SamsungメーカーTX-R2028, TX-R2035, TX-R1635の使用説明書/サービス説明書
ページ先へ移動 of 48
Owner’ s Instructions COLOR TELEVISION TX-R2028 TX-R2035 TX-R1635.
2 C ONTENTS Chapter 1: Y our New TV . . . . . . . . . . . . . . . . . 4 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 C ONTENTS Chapter 4: Special Features . . . . . . . . . . . . . 30 Fine T uning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Selecting the Color T one . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 List of Features Y our TV was designed with the latest technology . This TV is a high-performance unit that includes the following special features: • Easy-to-use remote contr ol • Easy-to-use o.
5 Familiarizing Y ourself with The TV Front Panel Buttons The buttons on the front panel contr ol your TV’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the remote contr ol. Y OUR N EW TV ˛ MENU Press to see an on-screen menu of your TV's fea- tures.
6 Y OUR N EW TV Side Panel Jacks Y ou can use the Side panel jacks to connect an A/V component that is used only occa- sionally , such as a camcorder or video game. (For information on connecting equipment, see page 16.) ˛ AUDIO INPUTS Audio signals from VCRs, DVD players and similar devices.
7 Y OUR N EW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously , such as a VCR or a DVD player . Because there are two sets of input jacks, you can connect two dif ferent A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.
8 Y OUR N EW TV Remote Control Y ou can use the remote contr ol up to about 23 feet from the TV . When using the remote, always point it directly at the TV . ˛ POWER T urns the TV on and off. « Number buttons Press to select channels directly on the TV .
9 Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat T win Leads” below . If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page.
10 I NST ALLA TION Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box ▼ 1 Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV . Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels.
11 I NST ALLA TION Connecting to a Cable Box that Descrambles All Channels ▼ 1 Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply , “OUT”. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV .
12 I NST ALLA TION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
13 I NST ALLA TION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet connected to an antenna or a cable system.
14 I NST ALLA TION 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO IN jack on the TV . An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics stor e.) Note: This figur e shows the Standar d connector -jack panel.
15 I NST ALLA TION Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV . Note: Only 480i formats ar e supported. Note: For an explanation of Component video, see your DVD player's owner's manual.
16 I NST ALLA TION 2 Connect an audio cable between the AUDIO OUT- PUT jack on the cam- corder and the AUDIO terminals on the side of the TV . 3 Connect a video cable between the VIDEO OUT- PUT jack on the cam- corder and the VIDEO ter- minal on the side of the TV .
17 I NST ALLA TION ▼ 3 Replace the cover . Remove the batteries and store them in a cool, dry place if you won’ t be using the remote contr ol for a long time. The remote contr ol can be used up to about 23 feet from the TV . (Assuming typical TV usage, the bat- teries last for about one year .
18 O PERA TION Chapter Three O PERA TION T urning the TV On and Off Press the POWER button on the remote control. Y ou can also use the POWER button on the fr ont panel. Viewing the Menus and On-Screen Displays Viewing the Menus Viewing the Display ▼ The on-screen displays disappear after about ten seconds.
19 O PERA TION Selecting a Menu Language 2 Press the ˇ or ˆ button to select the appropriate language: English, Spanish or French. Press the EXIT button to exit. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Function”, then press the ˇ or ˆ button.
20 O PERA TION Memorizing the Channels Y our TV can memorize and store all of the available channels for both “of f-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels.
21 O PERA TION 3 Press the ˇ or ˆ button. The TV will begin memorizing all of the available channels. Storing Channels in Memory (Automatic Method) ▼ The TV automatically cycles through all of the available channels and stores them in memory . This takes about one to two minutes.
22 O PERA TION Adding and Erasing Channels (Manual Method) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ˇ or ˆ button. 2 Press the ▲ or ▼ button to select “Add/Erase”, then press the ˇ or ˆ button.
23 O PERA TION Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press CH or CH , the TV changes channels in sequence. Y ou will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.
24 O PERA TION 1 Press the MENU button to display menu. Press the ˇ or ˆ button to select “Picture”. Customizing the Picture Y ou can use the on-screen menus to change the contrast, brightness, sharpness, color , and tint according to personal pr eference.
25 O PERA TION Using Automatic Picture Settings Y our TV has three automatic picture settings (“Dynamic”, “Standar d” and “Movie”) that are preset at the factory . Y ou can activate either Dynamic, Standard or Movie by making a selection from the menu.
26 Adjusting the V olume Press the VOL + or VOL– button to increase or decrease the volume. Using Mute At any time, you can temporarily cut off the sound using the Mute button. 1 Press the MUTE button and the sound cuts off. The word “Mute” will appear in the lower -left corner of the screen.
