SennheiserメーカーHME 26の使用説明書/サービス説明書
ページ先へ移動 of 21
Instruction manual HME 26 HMD 26 Broadcast HMDC 26.
1 Safety instructions y Please read these instructio ns carefully and completely before using the headset. y Make these instructions easily accessible to all users at all times. y Always include these instructions when passing the headset on to third parties.
2 Intended use of the headset Intended use includes: • having read this instruction manual especially the chapter “Safety instructions”. • using the headset within the operating conditions as described in this instruction manual.
3 HMD 26 / HME 26 / HMDC 26 The HMD 26/HMe 26/HMDC 26 headsets feature dynamic, closed headphones. The noise-compensating microphone of the HMD 26 and HMEC 26 ensures excellent speech transmission even in noisy environments. The headsets have been designed for broadcast use, e.
4 Delivery includes y 1 HMD 26 / HME 26 / HMDC 26 headset y 1 cable clip y 1 wind and pop screen y 1 instruction manual Operation T urning the microphone boom The microphone boom can be ro tated by 180°. This allows the headset to be worn with the microphone boom positioned on either the left or right-hand side of the head.
5 Switching the microphone transmission off If, during turning, the microphone boom is in the middle position (90°), the microphone transmission will be switched off in order to prevent disturbing noise. Putting on the headset When putting on the headset, the patented two-piece headband adjusts automatically.
6 Positioning the microphone Bend the flexible microphone boom so that the micro- phone is placed at the corner of the mouth. Maintain a distance of approx. 2 cm between microphone and mouth. Always use the supplied wind and pop screen. Flipping away one earcup The headset features a “flip -away” earcup for single- sided listening.
7 Adjusting the volume directly on the audio system Connect the headset to the corresponding sockets of your audio system. Adjust the volume directly on the audio system. Switching ActiveGard™ on and off (HME/HMD) ActiveGard™ safeguards your ears from volume peaks above 105 dB, which can be transmitted via the audio system or radio equipment.
8 Operating control for HMDC 26 in conjunction with cable -B-6 Switching NoiseGard™ on/off The NoiseGard™ ON/OFF switch 쐃 allows you to switch the NoiseGard™ active noise compensation on or off. With NoiseGard™ switched off, t he headset can be used as a conventional headset.
9 Powering NoiseGard™ via two (rechargeable) batteries Insert two 1.5 V AA alkaline batteries (IEC LR 6) or two 1.2 V AA rechargeable batteries (IEC LR 6). Observe correct polarity when inserting the batteries. The operating time with batteries/rechargeable batteries is approx.
10 Care and maintenance Cleaning the headset Use a sof t, slightly damp cloth to clean the headset from time to time. If the headset is very dirty, use a cloth dampened with mild, soapy water. Do not use any solvents or cleansing agents. Replacing the earpads For reasons of hygiene, the earpads should be replaced from time to time.
11 Accessories and spare parts By changing the cable, you can simply retrofit your headset (see “Product variants” on page 13). y Cable -6 Cat. No. 500836 y Cable -7 Cat. No. 502360 y Cable -B-6 (HMDC) Cat. No. 502470 y Cable -H-6 Cat. No. 502533 y Cable -X4F Cat.
12 y Cable clip MZQ 2002 Cat. No. 044740 y Cable clip HZC 08 Cat. No. 525787 Cable clips HZC 08 MZQ 2002 (for round or flat cable) (for round cable only) Book_523984_1208_ SP7.
13 Product variants Variant (Cat. No.) (Part Number) Description Cable, length 2 m HMD 26-600* (502463) (026-EA) 600 Ω per system, dynamic microphone – HMD 26-600-X3K1 (502466) (026-EA-999-0E36) 600 Ω per system, dynamic microphone Steel wire cable with XLR-3 connector and ¼“ (6.
14 Cable and connector assignment Headset connector Cable -6 (HMD/HME) Cable -7 (steel wire cable, HMD/HME) Lato saldato white Audio Hi left orange Audio Hi right brown Audio Lo left green Audio Lo ri.
15 Cable -H-6 (HMD/HME) Cable -X4F/cable -H-X4F (HMD/HME) Cable -X5/cable -H-X5 (HMD/HME) white orange brown green red blue Screen Audio Hi left Audio Hi right Audio Lo left Microphone Hi Microphone L.
16 Cable -X3K1/cable - H-X3K1 (HMD/HME) Cable -X3K1-P48 (HME*) * Together with the cable -X3K1-P48, the HME 26 is designed for P48 phantom powering as per DIN 45596.
17 Specifications HMD 26-600/-100 Headphones Transducer principle dynamic, closed Ear coupling supra-aural Frequency response 20–18,000 Hz Impedance HMD 26-600 300 Ω mono/600 Ω stereo HMD 26-600.
18 Specifications HME 26-600/-100 Headphones Transducer principle dynamic, closed Ear coupling supra-aural Frequency response 20–18,000 Hz Impedance HME 26-600 300 Ω mono/600 Ω stereo HME 26-600.
19 Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 2 years on this product. For the current warranty conditions, please visit our web site at www.
Sennheiser electronic GmbH & Co. KG Printed in Germany Am Labor 1, 30900 W edemark, Germany Publ. 01/09 www.sennheiser.com 523984/A01.
デバイスSennheiser HME 26の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sennheiser HME 26をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSennheiser HME 26の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sennheiser HME 26の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sennheiser HME 26で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sennheiser HME 26を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSennheiser HME 26の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sennheiser HME 26に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSennheiser HME 26デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。