SamsungメーカーSNC-B2335Pの使用説明書/サービス説明書
ページ先へ移動 of 111
SNC-B2335(P) imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www.
2_ overview overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
English _3 ● OVERVIEW Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fi re or electric shock. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center.
overview 4_ overview CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
English _5 ● OVERVIEW FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
overview 6_ overview IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
English _7 ● OVERVIEW OVERVIEW 2 6 Important Safety Instructions 9 Product Features 9 Precautions – Installation And Use 9 Recommended PC Specifi cations 10 What’s Included 11 At a Glance CONTE.
overview 8_ overview WEB VIEWER 42 42 Connecting to the camera 43 Login 44 Installing ActiveX 45 Using the Live Screen 46 Backup 49 Using the SD Search Viewer Screen SETUP SCREEN 50 50 Accessing the S.
English _9 ● OVERVIEW PRODUCT FEATURES Support various communication protocols Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various internet protocols such as ARP, HTTP, HTTPS and DHCP. Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment.
overview 10_ overview Compatible IP Routers Linksys D-Link Netgear Compatible PoE Switches Linksys SRW224G4P D-Link DES-1316 SMC SMCPWR-INJ3 WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package.
English _11 ● OVERVIEW AT A GLANCE Front Side Item Description Camera Holder (Mount) Holes Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket. Auto Iris Lens (Optional) Installed on the lens adaptor.
overview 12_ overview Rear Side Item Description SD Memory Card Compartment Compartment for the SD memory card. Audio Out terminal AUDIO OUT Terminal for audio output. AUDIO IN Terminal for audio input. System, Power Indicators SD ON: A memory card is inserted and operates normally.
English _13 ● OVERVIEW Reset Button Resets the camera settings to the default. Press and hold it for about 3 seconds to turn off the system indicator and restart the system. Power Port Used to plug the power cable. GND Used for earth-grounding. Network Port Used to connect to the Network cable.
14_ installation & connection installation & connection MOUNTING THE LENS Disconnect the power before proceeding. Mounting the CS lens Turn the optional CS lens clockwise to insert it. Mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens.
English _15 ● INSTALLATION & CONNECTION Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.
installation & connection 16_ installation & connection Removing an SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.
English _17 ● INSTALLATION & CONNECTION Memory Card Use SD and SDHC memory cards feature a switch that disables writing data on to the media. Having this switch to the Lock position will prevent accidental deletion of data stored in the memory card but at the same time will also prevent you from writing data on to the media.
installation & connection 18_ installation & connection CONNECTING WITH OTHER DEVICE Connecting to the monitor Connect the [ VIDEO ] port of the camera to the video input port of the monitor. Network Connection Connect the Network cable to the local network or to the Internet.
English _19 ● INSTALLATION & CONNECTION Connecting to Audio Input/Output Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifi er that the microphone is connected to. Direct Mic Connection : Set Audio Input Gain high (10).
installation & connection 20_ installation & connection Audio I/O Block Diagram Audio Codec G.711 PCM. µ-law 64kbps 8kHz sampling Full duplex Audio Audio in Used for mono signal line input (Max.2.4 Vpp) Audio out Used for mono signal line output (Max.
English _21 ● INSTALLATION & CONNECTION Connecting to the I/O port box Connect the Alarm I/O signal to the corresponding port of the rear port box. ALARM IN 1, 2 : Used to connect the alarm input signal. GND : Used for earth-grounding. ALARM OUT 1, 2 : Used to connect the alarm output signal.
22_ camera setup camera setup You can configure the camera settings using the Web Viewer. For accessing the Web Viewer, refer to " Network Connection and Setup ". (page 31) HOW TO USE THE MENU KEY Follow the steps below if you run the Web Viewer for setting the menus.
English _23 ● CAMERA SETUP MAIN MENU You can configure the camera settings to your preference. PROFILE You can select a mode that is appropriate to the camera installation environment. CAMERA SET Confi gure the camera functions and settings. PRIVACY ZONE You can confi gure the privacy settings.
