SanyoメーカーLCD-26XR7の使用説明書/サービス説明書
ページ先へ移動 of 34
Before connecting, operating or adjusting this product, please read the manual completely . Please keep this manual for future reference. INSTRUCTION MANUAL LCD-26XR7 LCD TV Downloaded From TV-Manual.
IMPORTANT WARNINGS ♦ You MUST leave a space of at least 10 cm at the top, bottom, left, right and rear of this TV for ventilation. ♦ No naked flame sources, such as light ed candles, should be placed on or above this TV .
T able of Contents Important Safety Precautions .............................................................................................................................................1 Preparations ...............................................
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety .
Important Safety Precautions (continued) 12. Stand ---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus.
< An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can collide with such power lines or circuits.
Preparations 4 Power Connection Note: < This product should be operated only from the type of power source indicated on the marking label. < Always unplug the AC cord from power outlet when not using for a long period of time. Insert the AC plug into a conveniently located AC outlet.
Speaker connection Note : 4 Unplug the LCD display and all connected component before connecting the speakers. 4 The illustration may be different depending on model. Connect the speaker audio cable to the external speaker output jack on the unit matching the "+" and "-" ends of the cable with color .
Identification of Controls 6 Main Unit Note: Functions of VOL+/- , CH+/- , MENU , SOURCE and POWER are also provided to the remote control. This operation manual provides a description based on operating functions with the remote control. OSD means On Screen Display .
Identification of Controls (continued) Main Unit 7 SCART1 INTERFACE HEADPHONE JACK ANTENNA INPUT RS232 interface Pr Pb Y D-Sub AUDIO HDMI/DVI IN AU D I O R AUDIO L D-Sub IN COMPONENT IN SCART2 INTERFACE S-VIDEO VIDEO AUDIO L/MONO AUDIO R AV IN P UT / S- V I DE O I N 1.
Remote Control 1. POWER T urn the unit on or off 2 . T eletext T o enter or exit teletext mode (T eletext) 3 . Hold T o hold the current teletext page temporarily (T eletext) 4 . Reveal T o display hidden information such as solution to riddles and puzzles(T eletext) 5 .
Connections Cautions before connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be dif ferent depending on your model. Loose connectors can result in image or colour problems.
10 Note: < The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface. < When receiving Y/C signal, you need to select SCART 2 YC instead of SCART 2 A V in the source select menu. Therefore, if you find that the colour is not properly displayed, please try to select SCART 2 YC .
Connections (continued) Connect A V or S-V ideo inputs 1 1 VCR Video Camera Examples of external devices that can be connected Home video game system Note: For better video, you can use the S-V ideo terminal if your source supports it. The S-V ideo is prior to Video terminal when they are connected at the same time.
Connect a DVD player Connections (continued) 12 Connect the Video cable between the Y , Pb, Pr input jacks on the unit and Y , Pb, Pr output jacks on the DVD player . Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.
Connections (continued) 13 Device with HDMI jack H D M I O U T P U T Audio cable D-Sub cable PC Connect a HDMI device Connect a PC 1. T urn on your LCD TV , press SOURCE button on the remote control. 2 . Use 5 or 6 repeatedly to select VGA and press or to confirm.
T urning the Unit On and Off T urning On T urning Off With the power on, press the Power button on the remote control to turn off. If you would like to cut off the power completely , press the Power Switch directly . Note: Y ou can also use the Power button on the Control panel on the main unit.
： SEL ： ADJ ： EXIT OSD LANGUAGE OSD H-POSITION OSD HALFTONE OSD DURA TION MENU OSD V -POSITION 15 SEC 50 44 50 SYSTEM Selecting Input Source Signal Press the SOURCE button to display the SOURCE menu . 1 1 2 VGA ------Select signal from VGA (D-SUB) jack.
Memorizing the Channels Y our LCD TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan through the channels. 16 CHANNEL LABEL D/K Before you start AUTO SCAN , it is necessary to select a region firstly .
