SanyoメーカーPLC-XP51Lの使用説明書/サービス説明書
ページ先へ移動 of 56
Owner’ s Man ual PLC-XP50/XP51 Multimedia Pr ojector MODEL PLC-XP50L/XP51L (Lensless).
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus .
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 15 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 ADJUSTABLE F.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM OF CABINET B ACK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent.
NO TE ON PO WER CORD AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 4.6 ’ (1.4m) ~ 47.3 ’ (14.4m). ● Refer to figure below to adjust screen size. Screen Size Distance 40 ” 31 ” 4.
10 PREP ARA TION ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.
11 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case.
12 CONNECTING PR OJECT OR S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG IN/OUT DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G .
13 CONNECTING PR OJECT OR S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG IN/OUT DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G .
14 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG IN/OUT DIGIT AL(DVI-D) INPU.
15 BEFORE OPERA TION FOCUS BUTTON Used to adjust focus. (P21) AUTO PC ADJ. BUTTON Use to operate AUTO PC Adjustment function. (P25) KEYSTONE BUTTON Used to correct keystone distortion. (P21, 37) IMAGE BUTTON Used to select image level. (P28, 32) LOCK FREEZE SELECT D .
16 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
17 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P18, 19) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level.
18 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 2 MOVING POINTER 3 SELECT ITEM Move pointer ( ✽ see below) or adjust value of item by pressing POINT button(s) on Top Control or on Remote Control Unit.
19 BEFORE OPERA TION MENU B AR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. FOR VIDEO SOURCE Press MENU BUTTON while connecting to VIDEO input source. PC SYSTEM MENU Used to select computer system. (Refer to P23, 24) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter.
20 B ASIC OPERA TION TURNING ON PR OJECT OR Connect a projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate.
21 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. Message “ Zoom ” is displayed.
22 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button.
23 COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERA TION Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
24 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATION ” on page 49). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting.
25 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear.
26 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector.
27 COMPUTER INPUT Selects area displayed with this projector. Select resolution at Display area dialog box. Display area Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button.
28 COMPUTER INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN button to move a red frame pointer to level that you want to set and then press SELECT button.
29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
30 VIDEO INPUT When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon.
31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear.
32 VIDEO INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN button to move a red frame pointer to level that you want to set and then press SELECT button.
33 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
34 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT UP/DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button.
35 PICTURE IMA GE Auto picture control Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2) Off ······· Auto picture control OFF position. L1 ········ Auto picture control LEVEL 1 position.
36 PICTURE IMA GE Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear.
37 Aspect V Aspect H Store ··· Store the adjustment data when disconnect AC Power Cord from an AC outlet. Reset ··· Reset the adjustment data when disconnect AC Power Cord from an AC outlet. Keystone SETTING MENU Press MENU button and ON-SCREEN MENU will appear.
38 SETTING Anamorphic Display This function decides whether to display On-Screen Displays. On ··· shows all the On-Screen Displays. Off ···· sets On-Screen Displays disappeared except; ● ON-S.
39 SETTING On start When this function is “ On, ” projector is automatically turned on just by connecting AC Power cord to a wall outlet. Note ; B e sure to turn projector off properly (refer to section “ TURNING OFF PROJECTOR ” on P20). If projector is turned off in wrong steps, On Start function does not operate properly.
40 SETTING USB Projector mode Select " " when controlling a projector with computer. NOTE: This is provided not for basic operation but for future use. This Projector is equipped with USB port for interactive operation between a projector and computer.
41 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION Wireless Remote Control Unit is not only able to operate this projector but also function as a wireless mouse for most Personal Computers. POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation.
42 APPENDIX MAINTENANCE W ARNING TEMP . INDICA T OR Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are not obstructed. Air Filter may be clogged with dust particles. Clean Air Filter by following section AIR FILTER CARE AND CLEANING on next page.
43 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When a projector is not in use, replace Lens Cover.
44 APPENDIX Turn off a projector and disconnect AC plug. Allow a projector to cool for at least 45 minutes. Loosen 2 screws with a screwdriver and pull out Lamp Assembly by grasping Handle. 1 3 Replace Lamp Assembly with a new one and tighten 2 screws back.
45 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
46 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 14.
47 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Check ALL-OFF switch on Remote Control Unit is set to “ ON ” . ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from a projector when using Remote Control Unit.
48 APPENDIX INDICA T ORS AND PR OJECT OR CONDITION Check the Indicators for projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
49 APPENDIX 1080i (HDTV) XGA 9 COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq.
50 APPENDIX RGB RGB( Scart) SYSTEM Input 2 Video Y, Pb/Cb, Pr/Cr SYSTEM 1) 3) Input 1 RGB(PC Digital) RGB( AV HDCP ) SYSTEM 1) SYSTEM 2) Monitor out RGB Input Video source Normal Image Screen 4) System 3) System System VGA 1 SVGA 1 Mode 1 Mode 2 XGA 1 Auto PC Adj.
51 APPENDIX Image adjust Contrast Brightness Color Red Green Blue Sharpness Store Quit 0 - 63 0 - 63 0 - 63 0 - 63 0 - 63 0 - 63 0 - 31 Image 1 Image 2 Image 3 Image 4 Quit Tint 0 - 63 Gamma Noise reduction 0 - 15 On/Off Reset Yes/No Color management 0 - 63 Auto picture control Off/L1/L2 Progressive Off/L1/L2 Sound Mute Quit Volume Built-in SP.
Owner ’ s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable USB Cable Control Cable for Serial port Protective Dust Cover Lens Cover (PLC-XP50/XP51) Lens Attachment (PLC-XP50L/XP51L) 52 APPENDIX Multi-media Projector Accessories ● Specifications are subject to change without notice.
53 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
54 APPENDIX OPTIONAL P AR TS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● Control Cable (PS2 Port) Type No. : POA-MCPS2 ● Control Cable (ADB Port) Type No. : POA-MCMAC ● MAC Adapter Type No.
55 APPENDIX.
Printed in Japan Part No. 610 315 6910 (1AA6P1P3972A- MH5A) SANY O Electric Co., Ltd.
デバイスSanyo PLC-XP51Lの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sanyo PLC-XP51Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo PLC-XP51Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo PLC-XP51Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo PLC-XP51Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo PLC-XP51Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo PLC-XP51Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo PLC-XP51Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo PLC-XP51Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