24_ camera setup camera setup CAMERA SETUP You can configure the general settings of the camera module. For selecting and saving each menu item, refer to " How to use the menu key ". (page 22) CAMERA ID Provide the ID and position for a camera that displays on the screen.
English _25 ● CAMERA SETUP MOTION You can specify a level of AGC for controlling the camera motion. Select F.FAST if you want to monitor a very fast moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same condition.
26_ camera setup camera setup DAY/NIGHT You can specify a recording mode according to the scene. Select < CAMERA SET > - < DAY/NIGHT >. Select a screen transition mode according to the illumination, and set options as appropriate. DAY : Fixed to DAY mode, regardless of the scene.
English _27 ● CAMERA SETUP According to the specifi ed recording mode, select a WHITE BAL mode with necessary options. BRIGHTNESS : Specify a brightness level triggering the switch from DAY to NIGHT mode. MODE : According to the selected mode, you can adjust the RED and BLUE color level.
28_ camera setup camera setup PRIVACY ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. For selecting and saving each menu item, refer to " How to use the menu key ". (page 22) ZONE SETUP Select < MAIN MENU > - < PRIVACY ZONE >.
English _29 ● CAMERA SETUP OTHERS You can reset the camera, or select the OSD font color to your preference. For selecting and saving each menu item, refer to " How to use the menu key ". (page 22) FACTORY DEFAULT Select < MAIN MENU > - < OTHER SET > - < FACTORY DEFAULTS >.
30_ camera setup camera setup SYSTEM INFO You can check the system information. For selecting and saving each menu item, refer to " How to use the menu key ". (page 22) Select < MAIN MENU > - < SYSTEM INFO >. The current system information is displayed.
English _31 ● NETWORK CONNECTION AND SETUP network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA TO AN IP ROUTER WITH THE XDSL/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops.
32_ network connection and setup network connection and setup Checking if the IP router is connected to the xDSL/Cable modem properly Select <Status> from the Settings menu of the IP Router If it is properly connected, < IP Address >, < Subnet Mask > and < Gateway > provided by your ISP are displayed.
English _33 ● NETWORK CONNECTION AND SETUP ex2) If the address (LAN IP) of the IP router is 192.168.0.1 IP address: 192.168.0.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.1 ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1 IP address: 192.
34_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN Launch an Internet browser on the local PC. Enter the IP address of the camera in the address bar of the browser.
English _35 ● NETWORK CONNECTION AND SETUP IP ADDRESS SETUP Buttons used in IP Installer Item Description Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search.
36_ network connection and setup network connection and setup IPv4 Scans for cameras with the IPv4 setting. IPv6 Scans for cameras with the IPv6 setting. Search Scans for cameras that are currently connected to the network. However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
English _37 ● NETWORK CONNECTION AND SETUP If using an IP router : IP Address : Enter an address falling in the IP range provided by the IP router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 Subnet Mask : The < Subnet Mask > of the IP router will be the < Subnet Mask > of the camera.
38_ network connection and setup network connection and setup If the IP router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other. Category Camera #1 Camera #2 IP related settings IP Address Subnet Mask Gateway 192.
English _39 ● NETWORK CONNECTION AND SETUP Enter the password. This is the login password for the " root " user who accesses the camera. The default password is " 4321 ". Click [ OK ]. Auto network setup will be completed. The camera will automatically complete the network setting and restart.
40_ network connection and setup network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed an IP router with a camera connected, you must set the port range forwarding on the IP router so that a remote PC can access the camera in it.
English _41 ● NETWORK CONNECTION AND SETUP CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC Launch < IP Installer >. It will scan for connected cameras and display a list of them. Double-click a camera to access. The Internet browser starts and connects to the camera.
web viewer 42_ web viewer CONNECTING TO THE CAMERA Normally, you would Launch the Internet browser. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.200 http://192.168.1.200 - the Login dialog should appear.
