SamsungメーカーDVD-R2000の使用説明書/サービス説明書
ページ先へ移動 of 65
.
2 Safety Instructions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE P ARTS ARE INSIDE. REFER SER VICING TO QUALIFIED SERVICE PER- SONNEL. CAUTION: DVD PLA YERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZ- ARDOUS RADIA TION EXPOSURE IF DIRECTED.
Safety Instructions 3 W ARNING T o reduce the risk of fire or shock hazard, do not expose this DVD-R2000 to rain or moisture. CAUTION THIS PRODUCT UTILIZES A LASER. ANY USE OF CONTROLS OR ADJUSTMENTS OR PERFOR- MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA Y RESUL T IN HAZ- ARDOUS RADIA TION EXPOSURE.
T able Of Contents 4 Setup ..............................................................................................6 Before Y ou Start ............................................................................................6 General Features .
T able Of Contents 5 Setting Up the Audio Options........................................................................38 Setting Up the Display Options......................................................................39 Language Selection .....
Setup 6 Before Y ou Start 1 Slide the back cover all the way out to open the batter y compar tment of the remote. 2 Install two AAA size batteries. Make sure to match the “+” and “—” ends of the batteries with the diagram inside the compartment.
Setup 7 General Features Recording • Records high quality images on a DVD- RAM Disc • DVD-RAM Cartridge Cartridge keeps disc safe from scratches and finger- prints • MPEG-2 V ariable Bit Rate Combination of real time VBR and Visibility Modula- tion T echnology that creates higher picture quality .
8 Setup Disc T ype and Characteristics This DVD-R2000 is capable of playing the following types of discs having the corresponding logos: • DO NOT play CD-ROM, CD-I, and DVD-R (DVD-ROM) discs in this player! (CDGs play audio only , not graphics.) DVD VIDEO-CD AUDIO-CD DVD-RAM Disc T ypes (Logos) Recording T ypes Disc Size Max.
W e recommend you use the T ype2 DVD-RAM Disc car tridge with this product. • DVD-RAM discs come with or without the cartridge. This product is compatible with either one, but the DVD-RAM disc with cartridge is recommended. • If the disc has fingerprints or dust on it, the recording, playback or editing may not perfor m properly .
10 Description-Front Panel Front Panel Controls Setup Œ REC LED ´ ST ANDBY / ON LED When the DVD-R2000 is first plugged in, the indicator lights. When POWER is pressed on again, the light goes out and the player is turned on. ˇ POWER T urns the DVD-R2000 on and off.
11 Front Panel Display Setup Œ Disc type indicators ´ Repeat play mode( ALL or A-B ) ˇ Dolby Digital Disc ¨ Linear PCM audio output ˆ DTS( Digital Theater System ) output Ø MPEG-2 audio output ∏ MP-3 audio output ” Reverse playback / Pause / For ward play- back / Record ’ Angle Indicator ˝ Play List T o playback play list.
12 Setup Description-Rear Panel Rear Panel ΠANTENNA TERMINALS T wo independent cables or antennas can be connected to these terminals. Input: Use IN terminal to receive a signal from VHF/UHF antennas or your cable system. Output: Use the OUT terminal to send the signal being received by the IN termi- nal out to another component.
13 Setup ” COMPONENT AUDIO OUT JACKS Use these jacks to connect the audio out- put signals when using the component video output jacks. ’ INTERLACE SCAN OUTPUT JACKS (525I) Use these jacks to connect to a TV with Component video input jacks for a higher quality picture.
14 Remote Control Setup Œ DVD POWER Button ´ NUMBER Buttons ˇ 3D Button/+100 Button Use to simulate a 3D Surround effect from 2 stereo speakers. Press to select cable channel over 100 on TV . ¨ REPEA T Button Allows you to repeat play a title, chapter , track, or disc.
15 Setup Æ BOOKMARK Button Use to memorize scenes for replay . ı SET UP Button Use to Bring up the DVD-R2000’ s Setup menu. ˜ NUMBER Button 2 Also used as page up button. ¯ NUMBER Button 8 Also used as page down button. ˘ OPEN/CLOSE Button Open and close the disc tray .
