AutostartメーカーCT-5460TWの使用説明書/サービス説明書
ページ先へ移動 of 16
DOC : 1.02 DL Fb March 17, 2006 Manufactu red in Canada by Autostart T W O - W A Y L C D REMOTE STARTER S Y S T E M WITH FULL A A L A R M S Y S T E M F O R M A N U A L T R A N S M I S S I O N V E H I C L E S CT-5460TW User Guide The Transmitter’s Battery: Depending on the usage, the transmitter’s battery can last between 3 to 6 months.
User Guide P. 2 Table of Contents Table of Contents ................................... 2 Introduction ............................................. 3 Remote-Starting Your Vehicle ................ 3 Remote-starting ................................. 3 Vehicle Presets .
User Guide P. 3 Introduction This System is a state-of-the-art remote car starter and alarm combo system. The system is packed with advanc ed features s uch as priority ac cess to the driv er’s door.
P. 4 User Guide 1. Ensure t hat all the doors ar e closed and that the gears hift lever is i n the NEUTRAL posit ion. 2. With the engine already running, apply the parking bra ke and release t he brake pedal. Make sure to release t he brake pedal. 3. Within 20 sec.
User Guide P. 5 To enable Idle Mode: 1. With the engine runni ng, press the LOCK or UNLOCK button (to unlo ck the doors) or the START/STOP button on the remo te control unti l the parking li ghts come on. 2. Remove t he key and exit th e vehicle. The engine will go on running.
P. 6 User Guide Note : With the Remote Valet ac tivated, the remote sta rter and alarm functio ns will be disabled. Start Attempts Indicator (Valet Mode) This reveals start attempts made while the vehicle was in Valet Mode . T he parking lights w ill: Come ON , go OUT ; then Flash twice .
User Guide P. 7 Quick Lockout TM (Also called Secur e Panic .) For fast protection, the system will LOCK all doors when yo u press the brake pedal while the horn is act ivated and the system is in P anic Mode . (Quick Lockout is only available when Panic Mode has been activ ated.
P. 8 User Guide 2. The parking lights will fl ash once and the LED wi ll flash slowly to confirm that the doors have been locked an d that the starter k ill feature is e nabled if it was i nstalled. The horn will give one signal if configured at installation.
User Guide P. 9 Safe Start If this feature is enable d, it will require the user to press the START/STOP button twice within 3 seconds to start t he vehicle. This will e liminate acc idental remote starts (for example, if t here are children playing wi th the transmit ter).
P. 10 User Guide x On models where starter kills were in stalled, pressing the LOCK button will also activate the starter kill. x On alarm models, pressing the LOCK button wi ll also act ivate the monitor ing. The Stop Confirmation Was Not Received If after remote stopping t he vehicle no confir mation was rec eived i.
User Guide P. 11 Your installer can customize the system as to personalize t hese multi-level features in an order that best suits you. Your options are: Option 1: Level 1 (requires pressing the FUNCT.
P. 12 User Guide Using the Remote Control Transmitter may not be exactly as shown. The transmitter offers several command-confirmation and ti mer features. This section explains some of the key transmitter functions that are available. The following section gives a summary of the button combinations used to access those functi ons.
User Guide P. 13 Transmitter Mode Selection FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DES CRIPTION POWER-SAVING MODE + ( + ) Melody Press unlock fi rst and th en press the funct ion button and the lock butt on simultane ously .
P. 14 User Guide Cold Weather Mode Function Button pressed Icon Sound Instructions /description for 1 sec 1 Beep To enter cold weather mode for 3sec 1 Beep Press for 1 second and then pr ess and ho ld for 3 seconds. for 1sec 1 Beep To exit cold weather mode for 3sec None Press for 1 second and then pr ess and ho ld for 3 seconds.
User Guide P. 15 15 minutes 20 minutes 25 minutes 30 minutes LCD Transmitter Operation ( Second Car Control ) Basic Vehicle Operation FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION LOCK + 1 Beep Locks the doors and arms the Starter Kill (if installed) and the alarm.
P. 16 User Guide Diagnostics – Parking Light Flash Table Flashes Description 1 x Doors locked, Alarm and Starter Kill arme d. x End of Run Time. x TRUNK button pressed x Start signal received by the System. x Cold Weather Mode cancelled. 2 x Doors unlocked, alarm and starter Kill disarmed.
デバイスAutostart CT-5460TWの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Autostart CT-5460TWをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAutostart CT-5460TWの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Autostart CT-5460TWの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Autostart CT-5460TWで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Autostart CT-5460TWを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAutostart CT-5460TWの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Autostart CT-5460TWに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAutostart CT-5460TWデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
