SamsungメーカーPS-42D5SDの使用説明書/サービス説明書
ページ先へ移動 of 92
PDP (P LASMA D ISPLA Y P ANEL ) DIGIT AL TELEVISION Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”.
Checking Parts Owner’s Instructions Remote Control/ AAA Batteries Power Cord S-VIDEO Cable PC Cable HDMI Cable HDMI/DVI Cable Scart Cable PC Audio Cable Component Cables (RCA) Sold Separately English - 3 t.
Contents ◆ F OREWORD ■ User Instructions .............................................................................................................. .......... 2 ◆ C ONNECTING AND P REPARING Y OUR D ISPLAY ■ Control Panel...................
Contents (continued) ◆ U SING THE DTV F EATURE ■ Previewing the DTV Menu System ........................................................................................... 54 ■ Updating the Channel List Automatically ............................
➢ Contr ol P anel ➢ The actual configuration of your TV may be different, depending on your model. ➢ ➢ a) b) c) d) e) f) English - 6 Front of the TV Speaker a) SOURCE button Select the external input source. b) MENU button Display the on-screen menu.
Contr ol P anel (continued) ➢ The actual configuration of your TV may be different, depending on your model. Rear Panel ➢ For further details about connection, refer to pages 78~84. ➢ Whenever you connect an audio or video system to your television, ensure that all elements are switched off.
Infrared Remote Contr ol Y yo ➢ English - 8 ➢ The performance of the remote control may be affected by bright light. ➢ Teletext Function : Refer to pages 74-77 for details DIRECT CHANNEL SELECTI.
You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
English - 10 ➢ ◆ Installing the Displa y on the W all At tac hment P anel Wall Bracket Components Plastic Hanger: 4 Screw : 11 Screw : 4 Anchor : 11 W all Bracket Assembly Installation Notes ◆ Contact a technician for installing the wall bracket.
English - 11 Installing the Displa y on the W all At tac hment P anel (continued) 1 Remove the 4 screws on the back of the product. 3 Tighten the 4 screws in step 2 (plastic hanger + screw ) to the rear holes of the product. 2 Insert the screw into the plastic hanger.
In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV.
, n The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. Result : The Standby indicator on the front of the television lights up. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
W se T F amiliarizing Y our self with the Remote Contr ol English - 14 The remote control is used mainly to: ◆ Change channels and adjust the volume. ◆ Set up the television using the on-screen menu system. The following table presents the most frequently used buttons and their functions.
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in standby mode, press the POWER () button on the remote control. Result : The message to start Plug & Play is displayed.
Y de m yo to When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Setup .
You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
You can store television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found. ◆ The programme number of each stored channel which you wish to identify.
Storing Channels Manuall y (continued) 9 If you know the number of the channel to be stored, see the following steps. ◆ Press the … or † button to select Channel . Press the ENTER () button. ◆ Press the … or † button to select C (Air channel) or S (Cable channel).
You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
So r ting the Stored Channels English - 21 This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Channel .
T fr C co aw Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Channel .
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using front panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children.
If as If ch This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal. 1 Press the MENU () button. Result : The main menu is displayed.
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU () b utton. Result : The main menu is displayed.
Y th Displa ying Inf ormation You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the … or † button to select Picture . Result : The Picture menu is displayed.
Your television has several setting options that allow you to control the picture quality. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the … or † button to select Picture . Result : The Picture menu is displayed. 3 Press the ENTER () button.
➢ 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Setup . Result : The Setup menu is displayed. 3 Press the ENTER () button. 4 Press the … or † button to select PC . Press the ENTER () button.
Se t ting the Picture (PC Mode) (continued) ➢ Preset to the PC mode by pressing the SOURCE () button. English - 29 12 Press the … or † button to select Auto adjustment . Press the ENTER () button. Result : The screen quality and position are automatically reset.
English - 30 S electing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU () b u t t on. Result : The main menu is displayed. 2 Press the … or † button to select Picture . Result : The Picture menu is displayed.
Vi e wing the DNIe Demonstration English - 31 √ . F reezing the Current Picture This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe Demo to On, you can view an applied DNIe and a normal picture on the screen, for demonstration purposes.
English - 32 Se t ting the My Colour Contr ol (Easy Control) This feature allows you to adjust colours according to your preferences, by adjusting skin, sky, and grass tones using the predefined settings (Blue, Green, Pink, Standard, and Custom) without affecting other colours on the screen.
English - 33 y Se t ting the My Colour Contr ol (Detail Control) This setting can be adjusted to suit your personal preferences. 1 Press the MENU () b utton. Result : The main menu is displayed. 2 Press the … or † button to select Picture . Result : The Picture menu is displayed.
