SamsungメーカーPS50A476P1Dの使用説明書/サービス説明書
ページ先へ移動 of 59
Plasma TV user manual BN68-01422D-01 BN68-01422D imagine the possibilities Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product.
English - 2 © 2008 Samsung Electronics Co., Ltd. All rights reserved. User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention.
English - 3 Symbols ☛ ➢ Press Important Note Contents General Information User Instructions ............................................. 2 Checking Parts ................................................ 4 Using the Stand-Base ........
English - 4 Checking Parts Owner ’s Instructions Remote Control/ AAA Batteries Power Cord Cloth-Clean Cover-Bottom / Screws (2ea) (Refer to page 52) Ferrite Core for Power Cord Ferrite Core for S-Vi.
English - 5 Control Panel 1 SOURCE T oggles between all the available input sources ( TV , Ext.1 , Ext.2 , A V , S-Video , Component , PC , HDMI1 , HDMI2 , HDMI3 and DTV ). ➢ In the on-screen menu, use this button as you would use the ENTER button on the remote control.
English - 6 Connection Panel Continued... ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable.
English - 7 9 HDMI IN 1,2 − Noadditional Audioconnectionisneeded for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English - 8 V iewing the Remote Control ➢ The performance of the remote control may be affected by bright light. 1 POWER button (turns the TV on and of f) 2 Selects the TV and DTV mode directly 3 Nu.
English - 9 Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “ + ” and “ – ” ends of the batteries with the diagram inside the compartment.
English - 10 Plug & Play Feature When the television is initially powered on, several basic customer settings proceed automatically and subsequently . The following settings are available. ☛ If you accidentally select the wrong country for your TV , the characters on the screen may be wrongly displayed.
English - 11 7 Select No pressingthe◄or►button,thenpressthe ENTER button. Auto Store menu is displayed. 8 Press the ENTER button to start search the channels. The channel search will start and end automatically . After all the available channels are stored, Clock Set menu is automatically displayed.
English - 12 V iewing an External Signal Sources Y ou can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-T op Box, and the TV source (broadcast or cable). 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Input , then press the ENTER button.
English - 13 Editing Device Names Y ou can give a name to the external source. 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Input , then press the ENTER button. 3 Pressthe▲or▼buttontoselect Edit Name , then press the ENTER button.
English - 14 Storing Channels Manually ➢ Not available in DTV or external input mode. Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: Whether or not to store each of the channels found.
English - 15 Adding / Locking Channels ➢ Not available in DTV or external input mode. Using the Channel Manager , you can conveniently lock or add channels. 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Channel , then press the ENTER button.
English - 16 Sorting the Stored Channels ➢ Not available in DTV or external input mode. This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1 Press the MENU button to display the menu.
English - 17 Fine T uning Channel Reception ➢ Not available in DTV or external input mode. If the reception is clear , you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually .
English - 18 Customizing the Picture Settings Y our television has several setting options that allow you to control the picture quality . 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Press the ENTER button again to select Mode .
English - 19 Configuring Detailed Settings on the Picture Y ou can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Pressthe▲or▼buttontoselect Detailed Settings , then press the ENTER button.
English - 20 Picture Options Y ou can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Pressthe▲or▼buttontoselect Picture Options , then press the ENTER button.
English - 21 Screen Mode: 16:9/W ide Zoom/Zoom/4:3 When setting the picture size to Auto Wide in a 16:9 wide TV , you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
English - 22 ➢ Optimum condition for pixel shift; PC TV/Ext/A V/Component/HDMI/DTV Horizontal Dot 1 2 V ertical Line 1 2 Time (minute) 2 2 min ➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode. ➢ This function is not available in the Just Scan mode.
English - 23 1 Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer . 2 Connect a 3.5mm Stereo/2RCA cable between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer .
English - 24 Resetting the Picture Settings to the Factory Defaults Y ou can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Pressthe▲or▼buttontoselect Reset , then press the ENTER button.
English - 25 Sound Features 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Sound , then press the ENTER button. 3 Selecttherequiredoptionbypressingthe▲or▼button,then press the ENTER button.
English - 26 Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When pow er is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the current transmission.
English - 27 T ime Features 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Setup , then press the ENTER button. 3 Pressthe▲or▼buttontoselect Time , then press the ENTER button.
English - 28 Language / Melody / Light Effect / Entertainment / Energy Saving 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Setup , then press the ENTER button. 3 Selecttherequiredoptionbypressingthe▲or▼button,then press the ENTER button.
English - 29 Setting up Y our PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below . But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
English - 30 Input Mode (PC) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: D-Sub In.
English - 31 Setting the PC ➢ Preset to the PC mode by pressing the SOURCE button. 1 Press the MENU button to display the menu. 2 Pressthe▲or▼buttontoselect Picture , then press the ENTER button. 3 Selecttherequiredoptionbypressingthe▲or▼button,then press the ENTER button.
