then press the ENTER or √ button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play .
English - 65 S ettings & Adjustments 1 Select Change Password using the …† buttons. 2 Press the ENTER or √ button. The 'Enter the password.' message will be displayed. 3 Enter the 4-digit password using the 0 to 9 buttons on the remote contr ol.
E diting 66 - English ● Title List A title is a section of recor ded video and audio. T itle List shows a list to help you select a title. Since the title list consists of the information on stream that is actually r ecorded, if one title is deleted, that title cannot be played again.
English - 67 Renaming(Labeling) a T itle Follow these instructions to rename a title list entry , i.e., to edit the title of a recor ded program. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
68 - English E diting Locking(Protecting) a T itle Follow these instructions to lock an entry to protect it from accidental deletion. Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
English - 69 Deleting a Section of a T itle Follow these instructions to delete a section of a T itle List entry . Using the TITLE LIST button Using the TITLE LIST button 1 Press the TITLE LIST button. The T itle List screen is displayed Using the MENU button ● Press the MENU button.
70 - English E diting 4 Press the ENTER button at the starting point. The image and starting point time ar e displayed in the section deletion starting point window .
English - 71 5 Press the ENTER button at the end point. ● The image and end point time are displayed in the End window . ● The yellow-colored selection bar moves to the Make item. - To make a new playlist - 6 Press the …† buttons to select Make, and then press the ENTER button.
72 - English 3 Press the …† buttons to select Play , and then select the ENTER button. The playlist entries will be played. ● T o view the current status of the disc and pr ogress of playback : Press the INFO button, and the information about the disc will appear .
English - 73 4 Enter the desired characters using the …† œ √ buttons. ● This function is the same as the Rename function in renaming the title list. (See page 67.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button.
74 - English E diting Editing a Scene for the Playlist Follow these instructions to edit scenes for a playlist. 1 Press the PLA Y LIST button. The Edit Playlist screen is displayed. Using the MENU button ● Press the MENU button in the stop mode. ● Press the …† buttons to select Playlist, and then pr ess the ENTER or √ button.
English - 75 7 Press the ENTER button at the end point of the scene. ● The image and ending point time are displayed in the End window . 8 Press the …† buttons to select Change, and then press the ENTER button. ● The scene you want to modify is changed with the selected section.
76 - English E diting 4 Press the …† œ √ buttons to select the scene you want to move (change the position), and then press the ENTER button. 5 Press the …† buttons to select Move, then press the ENTER button. ● A yellow selection window is displayed on the scene to be moved.
English - 77 7 Press the ENTER button at the end point of the scene. ● The image and time of the end point are displayed in the End window . 8 Press the …† buttons to select Add, and then press the ENTER button. ● The section you want to add is inserted prior to the scene selected in step 4.
78 - English E diting 3 Press the …† buttons to select Delete, and then press the ENTER button. ● Y ou will be prompted with the delete confirmation message 'Do you want to delete?'. 4 Press the œ √ buttons to select Y es, and then press the ENTER button.
English - 79 4 Enter the desired characters using the …† œ √ buttons. ● This function is the same as the Rename function in renaming the title list. (See page 67.) ● The maximum number of characters that can be entered is 31. All 31 characters can be displayed by pressing the INFO button.
80 - English E diting Disc Protection Disc Protect allows you to pr otect your discs from being formatted or deleted due to unintended operations. 1 W ith the unit in Stop mode, press the MENU button on the remote contr ol. 2 Press the …† buttons to select Disc Manager , and then press the ENTER or √ button.
English - 81 2 Press the …† buttons to select Disc Manager , and then press the ENTER or √ button. 3 Press the …† button to select Delete All T itle Lists, and then press the ENTER or √ button. ● Y ou will be prompted with the confirmation message 'Do you want to delete all title lists?'.
82 - English Finalizing a disc After you recor d titles onto a DVD-R W/DVD-R disc with your DVD recor der , it needs to be finalized before it can be played back on external devices. 1 W ith the unit in Stop mode, press the MENU button on the remote contr ol.
English - 83 4 Press the œ √ buttons to select Y es, and then press the ENTER button. The disc is unfinalized. ■ A DVD-R W can be finalized or unfinalized in V ideo mode.
84 - English A dditional Information Recording is possible for DVD- RAM/DVD-R W/DVD-R discs only . If a program is copy pr otected, it cannot be recor ded. Checkpoint 1 I pressed the REC button but ther e is no response. If your product malfunctions, go thr ough the check- points below before contacting a Samsung authorized service center .
English - 85 A dditional Information Playback Check whether the disc is inserted cor- rectly with the label facing up. Check the regional code of the DVD disc. This DVD recor der cannot play some types of discs. (See page 5.) Checkpoint 1 Checkpoint 2 Checkpoint 3 Cannot play the disc.
86 - English A dditional Information Sound Video Checkpoint 1 Checkpoint 2 Checkpoint 3 Checkpoint 4 No sound. Are you watching a pr ogram in slow or skip mode? If you are playing a pr ogram at a speed other than normal speed, sound will not be heard.
English - 87 A dditional Information Remote Control Unit Read the table of contents and then find and read the section describing your problem, and follow the instructions given. T urn your DVD recorder off and on. If the problem still persists, contact a nearby Samsung service center .
88 - English A dditional Information Specifications Power requir ements Power consumption W eight Dimensions Operating temp. Other conditions V ideo (1,2) Audio(1,2) DV Input Receivable Channels Audio V ideo Picture Compr ession format Audio Compression format Recording Quality Audio Frequency Response 120V AC, 60Hz 35 W atts 8.
English - 89 A dditional Information W arranty This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM- SUNG) and delivered new , in the original carton to th.
HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J.07660-051 1 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www .
デバイスSamsung DVD-R120の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung DVD-R120をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung DVD-R120の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung DVD-R120の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung DVD-R120で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung DVD-R120を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung DVD-R120の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung DVD-R120に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung DVD-R120デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
