SanyoメーカーPDG-DHT100Lの使用説明書/サービス説明書
ページ先へ移動 of 90
Multimedia Pr oject or MODEL PDG-DHT1 0 0L Owner ’ s Manual ✽ Projection lens is optional..
2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia f eatures. ◆ Functionally Ric h ◆ Simple Computer S ystem Set ting The projector has the Multi-scan system to conform to almost all computer output signals quic kly (p.
3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. DLP is a registered trademark of T exas Instr uments. BrilliantColor and DynamicBlac k are trademarks of T exas Instr uments.
4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLA CEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L TAGE C O N S T I T UT IN G A R I S K O F E L E C T R I C SHOCK IS PRESENT WITHIN THIS UNI T .
5 All the saf ety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners.
6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken.
7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down w ard, or inclined position in perpendicular direction to the horizontal plane.
8 Mo ving the Pr oject or CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuitable transport case.
9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug. Should the fuse need to be replaced, an A S T A appro ved BS 1362 fuse must be used of the same rating , marked thus AS A .
1 0 u e r t F r ont o q w y i Bac k q Pr ojection Lens (Option) w Indicat ors e Infrar ed Remote Receiv er (F r ont) r Handle t Adjustable Feet y Side Control u T er minals and Connectors i Main On/Off Switc h o Po w er Cord Connect or !0 Lamp Cover !2 CA UTION Hot air is exhausted from the e xhaust vent.
1 1 T er minals and Connect ors !0 R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). q USB CONNECT OR (Ser ies B) USB connector is used to service the projector .
12 r FOCUS butt on A djust the f ocus. (p.28) e ZOOM butt on Zoom in and out the images. (p.28) q ON/S T AND-B Y butt on T urn the projector on or of f . (pp.24,25) !0 INPUT butt on Select an input source INPU T 1, INPU T 2, Input 3 or Input 4.
13 Indicat ors q w e r t y u e W ARNING TEMP . indicat or This indicator flashes red when internal projector temperat ure is too high. (pp.70, 77 -79) u LAMP 2 REPLACE indicat or T urn orange when the lif e of the projection lamp2 draws to an end.
Remot e Contr ol P art Names and F unctions q t e !0 i !4 r !3 !1 w y o !7 !2 !8 !9 @0 e LIGHT butt on Light the but tons on the remote control f or about 1 0 seconds. r MENU but ton Open or close the On-Screen MENU. (pp.26-27) t POINT ed 7 8 butt ons – Select an item or adjust the value in the ON-SCREEN MENU .
Remot e Contr ol Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size batt er ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment.
16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time.
1 7 Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, contact sales dealer where you purc hased the projector .
1 8 Projection lens can be mo v ed from side to side and up and do wn with the motor -driven lens shif t function. T his function makes the positioning of images easy on the screen. (See page 28) Lens Shif t Adjustment When the lens is shif ted t o top.
1 9 T er minals of Pr ojector The projector has two replaceable Interf ace board slots. The projector's functions can be e xtended b y installing the optional interface boards into the terminal slots. 1 v acant slot (Input 3) is pro vided in y our purc hasing the projector .
20 Installation Connecting t o Comput er V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or D VI Cable BNC Cable Monitor Output U n p lu g t h e p o we r co r d s of b o t h t h e projector and e xternal equipment from the A C outlet before connecting cables.
21 Installation Connecting t o Video Equipment Video Source (e xample) Video Casset te Recorder D VD Pla yer RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment.
22 Installation At tac hing the Cable Co v er Fix the opposite end of the strap to the hole inside the support cov er with a scre w (supplied). 1 3 Insert the support cov er into the co v er insertion slot and slide it to the lef t. 4 Tie a strap (supplied) to the low er brac ket on the right side of the projector ’ s terminal area.
23 NOTE ON THE POWER COR D A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug t ype with the c hart belo w and proper A C power cord must be used. If the supplied A C power cord does not matc h your A C outlet, cont act your sales dealer .
24 T ur ning On the Pr ojector Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control.
25 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P o wer of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . T he LAMP indicator lights bright and the PO WER indicator turns of f .