English _43 ● WEB VIEWER To check the DDNS address The DDNS address consists of: <one of the lower-case letters: c, m, p> + <the last 6 digits of the MAC (Ethernet) address> + <websamsung.
web viewer 44_ web viewer INSTALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. For Windows XP Service Pack 2 users Click the installation message that pops up when you fi rst access the camera.
English _45 ● WEB VIEWER USING THE LIVE SCREEN Item Description SD Search Moves to the screen for searching event images from the SD card. Setup Move to the Setup screen. About You can check the firmware version, serial number and manufacturer information.
web viewer 46_ web viewer Camera OSD Used to retrieve and customize the Camera Setup menu. For selecting and saving each menu item, refer to " How to use the menu key ". (page 22) Audio Check the Listen or Speak check box for Audio. Viewer Screen Displays the Live video on the screen.
English _47 ● WEB VIEWER To print out the screenshot Click [ ] on the scene to print out. The Print setup dialog appears. Specify the name of the printer connected, and click [ OK ]. To record a video Click [ ] on the scene to record. You will see the Save AVI dialog; provide the necessary information.
web viewer 48_ web viewer Default fi le path Windows XP : C:Program FilesSamsungSNC-B2335VideoClipLive If you want to change the path, click [ Set path ( )] and specify a path. Windows Vista : C:users[UserID]AppDataLocalLowSamsungSNC-B2335 VideoClipLive On the Windows Vista system, the path to save is fi xed.
English _49 ● WEB VIEWER USING THE SD SEARCH VIEWER SCREEN Click < SD search > tab in the Live screen. The SD Search Screen appears. SD Search Viewer Screen layout Name Function and description Thumbnail Size The thumbnail images are displayed based on the selected size.
50_ setup screen ACCESSING THE SETUP SCREEN You can configure the default setting, system, overlay, event and network related settings, and change them as necessary.
English _51 ● SETUP SCREEN Target bitrate : Transfers video signal at a specifi ed bit rate. Compression : Adjust the compression rate from 5 through 100 by 5. Encode priority : Set the video transfer method to Frame rate or Quality. GOP* size : Select a GOP size between 5 and 15.
setup screen 52_ setup screen MAC address : Displays the Ethernet MAC address. This is used for creating a DDNS address. IP address : Displays the current IP address. Subnet mask : Displays the < Subnet mask > for the set IP. Gateway : Displays the < Gateway > for the set IP.
English _53 ● SETUP SCREEN To set the user account Click < Basic > - < User >. The User setup window appears. Login authentication : You can set to authenticate the login by the user.
setup screen 54_ setup screen To edit a registered user account From the User setup window, select a user ID to change. From the User setup window, click [ Modify ]. The Modify user window appears. Change the < User ID >, < Password >, < Confi rm password >, and < Level > as you wish.
English _55 ● SETUP SCREEN SYSTEM SETUP To set the date/time You can obtain the current system time from the NTP server or your PC for your time setting. Select < System > - < Date & Time >. The Date & Time setup window appears. If you select Manual, input the date and time manually.
setup screen 56_ setup screen To check the log information Select < System > - < Log >. The Log information list appears. System log list : Shows the log information about the system changes along with time and IP address.
English _57 ● SETUP SCREEN When the software update is completed, you will be prompted to restart the system. Click [ OK ] to restart the system. Since the current connection is disconnected, you have to connect to the system again.
setup screen 58_ setup screen To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”. When done, click [ Apply ]. The web viewer will switch to the set secure connection system.
English _59 ● SETUP SCREEN Show time : Set to display the time information on the bottom screen. Output Format : Select a display format of the time information. 24hr : Displays the time in the 24-hour format. 12hr : Displays the time in the 12-hour format.
setup screen 60_ setup screen Use passive mode : Select this option when the passive mode connection is inevitable due to the fi rewall or FTP server setting. FTP server address : Enter the IP address of a FTP server to which an alarm image will be transferred.
