SanyoメーカーLCD-19XR9DAの使用説明書/サービス説明書
ページ先へ移動 of 40
INSTRUCTION MANUAL LCD-19XR9DA LCD TV Before connecting, operating or adjusting this product, please read the manual completely . Please keep this manual for future reference.
IMPORT ANT INFORMA TION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ! Using cabinets or stands recommended by the manufacturer of the television.
T able of Contents Important Safety Precautions..........................................................................................................................1 Important Notice ...............................................................
1 Important Safety P recautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety .
Important Safety P recautions (Continued) 2 15. Stand ---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus.
Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
< Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control < Do not expose the remote control to shock.
5 75-ohm coaxial cable (round cable) INST ALL the unit in a room where dire ct light will not fall upon the screen . T otal darkne ss or a refl ecti on on the pictur e scre en may caus e eyes train. Soft and indi rect ligh ting is reco mmende d for comfor table view ing.
6 Main Unit Identification of Controls P ower Indicator Remote Sensor Functions of CH+/- , V OL+/- , MENU , SOURCE and are also provided to the remote control. This operation manual provides a description based on operating functions with the remote control.
7 Main Unit Identification of Controls (Continued) 1 2 4 5 7 8 6 3 1. HDMI interface 2. D -SUB input Connect to the D -SUB/AUDIO output jack on your computer . 3. S/PDIF digital audio out terminal (coaxial) Connect to the digital audio input of a digital audio component.
Remote Control Unit Identification of Controls (Continued) POWER: Switches the TV power on or Standby . TV/Radio: Switches between TV and Radio mode. (DTV only) EPG: Displays the Electronic Program Guide (DTV only). FA V .LIST : Displays the favorite channel list.
Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Connecting Component Video Connections (Continued) 10 T o connect a device using component video: 1. T urn on your TV , then press SOURCE button. The Input Source menu opens. 2. Press 5 or 6 to select Component , then press OK to confirm. 3. T urn on your external device and set it to the correct mode.
Connections (Continued) 11 Connecting an HDMI device Cables are often color-coded to connectors. Connect red to red, white to white, etc. Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device. T o play from the device using HDMI: How to connect a device using HDMI Connection: 1.
1 3 With the power on, press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 or 4 navigate through the options or adjust an option. Press OK to confirm a selection or enter a sub-menu. Press 3 or 4 to select menu. Press 6 to access the menu .
Basic Operations (Continued) 13 With the power on, press the P ower button on the unit or on the remote control to turn off the unit, and put the unit in standby mode. T o cut off the power completely , press the P ower Switch directly . T urning On Insert the power cord into the wall outlet.
Displaying the Information Banner Press the INFO button to display the information banner . The information banner displays current status information such as the channel number and signal source. Depending on the mode, different information is displayed.
Memorizing the Channels When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV . Note : Be sure to select the proper input source (A TV/DTV) before operation . 1 Highlight VHF CH (or UHF CH ) item, press 3 or 4 button to select your desired channel number .
1 Highlight Storage T o item, press 3 or 4 button to select a channel position in which you want to store. In Channel menu, press 6 or 5 to select A TV Manual T uning item, then press 4 or OK to access. 2 If desired analog programs cannot be searched by Auto T uning, you can make use of A TV Manual T uning to search programs manually .
Memorizing the Channels (Continued) Labeling Channels If required, you can give a name to the programs. 4 Within the program list, press 6 or 5 to select a channel you want to edit, press GREEN button to start to label. Then a name symbol appears alongside.
Memorizing the Channels (Continued) 18 1 Select the channel you want to delete in the Programme Edit menu. Press RED button and a delete symbol appears alongside the selected channel in the list. Press RED button again to finish the delete. T o delete channels This function allows you to delete your unwanted channels.
Channel and P rogram Selection = RECALL will not work if no channel has been changed after TV is turned on. Note Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channels.
Picture Adjustment 20 Customizing the Picture 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 or 6 to scroll through the page upward or downward, and press 5 , 6 , 3 , 4 to navigate through the options or adjust an option. Press 3 or 4 to select Picture menu, press 6 to access the menu .
Sound Adjustment 21 Press the VOL + or VOL- to increase or decrease the volume. Press the MUTE button to temporarily turn off all sound. T o restore the sound, press the MUTE button again. Adjusting the Sound 1 3 Press MENU and the main menu screen displays.