26 Side Contr ol SELECT butt on Ho w t o Oper at e the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual.
27 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p.35). Used to select an image lev el among Standard, Real, Dynamic, and Image 1–1 0 (p.39). Used to adjust the size of the image.
28 Oper ating with Pr oject or Contr ol Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo v ed up or do wn to 67 .7 percent, or sidew a y s up to 41 .
29 Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to display the information windo w on the screen.
30 Oper ating with Remot e Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen.
31 KEY ST ONE butt on Reduce the upper width with P oint e button. Reduce the lo wer width with P oint d button. Reduce the lef t part with P oint 7 button. Reduce the right part with P oint 8 button. • The white arro ws indicate that there is no correction.
32 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but ton on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation Side Contr ol INPUT butt on Press the INPU T but ton on the side control.
33 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton.
34 When the video input signal is connected to the S-VIDEO jac k, select S-video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video.
35 Comput er S yst em Selection This projector automatically t unes to various types of computers based on V G A, S V GA, XG A, SXGA, SXG A+, WXGA, UXG A, or WUXGA (ref er to “Compatible Computer Specifications” on pages 80-81).
36 A uto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon.
37 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned b y Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal formats.
38 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted data, select Reset and press the SELECT but ton.
39 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
40 ✔ Note: • T rue, F ull, and Digit al zoom +/– cannot be selected when no signal is detected in the PC Sy stem Menu. (p.35) • The projector cannot displa y the resolution higher than 1 920 x 1 080. If your computer ’ s screen resolution is higher than 1 60 0 x 1 200, low er the resolution before connecting the projector .
41 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size.
42 A V S Y STEM MENU (VIDEO OR S-VIDEO) A V S Y STEM MENU (COMPONENT VIDEO) V ideo S yst em Selection Press the MENU but ton to display the On-Screen Menu.
43 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
44 Scr een Siz e Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton.
45 Ke ystone This function is used to store or reset the k e ystone cor rection when the Main On/Of f S witc h is pressed to Of f or the A C pow er cord is unplugged.
46 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x.
47 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Off . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position.
48 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31).
49 Pictur e Image Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Sw edish, R ussian, Chinese, Korean, or J apanese.
50 Back ground The selected bac kground screen will be displa yed when no input signal is detected. Blue . . . Blue colored bac k ground. User . . . The image y ou captured. Blac k . . . Blac k colored bac kground. Set ting Lamp control This function allo ws y ou to c hange brightness of the screen.
51 Set ting Pictur e in Pict ur e This function is used to project two videos simultaneously by placing a separate small sub screen within the main screen. Use the P oint ed but tons to mov e the red frame pointer to Picture in Pict ure and then press the SELECT button to display a dialog bo x.
52 Set ting Edge blending This function allo ws multiple projector images to be seamlessly ov erlapped. Use the P oint ed but tons to mov e the red frame pointer to Edge blending and then press the SELECT but ton to display a dialog box. Use the P oint ed7 8 but tons to adjust the setting value.
53 Set ting Advanced color matc hing . . . . . Set to ‘On‘ to activate the ‘ Adv anced color matc hing’ . When it is set to ‘Of f‘ , all items ex cept f or ’T est pat tern ’ are displa yed in gray out and cannot be adjusted. Measured .
54 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Bef ore capturing an image, select “Standard” in the Image Select Menu to capture a proper image. (pp.39, 43) • A signal from a computer can be captured up to 1 920 x 1 080 dots.
55 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Off .
56 Choose the running speed of cooling f ans from the f ollowing options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an contr ol Set ting Filter contr ol Y ou can replace the filter with this function. Press the SELECT but ton at Filter control to display a confirmation box.
57 P o wer manag ement Time lef t bef ore the lamp is of f Press the SELECT but ton at Po wer management and the dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options. Press the P oint d button to select the timer , and then use the Point 7 8 but tons to set the timer .
58 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons.
59 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P A GE 86, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED .
60 Set ting Shutt er Shut ter function is available to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control .
61 F act ory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu.
62 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and may result in internal heat buildup and adversely af f ect the lif e of the projector .