English _61 ● SETUP SCREEN To setup the record Click < Event > - < Record setup >. The Record setup window appears. To complete the setting, click the [ Apply ] button. The settings are saved. SD card : Enables you to verify data saved on the SD memory card and format the memory card itself.
setup screen 62_ setup screen Post-alarm duration : The post alarm duration can be one among 5 seconds, 10 seconds, 15 seconds, and 30 seconds. You can send a post-alarm image of up to 30 seconds after the alarm is triggered. (The max time differs, depending on the frame rate) The pre/post alarm duration is not available in SMTP transfer mode.
English _63 ● SETUP SCREEN To Set Intelligent Video Analysis Click < Event > - < Intelligent video analysis >. The Intelligent Video Analysis screen appears. When done, click [ Apply ]. Your settings will be saved. IV analysis function : Activated if < Enable > is selected, deactivated if < Disable > is selected.
setup screen 64_ setup screen Set rules You can set the event rules. Virtual line based rules : You can confi gure event rules for up to 3 virtual lines.
English _65 ● SETUP SCREEN Activation time : Sets the operation time of the intelligent video analysis. Always : Confi gured action is performed whenever an intelligent video analysis event occurs. Only scheduled time : Confi gured action is performed when intelligent video analysis event occurs during the specifi ed time period.
setup screen 66_ setup screen NETWORK SETUP To set the video transfer mode You can control the transfer rate according to the video transfer mode and network speed. Select < Network > - < Streaming type >. The Video Transfer setup window appears.
English _67 ● APPENDIX PROFILE CAMERA SETUP MENU STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Parent Menu Sub-menus IRIS ALC ALC ALC ALC ALC ALC ----- LENS DC DC DC DC DC LEVEL 00000 BACKLIGHT OFF OFF WDR OFF OFF MOTION (F.FAST) --- (F.FAST) --- NORM (F.
appendix 68_ appendix TERMINOLOGY GOP : You can set between 5 and 15 for the MPEG4 and H.264 CODEC. The default is 15, and if set to 15, one I-Frame will be output per 15 frames as one I-Frame and 14 P-Frames constitute the GOP.
English _69 ● APPENDIX Filtering range The filtering range is calculated based on IP address and subnet mask provided by user as follows: The subnet value defi nes the number of masked bits, which will mask the IP address that is converted into 32-bit binary; rest of masked out bits are ignored to produce the range as shown below.
appendix 70_ appendix SPECIFICATIONS Item Description NTSC PAL Camera Type Color/BW Color Image Device 1/3" Super-HAD PS CCD Pixels Total 811 x 508 795 x 596 Effective 768 x 494 752 x 582 Scanning System Progressive Horizontal Frequency 15.734 Hz 15.
English _71 ● APPENDIX Item Description NTSC PAL Resolution Horizontal 600 TV Lines Vertical 350 TV Lines Video Output Video Output VBS 1.0Vp-p S/N Ratio S/N Ratio about 52 dB Lens Lens Drive Type M.
appendix 72_ appendix Item Description NTSC PAL Protocol IP IPv4 / IPv6 Network Protocol IPv4 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1.
English _73 ● APPENDIX Item Description NTSC PAL SDK HTTP API CGI Command Provides functionality to control cameras and set/retrieve internal parameter values. Get JPEG image or MJPEG stream Alarm In/Out control RTP/RTSP API RTP Header, RTSP Command Document ActiveX SDK ActiveX API for viewing data streams from IP camera.
appendix 74_ appendix FRAME RATE (NTSC) Test Condition: MJPEG - Resolution(CIF), Quality(1), Frame rate(1) H.264 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rate), GOP size(15), Deb.