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. 1 Press the MENU () b u t t on. Result : The main menu is displayed.
English - 35 Using the Colour W eakness Enhancement F eature This feature adjusts the red, green, or blue colour to enhance the picture according to the user's particular colour weakness. 1 Press the MENU () b utton. Result : The main menu is displayed.
Using the Energy S a ving Feature English - 36 This feature adjusts the screen brightness automatically depending on the surrounding lighting conditions. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Picture .
Vi e wing the Picture in Picture (PIP) English - 37 You can display a sub picture within the main picture of a TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input.
English - 38 Vi e wing the Picture in Picture (PIP) (continued) 11 Press the … or † button to select Position . Press the ENTER () button. Result : The following options are available. --- ➢ The Position menu is available when the Size is large ( ) mode.
English - 39 Vi e wing the Picture in Picture (PIP) (continued) o Easy functions of the remote control. Buttons Feature PIP Used to activate or deactivate the PIP function directly.
English - 40 Using the Digital NR (Noise Reduction) F eature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU () button. Result : The main menu is displayed.
English - 41 TV E E E A A A S- S- CO CO P D PIP Pr ev enting S creen Burn-in To reduce the possibility of screen burn, this TV set is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
English - 42 Reducing the Ef fects of Screen Burn If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Setup .
English - 43 Changing the S ound Standard al e g r n Custom You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound .
T p T ex in m English - 44 Customizing the S ound S et tings Your television has several settings which allow you to control the sound quality. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Sound .
Se t ting the T ruSurround XT English - 45 TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.
English - 46 S electing the Internal Mute Se t ting the Melody S ound If you want to hear the sound through separate speakers, cancel the internal amplifier. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Sound .
English - 47 S electing the Sound Mode (depending on the model) The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I ” or “Stereo”, depending on the current transmission.
English - 48 Se t ting and Displa ying the Current T ime You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button.
English - 49 Se t ting the Sleep Timer d f f You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the … or † button to select Setup .
English - 50 S witc hing the T ele vision On and Of f Automaticall y You can set the on or off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select. ◆ Switch off automatically at the time you select.
English - 51 S witc hing the T ele vision On and Of f Automaticall y (continued) 10 Press the … or † button to select Off Timer . Press the ENTER () button. Result : The Off Timer menu is displayed. 11 Select Hour or Minute by pressing the œ or √ button.
Vi e wing an External Signal S ource English - 52 Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top box, and the TV source (broadcast or cable). 1 Press the MENU () button. Result : The main menu is displayed.
Redirecting an Input to the External Output English - 53 V r Your television enables you to choose which audio/video signals are output to the external connector. 1 Press the MENU () b utton. Result : The main menu is displayed. 2 Press the … or † button to select Setup .
English - 54 Pr e vie wing the DTV Menu System Yo Se ➢ The sub-items of the CI Menu may vary depending on the CAM model. (refer to page 72) Now & Next Guide Full Guide Scheduled List Def.
English - 55 Updating the Channel List A utomatically Y ou can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel .
Yo English - 56 Updating the Channel List Manuall y Y ou can specify the channel or frequency for a fast channel search. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel . Result : The Channel menu is displayed.
English - 57 Editing Y our F av ourite Channels Y ou can edit your favourite channels using the colour buttons. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel . Result : The Channel menu is displayed.
English - 58 Editing Y our F av ourite Channels (continued) ◆ Add Y ou can use this function when one or more favourite channels have been selected. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel .
English - 59 Editing Y our F av ourite Channels (continued) ◆ Move 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel . Result : The Channel menu is displayed. 3 Press the ENTER () button. 4 Press the ▲ or ▼ button to select Favourite Channels .
Th ca in as ➢ English - 60 Vi e wing Channel Lists Displa ying P rogramme Inf ormation Y ou can display a list of all channels or your favourite channels. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel .
English - 61 Vi e wing the EPG (Electr onic Pr ogramme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broad- casters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel.
Yo English - 62 Using the S c heduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1 Press the D.
English - 63 Using the S c heduled List (continued) 8 Press the ▲ or ▼ button to select the required frequency ( Once , Daily , or Weekly ). 9 When you are satisfied with your settings, save the adjusted schedule by pressing the red button. Result : The scheduled list is displayed again.
Yo English - 64 Vi ew ing All Channels and F av ourite Channels In the EPG menu, you can display all channels or favourite channels. 1 Press the D.MENU button. Result : The Guide menu is displayed. 2 Press the ENTER () button to select Guide . 3 Press the ▲ or ▼ button to select Now & Next Guide or Full Guide .