63 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Open the filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er .
64 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton.
65 Lamp Manag ement This P rojector is equipped with 2 P rojection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the st atus of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators.
66 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Co v er . Slide and open the Lamp Cov er until it mak es a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle.
67 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp lif etime may dif f er from lamp to lamp and according to the environment of use.
68 Maint enance and Car e Optional Color Wheel Installation The projector comes with the high brightness color wheels installed. A dditional ric h color reproduction color wheels are supplied. T o replace the color wheels, ref er to the f ollo wing steps.
69 T urn of f the projector , press the Main On/Of f Switc h to Off and unplug the A C pow er cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blo w er to clean the lens.
70 The W ARNING indicators sho w the state of the function whic h protects the projector . Chec k the state of the W ARNING TEMP . indicator and the LAMP indicator to t ak e proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP .
71 T roubleshooting Bef ore calling y our dealer or ser vice center for assistance, c hec k the items belo w once again. 1 . Make sure y ou ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection.
72 appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 66) appears on the scr een – The filter is out of scroll. R eplace the filter cartridge with a ne w one promptly . (See pages 62-63) The image is out of f ocus.
73 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at t empt to open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center .
7 4 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq.
75 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue F ull Digital zoom + Digital zoom - PC Adjust Auto PC adj.
7 6 Computer Input/V ideo Input Appendix Setting F an control All/F ront & T op/T op & Bac k/F ront & Bac k/ F ront/T op/Bac k Normal/Max P ow er management RC sensor Of f/Ready/Shut do wn 1–30 Min.
77 Indicat ors and Pr oject or Condition Chec k the indicators for the projector condition. The pr ojector is oper ating normally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx.
78 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red PO WER green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el.
79 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red PO WER green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig.
80 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. Appendix ✽ “T rue ” cannot be selected when WUXGA1, WXG A+2, UXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected.
81 Appendix ON-SCREEN DISPLA Y RESOLUTION H-Freq.(kHz) V -F r eq.(Hz) 1 080p 1 920x1 080 33.750 30.0 00 1 920x1 080 28.125 25.00 0 1 920x1 080 27 .00 0 24.0 00 1 920x1 080 67 .500 60.0 00 1 920x1 080 56.250 50.0 00 1 080psf/30 1 920x1 080 33.750 60.0 00 1 080psf/25 1 920x1 080 28.
82 Appendix On-Board Optional Interface B oard Input1 Input2 Dsub Dsub -DVI Component -S-video Component HDCP -DVI SDI HD wireless Analog PC Scart Digital Analog PC Component Video/ S-Video Analog PC .
83 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 5.75” x 9.55” x 20.61” (400.0 mm x 242.5 mm x 523.5 mm) Net Weight 43.65lbs (1 9.8 k g) F eet Adjustment 0˚ to 5˚ DLP Chip Projection S y stem 0.
84 Optional P arts Model No. Wired Remote Cable(30m) : PO A-CA-RC30 Optional Interface Board (DVI) : PO A-MD18D VI Optional Interface Board (5-BNC) : PO A-MD1 6VD1 Optional Interface Board (D-sub 15) .
85 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert.
86 W rite do wn the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , cont act the ser vice st ation.
87 Dimensions Unit: inc h (mm) Appendix 0.28(7.0) 9.21(234.0) 9.55(242.5) 4.45(113.0) 20.47(520.0) 20.61(523.5) 15.75(400.0) 8.31(211.0) 5.0º 5.0º 19.96(507.1) 96.0º 6.02(153.0) 5.63(143.0) 6.81(173.0) 6.81(173.0) 5.08(129.0) 4.65(118.0) 2.64(67.0) 4.
88 Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC.
89 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below .
KT5AL -A SANY O Electr ic Co ., Ltd..
デバイスSanyo PDG-DHT100Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sanyo PDG-DHT100Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo PDG-DHT100Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo PDG-DHT100Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo PDG-DHT100Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo PDG-DHT100Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo PDG-DHT100Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo PDG-DHT100Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo PDG-DHT100Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。