AvenviewメーカーDVI-VIDEOWALL-4の使用説明書/サービス説明書
ページ先へ移動 of 26
www.avenview.co m 1 4 Display Video W all Processor User’s Guide Model DVI-VIDEOWALL-4 © 2008 Avenview Inc. All ri ghts reserved. The content s of this document are provided i n connection wit h Avenview Inc.
www.avenview.co m 2 Table of Conte nts Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards .......................................
www.avenview.co m 3 Section 1: Getting S tarted 1.1 Important Safe guards Please read all of these instr uctions carefully before you use the d evice. Save this manual for futu re reference. What the warr anty does not cover Any product, on which the serial number has been d efaced, modified or re moved.
www.avenview.co m 4 1.4 Introduction The DVI-VIDEOWALL -4 Display Du al-Image Video Wall Proc essor is a powerful and fully real time data/video processor for multiple flat p anel displays or projector s.
www.avenview.co m 5 1.5 Package Contents Before you start the in stallation of the con verter, please check the package con tents. - DVI -VIDEOWALL- 4 x 1 - DVI to DVI/VGA Y -Cable x 1 - VGA to Compon.
www.avenview.co m 6 1.6.2 I/O Conn ectors Connectors Video Source Input Connectors DVI IN DVI VGA (DVI to VGA Adap ter) Component (YPbPr ) (DVI to VGA Adap ter and VGA to Component Adapter) 1 x DVI 1 .
www.avenview.co m 7 Section 2: Instal lation Follow these instruction s for installation o f DVI -VIDEOWAL L-4: 1. Mount or fix the DVI -VIDEOW ALL-4 safely 2. While DVI-VIDEOWALL -4 switched o ff, connect monitor s/projectors or other DVI di splays by u sing 1 male to male high qu ality DVI cable to DVI -VIDEOWALL -4 3.
www.avenview.co m 8 2.1 Software Installati on and Setup 2.1.1 System Requir ements 1. The DVI -VIDE OWALL-4 provides a software contro l program which runs under Microsof t Windows 98, 2000, XP through th e interface of RS -232 serial control.
www.avenview.co m 9 4. While you move the mouse’s cursor n ear th e bord ers, in e ither red or blue, the icon of the cursor will change as shown b elow:.
www.avenview.co m 10 2.1.3 Softwar e Operation The software has follo wing menu op tions available: 1. File a. Connect b. Save Settings c. Load Settings d. IR Control e. Auto Sleep f. Device ID g. Factory Reset h. Exit 2. Background a. Resolution b. Layout c.
www.avenview.co m 11 c. Load Setting: The function will load the favorite settings fro m the previously saved file. d. IR Control: This will enable or disable the IR remote con trol. e. Auto Sleep : This decides if the DVI -VIDEOWALL -4 enters th e deep sleep mode if the video signal cannot be detected in t he main chan nel.
www.avenview.co m 12 c. HFlip: Horizontally flip the output video. d. VFlip: Vertically flip th e output video. e. SWAP: Swap the main an d sub channel. f. Color: The backgrou nd color selection. 3. Main a. Input Source: Select a video/graphic in put of the main channel.
www.avenview.co m 13 f. Pause: Freeze the display of the sub ch annel. 5. Control-Setting Dialog a. Border Select main or sub chan nel for further setting s “Clear All”: Clear all OSD ite ms “Apply”: Apply the settings 1. Border Color: Setup bord er’s color by clicking on “Color setting”.
www.avenview.co m 14 4. Text Color: Select the co lor of th e label by clicking on “Color Setting” butt on. 5. Text Auto: Wh ile selecting “Text Auto ”, the label on the screen for each channel will display its corre sponding input chann el type.
www.avenview.co m 15 b. Image 1. Choose the scaling typ e for the main ch annel at full screen display. 2. While Blend is select ed, users can use the slider to control the d egree of blending. c. Color 1. Select the main or sub ch annels. 2. Reset: Restore all th e setting on this page back to their default values.
www.avenview.co m 16 d. Zoom 1. Select the main or sub channel. 2. Default: Restore the s elected chan nel without zoom effect. 3. This slider control s the ratio of Zoom. 4. The workplace for con trolling the display ed area after zooming the sel ected video.
www.avenview.co m 17 e. Pattern 1. While “Pattern Model” is cho sen, the ou tput will display the selected p attern. While unselecting this item, the o utput display works normally. 2. The orange border indicate s which pattern is currently selected.
www.avenview.co m 18 f. HS / VS Dela y 1. Select the main or sub channel. 2. The fine movement of th e selected channel. g. EDID Code 1. Save: Save the read back EDID Content in PC. 2. Setting: Automatically setup the output resolution according to th e content of E DID.
www.avenview.co m 19 Control Display Layout Users can define the resolutio n of the ou tput video to displays. X Total & Y Total.
www.avenview.co m 20 X Start, X End, Y S tart, Y End For each display, user s can define which section in th e resulting mixed vid eo should be displayed. After setup the X Total and Y Total, u sers need to define the up per -left (X Start, Y Start) an d bottom -right (X End, Y End) corners for each display .
www.avenview.co m 21 In “Temperature Type”, th ere are two types of temperatur e representation, Ce l sius and Fahrenheit, for the VFD display. 2.2 Cascading Multiple Devices The DVI -VIDEOWALL-4 has a dual view p rocessor, which allows y ou to see 2 videos on the same screen.
www.avenview.co m 22 Section 3 : Specif ications and Suppor ted Resolut ions 3.1 Specifications Model DVI-VIDEOWALL-4 Description 4 Display Dual Image Vid eo Wall Processor Output Displays 4 Dual Output Support Yes (DVI & VGA) Video Loop Out Yes Video Bandwidth DVI Single Link - 4.
www.avenview.co m 23 3.2 Supported Resol utions The following resolutions are supported by D VI -VIDEOWALL -4 3.2.1 DVI- IN 3.2.2 VGA Supported Mode Resolution NTSC/480i/525i 720x240 @60Hz PAL/576i /6.
www.avenview.co m 24 3.2.3 DVI-OUT Supported Mode Resolution (HDTV) 720p 1280x720 @50Hz (HDTV) 720p 1280x720 @60 Hz (HDTV) 1080p 1920x1080 @60 Hz VESA 640x480 @60 Hz VESA 800x600 @60 Hz VESA 1024x768 .
www.avenview.co m 25 Section 4 : General Troublesh ooting Problem Possible Solution No Power Ensure that DVI -VIDEOWALL-4 is plugged in If you are recovering fro m power outage, accidentally unplug the adapter or oth er power surge conditions, leave th e device off for a while and then p ower it on again.
www.avenview.co m 26 Disclaimer While eve ry precaution ha s been taken in t he preparation o f this document, Avenview Inc . assumes no li ability with r espect to the operati on or use of Avenvi ew .
デバイスAvenview DVI-VIDEOWALL-4の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Avenview DVI-VIDEOWALL-4をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAvenview DVI-VIDEOWALL-4の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Avenview DVI-VIDEOWALL-4の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Avenview DVI-VIDEOWALL-4で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Avenview DVI-VIDEOWALL-4を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAvenview DVI-VIDEOWALL-4の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Avenview DVI-VIDEOWALL-4に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAvenview DVI-VIDEOWALL-4デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