English - 65 S electing Category Colours Y ou can change the colours for Categories. 1 Press the D.MENU button. Result : The Guide menu is displayed. 2 Press the ENTER () button to select Guide . 3 Press the ▲ or ▼ button to select Now & Next Guide or Full Guide .
T ch (P T ch English - 66 A djusting the T ranslucenc y Le vel Y ou can set the translucency of the on-screen menu. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Preference . Result : The Preference menu is displayed.
English - 67 Se t ting up the P arental Loc k This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user . The on-screen menu will instruct you to assign a PIN code (you can change it later , if necessary).
Yo p Yo English - 68 Using the P refered F eatures Y ou can use various settings to suit your personal preferences. ◆ Activating/deactivating the Subtitle ◆ Changing the default value for subtitle and audio languages ◆ Activating/deactivating the Digital T ext 1 Press the D.
English - 69 Chec king the Pr oduct Information Y ou can view your product information. For service or repair , please contact a Samsung approved dealer . 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select System .
T English - 70 Upgrading the S of tware (Option) To keep your product up-to-date with new Digital T elevision features then software upgrades are periodically broadcast as part of the normal T elevision signal. It will automatically detect these signals and display the software upgrade banner .
English - 71 Vi e wing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select System . Result : The System menu is displayed.
Yo Y si v English - 72 S electing the CI (Common Interface) Menu This helps the user select an item from the CAM-supported menu. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select System . Result : The System menu is displayed.
English - 73 Reset ting Y ou can reset the values stored to the factory default values. ➢ The Reset operation deletes all channel information and user preferences returning all values to their default factory state. 1 Press the D.MENU button. Result : The DTV menu is displayed.
English - 74 T elete xt Feature Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather.
Displa ying the T elete xt Information English - 75 s You can display Teletext information at any time on your television. ☛ For Teletext information to be displayed correctly, channel reception mus.
English - 76 S electing Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display..
English - 77 S electing a T eletext P age n You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is increased by one and the page is then displayed.
English - 78 Connecting to External Input/Output “ EXT 1 ” is used for the equipment with an RGB output, such as video game devices or video disc players. Rear of the TV or ① Input/Output Specification Connector Input Output Video Audio (L/R) S-Video RGB Video + Audio (L/R) EXT 1 ✔✔ ✔ ✔ Only TV or DTV output is available.
English - 79 Connecting to the A V Output “ AV OUT ” are used for the equipment with an RGB output, such as video game devices or video disc players.
English - 80 Connecting to the RC A Input ➢ The RCA ( VIDEO + AUDIO L /R ) connectors are used for equipment, such as camcorders, video disc players, and some video game devices.
English - 81 Connecting to the Component Input The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i/480p/576i/576p/1080i) DVD Rear of the TV DTV receiver ① ② n Connecting to the PC Input ➢ The “ PC IN ” (video) and “ AUDIO ” connectors are used for interfacing with your PC.
English - 82 Connecting to the HDMI Input Connecting to the HDMI/D VI Compatible ➢ The “ HDMI/DVI IN ” connector is used for equipment with a DVI out. DTV Set-Top Box Rear of the TV ➢ The “ HDMI/DVI IN ” connector is used for equipment with an HDMI out.
English - 83 Connecting to the Common Interface Rear of the TV 1 2 ① COMMON INTERFACE PCMCIA Slot supports the DVB Common Interface (DVB-CI) standard. This connection is provided for future expansion of your Samsung DTV set allowing the installation of DVB-CI compatible peripherals, for example a DVB-CI module to support pay TV services.
Connecting Home Theater S ystem English - 84 Connecting the Home Theater System ① Connect the monitoring audio out L and R jacks of the AV OUT on the rear-side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System (or AV Receiver) using the audio cable.
Se t ting up Y our PC S of tware (Windo ws only) English - 85 The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
Input Mode (PC) English - 86 Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: (N: Negative / P: Positive) ◆ The interlace mode is not supported.
Tr oubleshooting: Before Contacting Service P er sonnel English - 87 ) e No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Blurred or.
English - 88 Memo BN68-00889A-00Eng_74-92(TEL) 4/15/05 1:58 PM Page 88.
Memo English - 89 BN68-00889A-00Eng_74-92(TEL) 4/15/05 1:58 PM Page 89.
English - 90 Memo BN68-00889A-00Eng_74-92(TEL) 4/15/05 1:58 PM Page 90.
Memo English - 91 BN68-00889A-00Eng_74-92(TEL) 4/15/05 1:58 PM Page 91.
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
デバイスSamsung PS-42D5SDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung PS-42D5SDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung PS-42D5SDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung PS-42D5SDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung PS-42D5SDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung PS-42D5SDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung PS-42D5SDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung PS-42D5SDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung PS-42D5SDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。