Memorizing the Channels (continued) 17 If you fine-tune a program manually , the AFC will be turned of f automatically . Manual Fine T uning Press or to select FINE TUNING item. 5 6 4 Press MENU to display the menu main page. 1 Press 3 or 4 repeatedly to select TV -CHANNEL menu, and press to access.
Memorizing the Channels (continued) 18 Setting Color/Sound System TV - CHANNEL ： SEL ： ADJ ： EXIT COLOR SYSTEM SOUND SYSTEM AUTO SCAN MANUAL SEARCH CHANNEL LABEL AUTO B/G MENU OTHER PROGRAM AREA Press to . 3 or 4 select a proper color system(normally please select AUTO) or sound system 4 Press MENU to display the menu main page.
Setting Picture Customizing the Picture Within the menu, use 5 , 6 , 3 or 4 to navigate or adjust. Press OK button to exit the menu or press MENU button to return to the previous menu.
Option Function Choice/Remarks 4 : Higher volume from right speaker . 3 Higher volume from left speaker . : Sound Mode Bass T reble Balance A VC ( Auto V olume Control ) Selects sound mode.
This enables the selection of the reception mode when receiving a NICAM signal. T o let you enjoy NICAM broadcasting, this TV set receives NICAM system stereo, bilingual, and monaural broadcasts. Stereo When the TV set is receiving a stereo broadcast, press the Stereo button to select NICAM STEREO or NICAM MONO .
ADV ANCE ： SEL ： ADJ ： EXIT CLOCK ON TIMER SLEEP TIMER TTX LANGUAGE P ARENT CONTROL OFF OFF TIMER BLUE SCREEN 1 4 : 5 6 WEST OFF - - : - - - - : - - Note: The above menu is shown as an example. The menu items may be different when the unit works in different mode.
Setting Advance (continued) 23 ADV ANCE ： SEL ： ADJ ： EXIT CLOCK ON TIMER SLEEP TIMER TTX LANGUAGE P ARENT CONTROL OFF MENU OFF TIMER BLUE SCREEN 0 4 : 5 6 WEST OFF - - : - - - - : - - ADV ANCE .
Parental Control The Parental Control function enables parents to prevent their children from watching inappropriate programs on TV . To use Parental Control function, you first need to set your password. Press MENU to display the menu main page. 1 Press repeatedly to select ADV ANCE menu, and press to access.
Adjusting On-Screen Display Press MENU to display the menu main page. 1 Press repeatedly to select menu 3 or 4 SYSTEM , and press 6 to access. 2 Press repeatedly to select H-POSITION or V -POSITION item. 5 or 6 OSD OSD 3 Adjusting OSD Position Press 3 or 4 to adjust the OSD position.
Adjustment in PC (VGA) Mode 26 Adjusting the Picture 1 2 Within the menu, use 5 , 6 , 3 or 4 to navigate or adjust. 3 Press OK button to exit the menu or press MENU button to return to the previous menu. Press MENU to display the menu PICTURE , and press 6 to access.
T eletext What Is T eletext? Y our System receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.
T roubleshooting If your problem is not solved, restart your TV by turning it of f and then on again once. Never attempt to repair a defective TV yourself. Note: Symptoms Check item = This may be caused by obstruction to the due to high rise buildings or hills.
Care and Maintenance LCD Display panel information The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by W arranty . This product is not designed to display fixed image patterns for extended periods of time.
30 Specifications Design and specifications are subject to change without notice. T ype: LCD TV Display Size diagonal: 26” Power Supply: AC 100-240V ,50/60Hz Power Consumption: 100W Dimensions(mm): .
SANYO Electric Co., Ltd. 5944029010 V er . 1.0 Downloaded From TV-Manual.com Manuals.
デバイスSanyo LCD-26XR7の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sanyo LCD-26XR7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo LCD-26XR7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo LCD-26XR7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo LCD-26XR7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo LCD-26XR7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo LCD-26XR7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo LCD-26XR7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo LCD-26XR7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