English _75 ● APPENDIX H.264 (4CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 2298 Kbps 19 FPS 1229 Kbps 10 FPS 737 Kbps 6 FPS 369 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1751 Kbps 19 FPS .
appendix 76_ appendix MPEG4 (VGA) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 4055 Kbps 22 FPS 2580 Kbps 14 FPS 1290 Kbps 7 FPS 737 Kbps 4 FPS 221 Kbps 1 FPS LEVEL9 3533 Kbps 23 FPS 230.
English _77 ● APPENDIX H.264 (VGA) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 2089 Kbps 17 FPS 1229 Kbps 10 FPS 737 Kbps 6 FPS 369 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1659 Kbps 18 FPS 1.
appendix 78_ appendix MPEG4 (CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 1382 Kbps 30 FPS 691 Kbps 15 FPS 369 Kbps 8 FPS 184 Kbps 4 FPS 55 Kbps 1 FPS LEVEL9 1152 Kbps 30 FPS 576 Kb.
English _79 ● APPENDIX H.264 (CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 922 Kbps 30 FPS 461 Kbps 15 FPS 215 Kbps 7 FPS 123 Kbps 4 FPS 37 Kbps 1 FPS LEVEL9 691 Kbps 30 FPS 346 K.
appendix 80_ appendix FRAME RATE (PAL) Test Condition: MJPEG - Resolution(CIF), Quality(1), Frame rate(1) H.264 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rate), GOP size(15), Debl.
English _81 ● APPENDIX H.264 (4CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 2359 Kbps 16 FPS 1180 Kbps 8 FPS 737 Kbps 5 FPS 442 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1991 Kbps 18 FPS 1.
appendix 82_ appendix MPEG4 (VGA) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 4424 Kbps 20 FPS 2654 Kbps 12 FPS 1327 Kbps 6 FPS 664 Kbps 3 FPS 221 Kbps 1 FPS LEVEL9 3871 Kbps 21 FPS 221.
English _83 ● APPENDIX H.264 (VGA) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 2507 Kbps 17 FPS 1327 Kbps 9 FPS 737 Kbps 5 FPS 442 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1991 Kbps 18 FPS 12.
appendix 84_ appendix MPEG4 (CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 1382 Kbps 25 FPS 664 Kbps 12 FPS 332 Kbps 6 FPS 166 Kbps 3 FPS 55 Kbps 1 FPS LEVEL9 1152 Kbps 25 FPS 553 Kb.
English _85 ● APPENDIX H.264 (CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 922 Kbps 25 FPS 442 Kbps 12 FPS 221 Kbps 6 FPS 111 Kbps 3 FPS 37 Kbps 1 FPS LEVEL9 691 Kbps 25 FPS 332 K.
appendix 86_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. Check to make sure that the camera’s Network settings are appropriate.
English _87 ● APPENDIX PROBLEM SOLUTION No JPEG file is transferred via FTP/ SMTP on occurrence of intelligent video analysis event of camera even when the <Intelligent Video Analysis> is set to <Enable>. Verify the settings in the following sequence: A.
GPL/LGPL SOFTWARE LICENSE This product uses open-source software distributed under the terms of GPL and LGPL. And you can visit at www.samsungsecurity.
to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.
You should have received a copy of the GNU General Public License along with this program ; if not, write to the Free Software Foundation, Inc.,51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail.
that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
1. Source Code. The “source code” for a work means the preferred form of the work for making modifi cations to it. “Object code” means any non-source form of a work.
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with re.
reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source.
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and fi nall.
In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement).
14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non- free programs.
Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you .
Once this change is made in a given copy, it isirreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above) ; and, if the work is an executable linked with the Libra.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library ; if not, write to the Free Software Foundation, Inc.
This product includes cryptographic software written by Eric Young (eay@ cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C)1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.
デバイスSamsung SNC-B2335Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung SNC-B2335Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SNC-B2335Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SNC-B2335Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SNC-B2335Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SNC-B2335Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SNC-B2335Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SNC-B2335Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SNC-B2335Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。