AudiovoxメーカーXMB10の使用説明書/サービス説明書
ページ先へ移動 of 16
128-7546 1 of 16 -1- Released 9-15-05. Xpr e s s ® Sat ellit e R adio R e ce iv e r XMB10 B o om B o x Us e r G uide.
128-7546 2 of 16 -2- CONTENTS Congratulatio ns ........................................................................................ 3 FCC Regulations ...................................................................................... 4 Cautions and W arnings .
128-7546 3 of 16 -3- Congratulations Thank you for purchasing the Audiovox Xpress XM ® Satellite Radio Boom Box. Y ou are one step closer to experienc- ing the latest innovation in XM ® Satellite Radio. XM ® Satellite Radio will revolutionize your in-home or On-the-Go entertainment.
128-7546 4 of 16 -4- FCC Regulations This unit complies with the interference limits relative to a Class B digital device, applicable under Part 15 of the FCC Rules regarding installation in a residential environment.
128-7546 5 of 16 -5- Setting Up and Installing Y our Kit NOTE: The XM ® signal can be received and pro- cessed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc. In placing the antenna, therefore, these factors must be taken into account .
128-7546 6 of 16 -6- is also located on the front panel. When the Xpress ® Receiver is installed in the boom box, the 1. PHONES Jack: Accepts a stereo headphone jack to provide private listening capability for the Boom Box. 2. AUX Jack: Accepts an audio input signal from an external audio device.
128-7546 7 of 16 -7- 1. Turn the Boom Box upside down to access the battery compartment. 2. Push the battery cover latches forward and flip up the battery compartment cover to the open position. 3. Insert eight (8) C-Cell batteries observing battery polarity as shown; then close the cover .
128-7546 8 of 16 -8- b. After making sure the connectors and guide pin hole are properly lined up, gently lower the Xpress into the mounting plate, and press down on the Xpress to mate the connectors together . The raised detent on the mounting plate will enter the notch on the rear of the Receiver , indicating the Xpress is properly seated.
128-7546 9 of 16 -9- 5. Installing the Antenna For best reception, the supplied antenna should be placed near a window if in the house or , if outdoors, in an open area and as high as possible; some repositioning may be required to achieve optimum results.
128-7546 10 of 16 -10- T o mount the antenna: a. Plug the antenna into the ANT connector on the back of the XMB10. b. Leave the antenna in place on the Boom Box, or remove the antenna from its mount, uncoil the antenna cable, and place it at the preferred location inside or outside the home.
128-7546 11 of 16 -11- cable; use protective grommets wherever rough openings are encountered. d. If the antenna is mounted outside, route the cable from the antenna position to the interior of the home, working the cable through the basement, under a window sill, etc.
128-7546 12 of 16 -12- Specifications Nominal Output Power per Channel 5.0 Watts Rms T otal Harmonic Distortion (THD) 0.3% at 1 Watt Frequency Response 30Hz to 20kHz Signal-to-Noise Ratio > 65dB Maximum Speaker Impedance 8 Ohms Nominal Headphone Output Impedance 32 Ohms Headphone Output Level 800 mV (Maximum) Headphone Connector Type 3.
128-7546 13 of 16 -13- Maintenance Periodic Inspection The XMB10 Boom Box should be inspected periodically for external damage. At least once every 30 days of use, perform the following checks: 1. Inspect the Receiver connector for loose, bent or broken pins, misalignment, etc.
128-7546 14 of 16 -14- Troubleshooting System does not turn on XMB10 does not operate using batteries Intermittent operation ANTENNA error message NO SIGNAL message No sound from XMB10 speakers Receiv.
128-7546 15 of 16 -15- AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be pr.
128-7546 16 of 16 -16- 128-7546 © 2005 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788.
デバイスAudiovox XMB10の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Audiovox XMB10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAudiovox XMB10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Audiovox XMB10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Audiovox XMB10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Audiovox XMB10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAudiovox XMB10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Audiovox XMB10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAudiovox XMB10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。