SamsungメーカーLCD 24Bの使用説明書/サービス説明書
ページ先へ移動 of 27
• LCD 24B • LCD 12B • STD 24B • B ASIC 12B •7 B KEYSET USER GUIDE System Software Release 1, 2, 3, 4 No v ember 1999 SAMSUNG DCS DIGIT AL COMMUNICA TIONS SYSTEM.
T ABLE OF CONTENTS ABOUT THIS BOOK ........................................................... 1 THINGS Y OU SHOULD KNO W ................................ 2–9 OUTSIDE CALLS Making an Outside Call .....................................................
CUST OMIZING Y OUR KEYSET AME BGM ........................................................................................ 33 AME P ass word ................................................................................ 3 3 Select Ring T one .......
THINGS Y OU SHOULD KNO W USER ORIENT A TION SAMSUNG DCS telephones are called “k e ysets. ” They contain b uttons or “ke ys” that are used to access or activate the many features of your office phone system. The k eys with paper designation strips are programmab le k eys .
4 5 LCD 24B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation strip . Replace the strip and cov er .
6 LCD 12B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation strip . Replace the strip and cov er .
8 B ASIC 12B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation strip . Replace the strip and cov er .
OUTSIDE CALLS MAKING AN OUTSIDE CALL • Lift the handset and press an idle outside line button, line group button or dial a line access code to receive dial tone —OR— to use the speakerphone, pre.
INTERCOM CALLS CALLING O THER ST A TIONS • Dial the e xtension number or g roup number . • W ait f or the par ty to ans wer . If you hear a brief tone burst instead of ringback tone, the station y ou called is set f or V oice Announce or A uto Ans wer .
CALL PR OCESSING SYSTEM HOLD • When you are connected to an y call, press HOLD . The call will flash green at your keyset. If this call appears on a line key at other keysets, it will flash red at those keysets. • T o tak e the caller off hold, press that ke y and the green flashing light will go steady green again.
16 When you are tr ansf erring a call to a ke yset set f or V oice Announce or A uto Ans wer , the transf erred call will alwa ys ring. NO TES: 1. After the inside par ty answ ers, y ou ma y alter nate bac k and for th betw een the par ties by pressing the TRSF key .
2. The station that receives a Forwarded All call can transfer the call to the f orwarded station. This is useful when you are e xpecting an important call but you do not wish to be disturbed by other calls.
• Dial the destination number (e.g., 202 ) OR Press UP or DO WN to select the destination Press the right soft key to move the cursor • Dial 1 to set OR Press UP or DO WN to select YES or NO • P.
22 • The B ke y inser ts a flash. • The C ke y inser ts a pause. • The D key is used for pulse to tone conversion. If your system uses rotary (or pulse) dialing C .O . lines, pressing D while entering a speed dial number causes all subsequent digits to be sent as DTMF tones.
features require optional software and/or hardware. Please see your service and installation company for details. T o use Dial b y V oice: • Change your station passcode (see Changing Y our P asscode ). • Y ou must be assigned to a channel of the VDIAL card.
MEET ME P A GE • Lift the handset. • Press the Meet Me P age ( MMPG ) k e y or dial 54 . • Dial the desired zone n umber . • After the attention tone, instruct the paged person to dial 56 . • Press W AIT or TRSF . • Remain off-hook until the person dials 56 from any phone.
CONVENIENCE FEA TURES DO NO T DISTURB Use this feature when you want to block calls to your keyset. • While on-hook, press the DND ke y or dial 401 . The DND ke y flashes to remind you of this mode. • T o cancel DND , press the DND ke y again or dial 400 .
• Dial the extension number of the door phone. • Y ou will be connected to the door phone and y ou can listen or ha ve a conv er- sation. • If an electric door lock release is installed, dial 13 to unloc k the door . NO TE: If the Hot K e ypad f eature has been tur ned off , y ou must first lift the handset or press SPK or the MONIT OR key .
Executive off-hook voice announce allows you to engage in conversation on y our ke yset and simultaneously receiv e and reply handsfree to an OHV A through your add-on module (AOM). Use caution because the conversation through the A OM ma y possibly be heard b y the caller on the k e yset.
SET ANSWER MODE Y ou can receiv e inter nal calls in one of three modes (see Answ ering Intercom Calls under Intercom Calls for descriptions): • While on-hook, press TRSF and then dial 103 . • Dial 0 for Ringing, 1 f or A uto Ans wer or 2 f or V oice Announce.
DISPLA Y FEA TURES INTERA CTIVE DISPLA Y KEYS The three keys below the display are substitutes for dedicated feature keys and access codes. Pressing one of these keys has the same effect as pressing a programmab le k e y . These k e ys are called soft ke ys as their functions are not fix ed.
A UT O TIMER Displa y k eyset users ma y ha v e the timer automatically star t when they ans wer incoming calls or after a shor t delay on an outgoing call. • With the handset on-hook, press TRSF and then dial 110 . • Dial 31 to turn the auto timer on or 30 to turn it off.
T o program a station name: • Press TRSF and then dial 104 . • Enter the 11 character name using the procedure described in Alarm Re- minder Messages .
WHA T IS ANI? ANI (Automatic Number Identification) is a feature offered by some telephone ser vice providers that provides the calling party’ s telephone number .
• Dial the trunk number . • Y ou ma y now answ er the call b y pressing ANS . OR Y ou ma y use NND to vie w more inf or mation about this call. OR Y ou can retur n to the idle condition by pressing IGNORE .
46 PERSONAL SPEED DIAL NUMBERS CODE NAME TELEPHONE NUMBER 0 0 _________________________ _________________________ 0 1 _________________________ _________________________ 0 2 _________________________ .
SYSTEM A CCESS CODES LINE GROUPS P R OGRAMMED MESSA GES 9 LOCAL/LCR 01 IN A MEETING 80 _____________________________ 02 OUT ON A CALL 81 _____________________________ 03 OUT TO LUNCH 82 ______________.
デバイスSamsung LCD 24Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung LCD 24Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung LCD 24Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung LCD 24Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung LCD 24Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung LCD 24Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung LCD 24Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung LCD 24Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung LCD 24Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
