SamsungメーカーSCC-C6407(P)の使用説明書/サービス説明書
ページ先へ移動 of 32
P a r t : AB68-00547A(00) Pr inted in China SCC-C6407(P) E D F Es I Smar tDome Camer a Owner’s Instr uctions Be n utz erhandb u c h M a n uel d’instr uction Ma n ual del usuar i o Istr uzioni per .
E Impor tant Saf ety Instructions Safety Precautions The purpose of this information is to ensure proper use of this product to prevent danger or damage to property.
6 . Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) 7 . Do not install the unit in humid, dusty, or sooty locations.
1-2 E 1-1 Bef ore Usage This is a basic instr uction man ual fo r t he SCC-C6407(P) user. It contains all the instr uctions needed to use the SCC-C6407(P) from a simple introduction of the control locations and functions of the SCC-C6407(P) to installation methods in the set up menu.
1-4 E 1-3 4. ZONE SET ..................................................................................3-19 - PRIVACY ZONE .......................................................................3-19 - STYLE ...........................................
1-6 E 1-5 SCC-C6407(P) Introduction SCC-C6407(P) is a z oom lens built in smar t dome camer a which p r o vides y ou with the best monitor ing function in connection with CCTV at banks or companies. The SCC-C6407(P) is a high quality sur v ei llance camera using x32 zoom lens and digital z oom IC, it can catch clear images up to 320 times .
1-8 E 1-7 BA C K Locations of Control FRONT.
1-10 E 1-9 INITIAL SETTING CAMERA ADDRESS SETUP Use SW701, SW702, or 703 for Camera Address setup. You may allocate up to 255 addresses by using SW701 to set the 3rd digit, SW702 the 2nd digit, and SW703 the 1st digit. EX) In case of Camera Address 1, see the following figure for setup.
2-1 E 1-11 Setting RS-422A/RS-485 termination 1 2 As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature o.
To install and use the SCC-C6407(P), the following cables should be prepared. P o wer Adapter Cable The cable that plugs into the SCC-C6407(P) power input receptacle has the rated voltage of AC24V, 1.5A. Check the rated voltage before using the cable.
Installing SCC-C6407(P) Installation Precautions 1) Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6407(P) SmartDome Camera and other accessories. 2) Install in an area where the space above the ceiling board is over 18 cm (7 in.
5) CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling. 6) POLE MOUNT ADAPTOR (SADT-100PM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-100WM) to a pole that is over 8 cm (2.
2-9 E 2-8 7 . [Figure 7] Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it left about 15 degrees. (Check the sound of LOCKING and that the LEVER-LOCKING is in place) * Use the screws (BH M3 x L8) to connect the CAMERA and the ADAPTER so they don't move.
3-2 E 3-1 Structure of the Setup Menu In this chapter, w e will look o v er the Setup Men u of the SCC-C6407(P), First w e'll look o v er the o v er all str ucture of the Setup Men u, and then we'll look at the functions of each men u . Chapter 3 Setup Menu Overview CAMERA SET CAMERA ID O N.
3-3 3-4 E 1. CAMERA SET MENU CAMERA ID The CAMERA ID menu assigns an ID to the SCC-C6407(P) to be displayed on the connected monitor.On the CAMERA SET menu screen, select CAMERA ID to ON and press [Enter]. You will see the sub screen for deciding on the ID of the SCC-C6407(P).
3-5 3-6 E COLOR/BW In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. In a poor illumination environment, the IR filter is turned off in the BW mode the its sensitivity increases as high as a black and white camera. On the other hand, the IR filter is turned on and the sensitivity decreases in the COLOR mode.
3-8 E 3-7 ➜ Press [Enter] (CAMERA SET) CAMERA ID OFF V-SYNC INT COLOR/BW AUTO... MOTION DET OFF ZOOM SPEED 0 DIGITAL ZOOM 0 EXIT QUIT In AUTO mode, AGC will operates in high speed mode, and you cannot change it manually, as it is indicated by "---".