16 Remote Control Setup — TV CONTROLS • VOLUME (+, - ) Buttons • CHANNEL (Channel up/down) Button • TV/VIDEO Selection Button TV POWER Button T urns the TV on and off. Use to turn off or set the remote control to control a compatible TV (See page 57).
17 Connections Connecting the Video Cable (DVD-R2000 + TV) Method 1 : 525P( Progressive Scan) Component Video If your TV has Component(Progressive Scan) video, use a video-grade cable for Y , P B and P R connections. Note that it is essential to match the color coded connection with a compatible.
18 Connecting the Audio Cables (DVD-R2000 + TV+Amplifier) Connections Method 1 : 1. Use the TV Audio Input jacks Connect the audio cables to the Audio Output L(left-white) and R (right-red) jacks on the back of your DVD-R2000, and to the corresponding Audio Input (1 or 2 )jacks on your TV .
19 T o Watch TV and Playback a VCR (or Other Equipment) Connections If you want to watch TV 1. Plug the incoming antenna(AIR) or cable antenna(CA TV) into the VHF/UHF INPUT ter minal on the DVD-R2000. 2. Connect a coaxial cable between the VHF/UHF OUTPUT terminal on the DVD-R2000 and the ANT INPUT terminal on the TV .
20 Playing a Disc Before Playback • T urn on a TV and press the TV/VIDEO button to select video mode. • T urn on your audio system and select AUX, CD or DVD-R2000. • After plugging in the player , the first time, press the DVD-R2000 POWER button.
21 DVD Playback Features Stopping Playback • Press the STOP button during playback. - Pressing STOP button once more displays the external input mode (T uner mode or Line input mode). Pausing Playback • Press the PLA Y/PAUSE or STEP button during playback.
22 Using the Display Function (Except MP3) Selecting a Title Number , Chapter Number or T rack Number 1 During playback, press the DISPLA Y button on the remote. The display banner appears. 2 Use the UP/DOWN button to select a title or a chapter number .
23 Using the Search & Skip Functions During playback, you can search quickly through a chapter or track or use the skip function to jump to the next selection. Searching through a Chapter or T rack (Except MP3) • T urn the JOG/SHUTTLE dial during the PLA Y mode.
24 Selecting the Audio & Subtitle Language Using the AUDIO Button Y ou can select a desired language quickly and easily with the AUDIO button on the remote. 1 Press the AUDIO button on the remote. 2 Use the UP/DOWN button to select the desired language on a DVD.
25 Basic Functions Selecting the Desired Screen Angle & Using the Zoom Using the ANGLE button (DVD only) When a DVD contains multiple angles of a particular scene, you can select the Angle function. Check to see if an ‘ ANGLE ( ) ’ mark is present at the upper right hand corner of the screen.
26 Basic Functions Repeat Play & Using the A-B Repeat Function Repeat Play Repeat play allows you to repeat a track, title or the entire disc. 1 Press the REPEA T button on the remote. - Repeat screen appears. 2 Select T itle or Chapter using the LEFT/RIGHT button (when playing a DVD/DVD-RAM).
27 Basic Functions Using the Bookmark Function The Bookmark function lets you select parts of a DVD, VCD (MENU(PBC) OFF mode) or CD so that you can quickly find the section at a later time. Using the Bookmark Function (Except DVD-RAM, MP3) While the programmed track is being played, the bookmark function doesn ’ t operate.
28 Basic Functions Using the Disc View Function The desired video display can be accessed directly without using the menu function. T rack View (VCD)/Index View (VCD) This function works in VCD1.1 & 2.0 mode (MENU (PBC) OFF mode). In stop mode on VCD, press the ANGLE button and the TRACK VIEW will be displayed directly .
29 Basic Functions 3D Sound Function The simulated surround effect (SP A TIALIZER N-2-2) depends on the disc contents. If you connect the DVD-R2000 to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD-R2000 with a two channel stereo through the analog outputs.
30 T o Watch TV & VCR Playback (or Other Equipment) W atching TV First check that the T uner Mode is matched with the ANT input. (TV :AIR or CA TV :CABLE) (See page 34) Then, turn on the power of the DVD-R2000 and your TV. 1 Select a TV channel you desire to watch with the NUMBER but- tons on the remote control.