Sound Adjustment (Continued) Stereo/Bilingual Selection (for analog channels) Y ou can quickly select sound multiplex mode by using the STEREO button on the remote control. This enables the selection of the reception mode when receiving a NICAM signal.
System Setup System Setup 1 3 Press MENU and the main menu screen displays. Within the menu, press 5 , 6 , 3 , 4 to navigate through the options or adjust an option. Press 3 or 4 to select Option menu, press 6 to access the menu . 2 Y ou ma y change syst em sett ings such as Hear ing impa ired , SPDI F , Audi o Prefe rence, etc .
Block Program Setup 1 3 2 The Block Program function blocks any channels that you do not want to watch or that you do not want your children to watch. Navigate to the Lock menu and input the correct password to access. Use 5 or 6 to highlight Block Program item, press 4 or OK to access.
R ating and Lock Setup (Continued) Lock T uning Setup Making use of Lock T uning you can protect some TV settings from being accidentally changed. 1 Navigate to the Lock menu and input the correct password to access. No w th e L oc k T u nin g it em w il l be hig hli ght ed a ut oma tic all y .
Timer Setup 26 Time Zone Selection 1 3 Press MENU and the main menu screen displays. Press 5 or 6 to select Time Zone item, and then press 3 or 4 to select the appropriate one.
Off Timer Setup 1 3 Na vig ate to th e T im e me nu , pr ess 6 t o ac ces s . Now the Activate item will be highlighted automatically , press 3 or 4 to select On . (If you want to cancel setting, please choose Off ) Press 5 or 6 to select Off Time item, press 4 or OK to access the submenu.
28 EPG Operation EPG The Electronic Programme Guide (EPG) makes it possible for users to see details about the programme they are watching, other programmes and even a schedule of the next 7 days. The information available includes the number and name of the channel, the name and type of programme, the start and end time, and a summary .
T elete xt T elete xt & Subtitle Select a TV channel providing the T eletext program. Press TTX button to display the teletext. Press TTX button again to switch back to TV screen. Y our System receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
Screen Setup for D -SUB(PC) Mode Before adjusting the screen, make sure that you select the correct source (D -SUB). 30 Option Description Auto adjust Horizontal P osition Size Phase Selects and activates to start auto adjustment. The set automatically adjusts the image settings, such as position and phase.
Hotel Mode Setup 31 Channel Preset Lock Off V olume Max A V Lock Press < OK > to save Panel Lock Hotel Mode 100 Off Off 1 3 Press SOURCE button. The Input Source menu opens. Within the menu, press 5 , 6 , 3 , 4 to navigate through the options or adjust an option.
Remote Control If , after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions.
33 T roubleshooting General Problem P ossible Solutions One or some channels can ’t be displayed ! These channels may be locked. Please unlock them (see <Rating and Lock Setup> section). ! These channels may be set skipped in the channel list.
T ype: LCD TV Display Size diagonal: 48cm (19 inch) P ower Supply: AC220-240V 50/60Hz P ower Consumption: 30W Dimensions(mm): 458 (W) x 336 (H) x 180(D) Unit W eight(kg): 4 Specifications ! Design and specifications are subject to change without notice.
Assembling the stand and removing the stand column(Option) 35 P u s h d o w n w a r d s S t a n d S t a n d g r o o v e S t a n d c o l u m n S afe ty Preca ut ion s: 1.P le ase re ad t hes e i nst ruc ti ons th oro ug hly pr ior to att em pti ng t hi s in st all ati on .
36 Detaching the Stand 2.P re ss th e t wo ta bs to ge th er an d p ush i nsi de p rop er ly , an d p ul l o ut th e s ta nd at th e s am e t im e t o det ac h th e sta nd . NOT E: 1.A pp ea ran ce of t his pro du ct i n il lu str at io ns m ay d if fer fro m y our act ua l pr od uct , an d i s fo r com pa ra tiv e pu rp ose s on ly .
5944035480 V er . 1.0.
デバイスSanyo LCD-19XR9DAの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sanyo LCD-19XR9DAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo LCD-19XR9DAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo LCD-19XR9DAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo LCD-19XR9DAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo LCD-19XR9DAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo LCD-19XR9DAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo LCD-19XR9DAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo LCD-19XR9DAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