27 O PERA TION 4 Press the ▲ or ▼ button to select a particular item to be changed. Press the ˇ or ˆ button to increase or decrease the value of a particular item.
28 O PERA TION Setting the Clock 1 Press the MENU button to display the on-screen menu. Press the ▲ or ▼ button to select “Function”, then press the ˇ or ˆ button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ˇ or ˆ button.
29 O PERA TION Viewing a VCR or Camcorder T ape Y ou must select the appropriate mode in or der to view the VCR or Camcorder signal on the TV . 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ˇ or ˆ button.
30 Chapter Four S PECIAL F EA TURES Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 2 Press the ▲ or ▼ button to select “Fine tune”, then press the ˇ or ˆ button. 4 T o store the fine tuning setting in the TV’ s memo- ry , press the ▲ or ▼ but- ton to select “Select”.
31 S PECIAL F EA TURES Selecting the Color T one 2 Press the ▲ or ▼ button to select "Color T one". 3 Press the ˇ or ˆ button repeatedly to select “Cool”, “Normal” or “ War m ”. Press the EXIT button to exit. 1 Press the MENU button to display menu.
32 S PECIAL F EA TURES Changing the Screen Size 3 Press the ˇ or ˆ button repeatedly to select “Normal” or “Zoom”. Press the EXIT button to exit. • Normal : Sets the picture to 4:3 normal mode. This is a standar d TV screen size. • Zoom : Magnifies the size of the picture on scr een.
33 S PECIAL F EA TURES Using the Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. Y ou can set the Surf to “5 minutes”, then switch channels.
34 S PECIAL F EA TURES Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being br oadcast, you can listen to stereo, mono or a Separate Audio Program. (SAP audio is usually a for eign-language translation. Sometimes SAP has unrelated information like news or weather .
35 S PECIAL F EA TURES Extra Sound Settings • Auto V olume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
36 S PECIAL F EA TURES Setting the On/Off T imer 3 Press the ▲ or ▼ button to select "On time". Press the ˇ or ˆ button to select the “On time” hours. (The hours digits will be highlighted.) Press the ▲ or ▼ button repeatedly to select the appropriate hours (i.
37 S PECIAL F EA TURES 5 Press the ˆ button to select “On/Off”. Press the ▲ or ▼ button to turn the On time “On”. (Repeatedly pressing the ▲ or ▼ button will alternate between on and off.) 6 When finished, press the ˆ button . ▼ T o deactivate the “On time”, select “Off” during this step.
38 S PECIAL F EA TURES ▼ Misspellings and unusual characters sometimes occur during closed caption transmissions, especial- ly those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV .
39 S PECIAL F EA TURES Using the V -Chip The V -Chip feature automatically locks out programming that is deemed inappr opriate for children. The user must first enter a PIN (personal ID number) before any of the V -Chip restrictions can be set up or changed.
40 S PECIAL F EA TURES How to Set up Restrictions Using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V -chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guide- lines or the MP AA rating.
41 S PECIAL F EA TURES 2 Press the ▲ or ▼ button to select the “V-chip”, then press the ˇ or ˆ button. The “Enter Pin” screen will appear . Enter your 4- digit PIN number . 3 The “V-chip” screen will appear . Press the ▲ or ▼ button, and highlight the field for “TV guidelines”.
42 S PECIAL F EA TURES How to Set up Restrictions Using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies. (Eventually , movie videocassettes will be encoded with MP AA ratings.
43 S PECIAL F EA TURES How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go black and the following message will appear: “Excessive rating”.
44 If the TV seems to have a problem, first try this list of possible pr oblems and solutions. If none of these troubleshooting tips apply , then call your nearest service center . Identifying Problems Chapter Five T ROUBLESHOOTING Problem Possible Solution Poor picture T r y another channel.
45 Cleaning and Maintaining Y our TV W ith proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Placement • Do not place the TV near extremely hot, cold, humid or dusty places.
M EMO.
M EMO.
Printed in Mexico AA68-03591A-01 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsung.com Samsung Electronics Canada Inc. Samsung Customer Car e 55 Standish Court Mississauga, Ontario L5R 4B2 www .
デバイスSamsung TX-R2028, TX-R2035, TX-R1635の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung TX-R2028, TX-R2035, TX-R1635をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung TX-R2028, TX-R2035, TX-R1635の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung TX-R2028, TX-R2035, TX-R1635の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung TX-R2028, TX-R2035, TX-R1635で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung TX-R2028, TX-R2035, TX-R1635を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung TX-R2028, TX-R2035, TX-R1635の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung TX-R2028, TX-R2035, TX-R1635に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung TX-R2028, TX-R2035, TX-R1635デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
