SanyoメーカーPLV-60の使用説明書/サービス説明書
ページ先へ移動 of 44
Owner's Man ual PL V -60 Multimedia Pr ojector MODEL.
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES Federal Comm unication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER MODE 23 VIDEO MODE 31 SETTING 36 APPENDIX 38 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTIN.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, the following precautions should be taken. ● Do not put any flammable object near these vents.
SETTING-UP PR OJECT OR 8 PREP ARA TION This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor.
9 PREP ARA TION POSITIONING THE PR OJECT OR This projector is designed to project on a flat projection surface and it can be focused from 4.43 ’ (1.35m) ~ 45.9 ’ (14.0m). Refer to the figure below to adjust the screen size. Width x Height 886 x 498 mm 40 ” 100 ” 200 ” 300 ” 400 ” 308 ” 231 ” 154 ” 77 ” 31 ” 45.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump projector, otherwise damages or malfunctions may result. ● When carrying projector, use a suitable carrying case. ● Do not transport projector by using a courier or transport service in an unsuitable transport case.
INPUT 1 RGB SERIAL PORT R/C JA CK R - A UDIO - L(MONO) R - A UDIO - L(MONO) S-VIDEO V H/V R B INPUT 2 G VIDEO/Y INPUT 3 C/Pb (Cb) Pr (Cr) VIDEO/Y Pb (Cb) Pr (Cr) R - A UDIO - L (MONO) R - A UDIO - L RESET E X T .SP(8 Ω ) A UDIO OUT 11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR Connect S-VIDEO output from video equipment to this jack.
12 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT R - AUDIO - L(MONO) S-VIDEO V H/V R B INPUT 2 G VIDEO/Y INPUT 3 C/Pb (Cb) Pr (Cr) VIDEO/Y Pb (Cb) Pr (Cr) R - AUDIO - L (MONO) R - AUDIO - L INPUT 1 RGB SERIAL PORT R/C JA CK R - AUDIO - L(MONO) RESET EXT .
13 CONNECTING PR OJECT OR INPUT 1 RGB R - AUDIO - L(MONO) R - AUDIO - L(MONO) V H/V R B INPUT 2 G VIDEO/Y C/Pb (Cb) Pr (Cr) R - AUDIO - L EXT .SP(8 Ω ) AUDIO OUT SERIAL PORT R/C JA CK S-VIDEO INPUT .
14 LAMP REPLA CE W ARNING TEMP . LAMP READ Y ON-OFF BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS READY INDICATOR WARNING TEMP. INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR This indicator lights green when projector is ready to be turned on. And it flashes green in Power Management mode.
INPUT MENU SELECT NORMAL A UTO PC ADJ . LENS SHIFT V OLUME FOCUS ZOOM ON-OFF Used to adjust zoom. (P21) Used to select MENU operation. (P18, 19) MENU BUTTON INPUT BUTTON POWER ON – OFF BUTTON FOCUS BUTTONS VOLUME BUTTONS Used to select input source among INPUT 1, 2 or 3.
MUTE INPUT ON-OFF V OLUME ZOOM FOCUS A UTO PC ADJ . D.ZOOM FREEZE IMA GE NO SHO W LENS SHIFT KEYSTONE SELECT NORMAL MENU 16 16.4 ’ (5 m) 60 ° 16.4 ’ (5 m) BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL Used to select input source. (P23, 31) Used to execute the item selected or to expand image in Digital Zoom mode.
17 BEFORE OPERA TION OPEN OPEN 123 Slide the lid upward. Press the lid downward and slide it. Remove the battery compartment lid. Slide 2 batteries into the compartment.
18 LENS SHIFT KEYST ONE SELECT NORMAL MENU BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.
19 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select computer system. (Refer to P23, 24) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / White Balance (R/G/B) / Gamma] (Refer to P29) SETTING MENU Used to change settings of projector and reset Lamp Replace Counter.
20 B ASIC OPERA TION TURNING ON PR OJECT OR Connect the projector's AC Power Cord into an AC outlet and turn MAIN ON / OFF SWITCH to ON. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON.
21 KEYST ONE ADJUSTMENT 1 Press KEYSTONE button on Remote Control Unit or select Keystone on SETTING Menu (P36). The message “ Keystone ” is displayed. 2 Correct keystone distortion by pressing POINT UP/DOWN button(s). Press POINT UP button to reduce upper part of the image, and press POINT DOWN button to reduce lower part of the image.
22 MUTE SETTING V OLUME ADJUSTMENT B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. Press NO SHOW button on Remote Control Unit to black out the image.
23 COMPUTER MODE SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose either Input 1 or Input 2 by pressing INPUT button on Top Control or on Remote Control Unit. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon.
PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync., Total dots, and Picture Position to conform to your computer.
25 COMPUTER MODE MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector.
26 COMPUTER MODE NOTE : Display area (H/V), Horizontal scale and Vertical scale cannot be adjusted when “ HDTV1035i ” or “ HDTV1080i ” is selected on SYSTEM Menu (P23, 24). Fine sync and Total dots cannot be fully adjusted when “ HDTV1035i ” or “ HDTV1080i ” is selected on SYSTEM Menu (P23, 24).
27 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
28 COMPUTER MODE PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button.
29 COMPUTER MODE Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Stored Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon.
30 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
31 VIDEO MODE SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose either Input 2 or Input 3 by pressing INPUT button on the Top Control or on the Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below).
32 AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) VIDEO MODE SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear.
33 VIDEO MODE PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button.
34 VIDEO MODE Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button.
35 VIDEO MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
36 SETTING Ceiling When this function is “ On, ” picture is top / bottom and the left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed.
37 This function turns Projection Lamp off when projector detects signal interruption and projector is not used for a certain period in order to reduce power consumption and maintain the Lamp-life.
38 APPENDIX MAINTENANCE W ARNING TEMP . INDICA T OR WARNING TEMP. Indicator flashes red when internal temperature of projector exceeds normal temperature. The Indicator stops flashing when temperature of projector returns to normal. When WARNING TEMP.
39 APPENDIX LAMP REPLA CEMENT When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT Indicator lights yellow. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off projector and disconnect AC plug.
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 11 ~ 13.
41 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. APPENDIX W ARNING : High v oltages are used to operate this projector .
42 APPENDIX 1.35" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 20.3 lbs (9.2 kg) 12.44" x 6.46" x 18.9" (316mm x 164mm x 480mm) 1366 x 768 dots 3,147,264 (1366 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.
43 APPENDIX CONFIGURA TIONS OF TERMINALS RGB TERMINAL Terminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (not supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required.
Printed in Japan Part No. 610 289 4110 (1AA6P1P2612-- M4HA) SANY O Electric Co., Ltd.
デバイスSanyo PLV-60の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sanyo PLV-60をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo PLV-60の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo PLV-60の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo PLV-60で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo PLV-60を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo PLV-60の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo PLV-60に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo PLV-60デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