English - 32 Previewing the DTV Menu System ➢ The company does not guarantee the normal operation of the DTV menu for countries other than the 8 supported countries (United Kingdom, France, Germany , Italy , Netherlands, Spain, Switzerland, Austria) because only these country standards are supported.
English - 33 Language Audio Language Subtitle Language T eletext Language Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary T eletext Language Secondary T eletext Language (depending on the Country) ➢ The sub-items of the CI Menu may vary depending on the CAM model.
English - 34 Operating the DTV Menu Viewing the DTV Menu After installing your antenna system and TV with appropriate connectors. Plug in the AC main power and switch on the TV . Press the MENU button to display the menu. Pressthe▲or▼buttontoselect Digital Menu , then press the ENTER button.
English - 35 Press the red button to start the scan for digital services. When it has finished, channels are updated in the channel list. ➢ Y ou can input by pressing the button on the remote control. ➢ Y ou can not change only frequency and when changing a channel the Frequency will be automatically changed.
English - 36 1.5 Channel List Y ou can display a list of all channels or your favourite channels. Pressthe▲or▼buttontoselect Channel List , then press the ENTER button. ➢ It can be displayed simply by pressing the CH LIST button.
English - 37 T oviewprogrammeinformation,pressthe▲/▼/◄/►buttontoselectaprogrammeofyour choice, then press the INFO button.
English - 38 2.4 All Channels and Favorite Channels In the EPG menu, you can display all channels or favourite channels. Press the green button repeatedly to toggle between the all and favourite channels list. When the favorite channel list has not been set up: − The favorite list is empty .
English - 39 3.2 Preference This menu consists of 6 sub-menus: Primary Audio Language , Secondary Audio Language , Primary Subtitle Language , Secondary Subtitle Language, Primary T eletext Language , and Secondary T eletext Language (depending on the Country).
English - 40 4. Setup This menu consists of 1 1 sub-menus: Menu T ransparency , Change PIN , Parental Lock , Subtitle, Subtitle Mode , Audio Format , Audio Description , Digital T ext , Time Zone, Common Interface and System . 4.1 Menu T ransparency Y ou can set the translucency of the on-screen menu.
English - 41 4.3 Subti tle / Sub tit le Mo de / Aud io Fo rma t / Aud io Des cri pti on / Digital T ext Y ou can use various settings to suit your personal preferences.
English - 42 4.5 Common Interface − Installing the CI Card Purchase the CI CAM module by visiting your nearest dealer or by phone. Insert the CI CARD into the CAM in the direction of the arrow until it fits. Insert the CAM with the CI CARD installed into the common interface slot.
English - 43 − Software Upgrade (Option) T o keep your product up-to-date with new digital television features then software upgrades are periodically broadcast as part of the normal television signal. It will automatically detect these signals and display the software upgrade banner .
English - 44 What is Anynet + ? Anynet + is an A V network system that enables an easy-to-use A V interface for users by controlling all connected A V devices through the Anynet + menu when Samsung Electronics A V devices are connected. Connecting Anynet + Devices The Anynet + system supports A V devices supporting Anynet + only .
English - 45 Setting Up Anynet + The following settings are to use Anynet + functions. Using the Anynet + Function 1 Press the MENU button to display the menu. Pressthe▲or▼buttontoselect Input , then press the ENTER button.
English - 46 Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV . Anynet + Menu Description View TV Switches from Anynet + to TV broadcast mode. Select Device Y our TV connects to the corresponding device.
English - 47 Listening through a Receiver Y ou can listen to sound through a receiver instead of the TV speaker . 1 Press the MENU button to display the menu.
English - 48 T eletext Feature (depending on the model) Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 49 The teletext pages are organized according to six categories: Part Contents A B C D E F Selected page number . Broadcasting channel identity . Current page number or search indications. Date and time. T ext. Status information. F ASTEXT information.
English - 50 W all Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor . When attaching to other building materials, please contact your nearest dealer . If installed on a ceiling or slanted wall, it may fall and result in severe personal injury .
English - 51 Entering the menu 1 Pressthe▲,▼,◄or►buttononyourremotecontrol. ➢ The W all Mount Adjustment screen is displayed. ➢ If the W all Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV , use the menu to display that screen.
English - 52 How to assemble the Stand-Base (depending on the model) Using the 6 screws for securing the stand base and the monitor , firmly attach the monitor to the stand base.
English - 53 Securing the TV to the W all Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular , ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over , causing serious injuries or death.
English - 54 T roubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of the television and contact your local dealer .
English - 55 Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. T o ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
IMPORT ANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Th i s p ag e i s i n t e n t i o n a l l y l e f t b l a n k . BN68-01422D-Eng.indb 58 2008-04-18 오후 1:27:50.
Correct Disposal of This Product ( W aste E lectrical & E lectronic E quipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスSamsung PS50A476P1Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung PS50A476P1Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung PS50A476P1Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung PS50A476P1Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung PS50A476P1Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung PS50A476P1Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung PS50A476P1Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung PS50A476P1Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung PS50A476P1Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。