31 If Y ou W ant to Record a TV Program or Line Input Signal Y ou can use a DVD-RAM disc to record any program or a component connected to a line input. First have a recordable RAM disc prepared. Release the write protect of the RAM disc. (The record protector is located at the left bottom of RAM disc cartridge.
Changing Setup Menu 32 Using the Setup Menu The Setup menu lets you set up the time, TV channel settings, recording type selection, various audio functions, display settings, language settings and parental control. 1 In stop mode, press the SET UP button on the remote.
33 Changing Setup Menu Setting the Current Date and Current Time in General Options Mode This setting is required to perfor m timer recording. 1 In stop mode, press the SET UP button on the remote. - Setup menu will be displayed. 2 Use the UP/DOWN button to select the “General Options”.
34 T o select T uner Mode in General Options Mode Set the tuner mode to TV or CA TV , depending on the signal coming in to your home. 1 Use the UP/DOWN button to select the T uner Mode in General Options. Press the ENTER button. 2 Use the UP/DOWN button to select TV or CA TV .
Adding and Deleting Channels (Add-Delete Channel) T o add or delete a par ticular channel from memor y: 1 Use the UP/DOWN button to select Channel Setting in General Options. Press the ENTER button. 2 Use the UP/DOWN button to select Add-Delete Channel.
36 Formatting the DVD-RAM Disc 1 Use the UP/DOWN button to select Format Disc in General Options. Press the ENTER button. 2 Use the LEFT/RIGHT button to select Y es. 3 Press the ENTER button. Notes • During formatting, do NOT power off or open your disc tray .
37 Setting Up the Recording Options 1 In stop mode, press the SET UP button on the remote. 2 Use the UP/DOWN button to select Recording Options. Press the ENTER button.
38 Changing Setup Menu Setting Up the Audio Options 1 In stop mode, press the SET UP button on the remote. - Setup menu will be displayed. 2 Use the UP/DOWN button to select Audio Options. Press the ENTER button. 3 Use the UP/DOWN button to select the desired item.
39 Changing Setup Menu Setting Up the Display Options 1 In stop mode, press the SET UP button on the remote. - Setup menu will be displayed. 2 Use the UP/DOWN button to select Display Options. Press the ENTER button. 3 Use the UP/DOWN button to select the desired item.
40 Language Selection If you set the audio language, subtitle and disc menu language in advance, they will come up automatically ever y time you watch a movie. 1 In stop mode, press the SET UP button on the remote. 2 Use the UP/DOWN button to select Language Selection.
41 Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating. This helps you control the types of DVDs that your family watches. There are up to 8 rating lev- els on a disc. 1 In stop mode, press the SET UP button on the remote.
Advanced Functions 42 OTR (One Time Record) Y ou can set the record time in 30 minute increments up to 4 hours 30minutes. 1 Set the recording time. Each time you press the Record button, the time will change in the following sequence: REC → 0:30 → 1:00 → ,… → 4:00 → 4:30 → 0:00 The time can be set up to 4:30.
43 Timer Recording Before timer recording • The current date and time must be set on the Setup menu. (See page 33) • The timer recording scheduling can be done only when the DVD-R2000 has a RAM disc or a disc is not inserted. T o Set the T imer Recording 1 Insert a DVD-RAM disc.
44 Advanced Functions 9 Press the RIGHT button. Use the UP/DOWN button to select the timer recording mode. 10 Press the ENTER button. T imer recording setting is completed. 11 T o make the timer REC scheduling menu disappear , press the TIMER button again or press the RETURN/INPUT button.
45 Advanced Functions T o change the timer recording program you set 1 Press the TIMER button on the remote. - Display the Timer REC Scheduling. 2 Use the UP/DOWN button to select the Program No. that you want to change. Press the ENTER button. 3 Move to a desired field using the LEFT/RIGHT button.
46 Advanced Functions T o Use Edit Function This function lets you edit the recorded title name and info, and set protection mode. 1 Press EDIT button on the remote. - Title List window is displayed. 1) Title Info : Displays information of the currently selected title.
47 Advanced Functions T o Delete Entire Title 1 Press EDIT button on the remote. - Title List window is displayed. 2 Select a desired title using the LEFT/RIGHT/UP/DOWN button to delete, and then press the ENTER button. 3 Select “Y es” using the UP/DOWN button to edit, and then press the ENTER button.
