SanyoメーカーCE28DFN2-Bの使用説明書/サービス説明書
ページ先へ移動 of 20
CE 28DFN2-B CE 32DFN2-B Please read this Instruction book before using your television. W e wish you many hours of pleasure from your new television. Colour T elevision INSTRUCTION MANUAL.
2 END-USER LICENCE & SAFETY END-USER LICENCE & SAFETY PRECAUTIONS PRECAUTIONS Do not allow anything to rest on the power cord. Do not locate this television receiver where the cord will be damaged by people walk- ing on it. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3 Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown below or as shown opposite when A V equipment is con- nected. Connect the power cord of the TV set to a wall outlet. ✐ The TV set is prepared for a mains voltage AC220~240V , 50Hz.
4 Press the Mains on off switch on the front of the TV set. The self-automatic tuning system called Plug and Play will start. The TV scans the analogue channels first and then switches to digital channel mode and scans digital channels. This could take up to 15 minutes.
5 Screen mode selector T o select the screen mode, A UTO , NA TURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL. TV/A V switch T o switch from Digital TV , A V1, A V2 or A V3 mode press repeatedly .
6 The main menu screen takes you to many functions in the TV . The buttons below are the main buttons and their uses. MENU button - Enters and exits menus. Cursors e e and d d moves up and down in each selected menu. Cursor 7 7 changes levels, moves to the left and returns to previous menu.
7 ■ Remove a channel. 1. Highlight a channel to be removed. 2. Press Red button and it will be deleted, the screen shows a red line through it. T o deselect a deleted channel press Red button again. ✐ Red button refers to coloured buttons Red, Green, Y ellow and Blue.
8 ● How to watch a locked channel. 1. Select a locked channel, Parental lock display appears. 2. Press OK button, enter the Parental code and press OK again. 3. The channel is temporarily unlocked until the channel is changed. 4. Press MENU button to return to normal TV picture.
9 ● Edit channel list 1. Press Menu button to select Main Menu . 2. Select Channel List by using e e or d d buttons. Press 8 8 to enter . 3. Select Lock channels by using e e or d d buttons. Press 8 8 to enter . 4. T o delete channels from this list use e e or d d buttons to highlight a channel.
10 - This feature is used when you wish to record a digital channel on your VCR. - In order to record digital channels you cannot watch another digital channel when recording. Digital channels are recorded using A V2. - T imer recording will switch your TV set to the digital channel at the preset time until the finish time is reached.
11 ■ Child lock Y ou can prevent small children from operating the TV with the front buttons of the TV set. Press the MENU button to select main menu. Press e e or d d buttons to select TV settings. Press 8 8 to enter menu. Press e e or d d buttons to select.
12 REMOTE CONTROL REMOTE CONTROL - - Analogue Analogue Screen mode selector T o select the screen mode, AUT O, NA TURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL. TV/A V switch T o switch from TV , A V1, A V2 or A V3 mode press repeatedly.
13 Many of your TV’ s functions are controlled through the menu function. During the menu operation the following buttons are used. u : T o enter the menu function. : T o go back and to exit the menu function. : T o navigate up and down in the menus.
14 The preset menu can be used to tune new channels, to reorder channels and their programme positions, and to make fine adjust- ments to the tuning. There are two ways to tune in new channels. Auto : Searches for all channels and stores them automatically .
15 T eletext - This is a free service to give you lots of varied informa- tion such as news, sports results, weather and travel features. T eletext reception If your aerial signal is poor , the teletext reception operation may be erratic. T eletext brightness level Y ou can change the teletext brightness level.
16 ■ Switching into /from standby mode The Standby mode is used for switching the TV set of f for short periods of time. In standby mode the TV is switched of f but is still receiving mains power . ● T o turn the TV set into standby mode, press the 4 4 button .
17 ■ Screen options T oday there are various transmission formats with different size ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox. ■ AUTO It automatically switches to the optimum screen mode according to the WSS signal provided in the receiving signal source.
18 Common specification Power source AC 220~240V 50Hz T elevision system System I Colour system P AL/NTSC4.43 (P AL/NTSC4.43/NTSC3.58 in A V mode) Channel coverage UHF: 21-69.
19 Sanyo U.K. Sales Ltd. (the company) warrants to the initial retail purchaser that if this equipment is or becomes defective and that, in the opinion of the Company , the defect is due to faulty mat.
Part No. 1KA6P1P0046-C C6AD/BD Printed in U.K..
デバイスSanyo CE28DFN2-Bの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sanyo CE28DFN2-Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo CE28DFN2-Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo CE28DFN2-Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo CE28DFN2-Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo CE28DFN2-Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo CE28DFN2-Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo CE28DFN2-Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo CE28DFN2-Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。