3-10 E EXIT The EXIT menu is used to quit the CAMERA SET menu of the SCC-C6407(P) and return to the MAIN MENU. - QUIT : Ignores the changed information and restores the saved information. - SAVE : Saves the information of the setting condition of the menu.
3-12 E 3-11 SHUTTER You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image.
3-14 E 3-13 WHITE B AL Lights are generally denoted as color temperatures and expressed in Kelvin ( K ) units. The general light color temperatures are shown below. Blue sky Rainy Cloudy Partly Cloudy Sunny Fluorescent lamp Tungsten lamp Candlelight Halogen lamp 1000K 2000K 3000K 4000K 5000K 6000K 7000K 8000K 9000K 10000K (VIDEO SET) IRIS ALC.
3-16 E 3-15 FOCUS MODE In the FOCUS MODE MENU, the Focus method can be set to AF, MF, or ONEAF. - AF : With AUTO FOCUS MODE, you can monitor the screen continuously and it will focus automatically. While moving the zoom keys, it will automatically focus so FOCUS key input is not necessary.
3-18 E 3-17 POSITION SET From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu. PRESET ID This is the ID set up function for each PRESET.
3-20 E 3-19 BLANK ALL BELO W The available angle for setup ranges from OFF/0/-10 to -90 and the area below a set angle will be regarded as the ZONE area. PRIV A CY ZONE MAP Press [ENTER] to enter the PRIVACY ZONE MAP screen from “PRIVACY ZONE MAP ON.
3-22 E 3-21 REVERSE The REVERSE function applies PRIVACY MASK to the other area than set as a privacy zone. ON/OFF is available. ZONE DIR SET/ZONE AREA SET This function indicates the ID or direction depending on the set value when PAN of SCC-C6407(P) is located in a specific area.
3-24 E 3-23 LOCA TION The “LOCATION...” menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start position and press [ENTER]. Move PAN again to select a end position and press [ENTER]. Now, ZONE AREA setup is complete.
3-26 E 3-25 DIRECTION This sets up the movement direction of the START to END location (PAN location standard) "RIGHT " : "LEFT " : ENDLESS This is a 360-degree rotation function that stops for the DWELL TIME only in the START and END positions without running between the START and END positions.
3-28 E 3-27 A UT O PLA Y AUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when there is no camera action after AUTO RETURN finishes. A UT O RETURN This menu sets up the time during which AUTO PLAY repeats.
3-30 E 3-29 7. O THER SET PROPOR TIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOON TELE mode even in the same manual operation.
3-32 E 3-31 ➜ Press [Enter] * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... 8. SYSTEM INFO This menu allows you to check S/W version, communication protocol, baud rate, and address of SCC-C6407(P).
3-34 E 3-33 * SCC-C6407(P) has two FANs inside for preventing overheating. If FAN doesn't work properly, messages below will be displayed. In those case, replace the FAN. - CAMERA FAN ERROR ! : This message is displayed when the FAN which is connected with camera of SCC-C6407(P) does not work properly.
3-36 E 3-35 SCC-C6407P Contents - Zoom lens single body WDR SmartDome CAMERA - AC 24 ± 10% (50Hz ± 0.3Hz) - 22W - PAL STANDARD COLOR SYSTEM - 1/4 inch WDR compatible Exview HAD CCD - 752(H) x 582(V).
Cautions • The cop y r ight of the man ual belongs to Samsung Electronics Co ., Ltd. • Without the per mission of Samsung Electronics it cannot be reproduced electronically , mechanically , audib l y , or b y any other method. • This man ual will be modified according to product enhancements.
デバイスSamsung SCC-C6407(P)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung SCC-C6407(P)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SCC-C6407(P)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SCC-C6407(P)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SCC-C6407(P)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SCC-C6407(P)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SCC-C6407(P)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SCC-C6407(P)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SCC-C6407(P)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