48 Advanced Functions 5 Use the UP/DOWN button to select “Entire title” in Delete menu, and then press the ENTER button. 6 Select “Y es” using the UP/DOWN button to delete, and then press the ENTER button. - “Delete completed” message is displayed.
49 Advanced Functions T o Delete Part of a Title 1 Press EDIT button on the remote. - Title List window is displayed. 2 Select a desired title using the LEFT/RIGHT/UP/DOWN button to delete, and then press the ENTER button. 3 Select “Y es” using the UP/DOWN button to edit, and then press the ENTER button.
50 Advanced Functions 6 T o Set a Section to Delete Press the PLA Y button. - Title is play backed. 7 Use the UP/DOWN button to select Start icon, press the ENTER button to delete at a desired time. - The selected screen is displayed on the Range Setting window .
51 Advanced Functions T o Edit the Title Name 1 Press EDIT button on the remote. - Title List window is displayed. 2 Select a desired title using the LEFT/RIGHT/UP/DOWN button in order to edit the title name, and then press the ENTER button. - Title Select window is displayed.
52 T o Protect the Recorded Title from being deleted 1 Press EDIT button on the remote. - Title List window is displayed. 2 Select a desired title using the LEFT/RIGHT/UP/DOWN button that you want protect dialing, and then press the ENTER button. - Title Select window is displayed.
53 Advanced Functions Using the CD/MP3 Disc View Function The desired music can be accessed directly without using the menu function. 1 Press the TOP MENU button. - The “Navigator-Program” window is displayed. 2 Use the LEFT/RIGHT button to select the DIRECTORY window .
54 Advanced Functions T o Program in Specific Sequence Y ou can program your favorite songs or tracks in the Director y in a preferred sequence. 1 Press the TOP MENU button on the remote. - The “Navigator-Program” window is displayed. 2 Use the LEFT/RIGHT button to select the DIRECTORY window .
55 Advanced Functions T o Playback the Programmed Songs in the Program Window 1 Press the TOP MENU button on the remote. - The “Navigator-Program” window is displayed. 2 Use the LEFT/RIGHT button to select the PROGRAM window . 3 Use the UP/DOWN button to select the desired track.
56 Advanced Functions T o Delete a Programmed Song in the Program Window First change the program order to the normal order . 1 Press the TOP MENU button. - The “Navigator-Program” window is displayed. 2 Use the LEFT/RIGHT button to select the PROGRAM window .
57 Advanced Functions Using the PROGRAM button Program playback lets you setup a specific order to playback tracks. Y ou can program the tracks in the sequence you prefer . (See page 55.) Normal Order : Play tracks as they appear on the disc 1 During playback, press the PROGRAM button.
58 1 T urn on the TV 2 Point the DVD’ s remote control at the TV . 3 While holding the TV POWER button down, enter the code for your brand. e.g) For Samsung TV While holding down the TV POWER button, enter 0 and 1. 4 If the TV turns off, setup is complete.
59 T roubleshooting Guide Before requesting ser vice. Reference Problem No operations can be perfor med with remote control. Disc does not play . The icon appears on screen. Disc Menu doesn’t appear . Playback mode differs from the Setup Menu selection.
60 Specifications Reference Model Name Power Power Consumption Recording Format Recording Disc Recording Mode Recording T ime Image Signal Mode Playback Media Net Size (W x H x Dmm) (W x H x Dinches) .
61 W arranty (for USA users only) This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new , in the original carton to the original cons.
62 Reference REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREA TER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
63 W arranty (for Canada users only) Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.
64 Memo.
SAMSUNG ELECTRONICS AMERICA INC. 105 CHALLENGER ROAD, RIDGEFIELD P ARK, NJ 07660 U.S.A. FOR YOUR NEAREST SAMSUNG SERVICE CENTER DIAL 1-800-SAMSUNG AH68-00636Z.
デバイスSamsung DVD-R2000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung DVD-R2000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung DVD-R2000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung DVD-R2000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung DVD-R2000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung DVD-R2000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung DVD-R2000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung DVD-R2000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung DVD-R2000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
