Servis-Rhinoメーカー1480の使用説明書/サービス説明書
ページ先へ移動 of 104
© 201 1 Alamo Group Inc. $0.00 1480/1485/ 1495 Published 01/1 1 Part No. F-4122C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.
T o the Owner/Operator/Dealer All implements with m oving part s are potentially hazard ous. There is n o substitute for a cautious, sa fety-minded operator who recognizes the poten tial hazards and follows r easonable safety practices.
T ABLE OF CONTENTS SAFETY SECTION ... .................................................................. ................... 1-1 General Safety Instructions and Practic es ................ ................ ................ .................... .......
MAINTENANCE SECTION ............... ............................................................. 5-1 Lubrication Schedule ............................. ................ ................ ................ ................ ............. ............. ..
Safety Section 1-1 SAFETY SECTION.
SAFETY 1480/1485/1495 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor . Safety is of primary import ance to the manu facturer and should be to the owner/operator .
SAFETY 1480/1485/1495 01/11 Safety Section 1-3 © 201 1 Alamo G roup Inc. SAFETY Never allow children to operate, ri de on, or come close to the T ractor or Implement.
SAFETY 1480/1485/1495 01/11 Safety Section 1-4 © 201 1 Alam o Group Inc. SAFETY Operator Safety Inst ructions and Practices Never operate the T ractor or Implement until you h ave read and completely under stand th is Manual, the T ractor Operator ’s Manual, an d each of the Safety Messages found in the Manual or on the T ractor and Implement.
SAFETY 1480/1485/1495 01/11 Safety Section 1-5 © 201 1 Alamo G roup Inc. SAFETY Use extreme caution when getting onto the Impl eme nt to perform repairs, main tenance and when removing accu mulated material . Only st an d on solid flat surfaces to ensur e good footing.
SAFETY 1480/1485/1495 01/11 Safety Section 1-6 © 201 1 Alam o Group Inc. SAFETY Equipment Operation Safety In structions and Practices This Implemen t may be wider than the T ractor .
SAFETY 1480/1485/1495 01/11 Safety Section 1-7 © 201 1 Alamo G roup Inc. SAFETY Do Not operate this eq uipment in areas where in sects such as bees may att ack you and/or cause you to lose contro l of the equip ment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insects fr om entering.
SAFETY 1480/1485/1495 01/11 Safety Section 1-8 © 201 1 Alam o Group Inc. SAFETY S tore the gra pple bucket or ba le spear attachment with the point(s) on the ground. W alking into the point of the bale or grapple spea r can cause serious bodily injury .
SAFETY 1480/1485/1495 01/11 Safety Section 1-9 © 201 1 Alamo G roup Inc. SAFETY Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s.
SAFETY 1480/1485/1495 01/11 Safety Section 1-10 © 201 1 Alam o Group Inc. SAFETY Do not use loader a s a jack to raise the tractor tires of f the ground. The loader co uld fail causing the tractor and loader to fall to the ground resulting in serious injury .
SAFETY 1480/1485/1495 01/11 Safety Section 1-11 © 201 1 Alamo G roup Inc. SAFETY Connecting or Disconn ecting Implement Safet y Instructions and Practices The center of gravity of a Po wer Unit equipped with a front -mounted Im plement is shifted to the front and remo ves weight from the rear whee ls.
SAFETY 1480/1485/1495 01/11 Safety Section 1-12 © 201 1 Alam o Group Inc. SAFETY T ransporting Safety Inst ructions and Practices Make sure all tractor and loade r guards are in place and properly functioning. Do not use an attachme nt if the roll back guards ar e damaged or missin g.
SAFETY 1480/1485/1495 01/11 Safety Section 1-13 © 201 1 Alamo G roup Inc. SAFETY Maintenance and Service Safet y Instructions and Practices Do not raise the loader on a hillside.
SAFETY 1480/1485/1495 01/11 Safety Section 1-14 © 201 1 Alam o Group Inc. SAFETY Do not modify or alter this Implement. Do not permit an yone to modify or alter this Implement, any of its compone nts or any Implem ent functio n.
SAFETY 1480/1485/1495 01/11 Safety Section 1-15 © 201 1 Alamo G roup Inc. SAFETY S torage and Parking Safety Instructions and Practices Concluding Safety Instr uctions and Practices Use caution and wear protective glo ves wh en handling sharp object s such as blades, knives, and o ther cutting edges.
SAFETY 1480/1485/1495 01/11 Safety Section 1-16 © 201 1 Alam o Group Inc. SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote safe op eration. Damage to the de cals may occur while in shipping, use, or reco nditioning.
SAFETY 1480/1485/1495 01/11 Safety Section 1-17 © 201 1 Alamo G roup Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1 53466 2 MODEL 1480 53467 2 MODEL 1485 53482 2 MODEL 1495 2 49696 1 LOGO Rhino, .
SAFETY 1480/1485/1495 01/11 Safety Section 1-18 © 201 1 Alam o Group Inc. SAFETY Decal Description 1480 P/N 53466 1485 P/N 53467 1495 P/N 53482 Rhino, Le ft P/N 49696.
SAFETY 1480/1485/1495 01/11 Safety Section 1-19 © 201 1 Alamo G roup Inc. SAFETY Rhino, Right P/N 51448 Don’t Work Un der Raised Loader P/N 46778 Avoid Injury During Inst allation P/N 51902 Use Onl.
SAFETY 1480/1485/1495 01/11 Safety Section 1-20 © 201 1 Alam o Group Inc. SAFETY T o Prevent Rollovers P/N 51900 Universal Call Before Digging P/N 48280 Read Manual Loader Safety Guides P/N 51904 Rea.
SAFETY 1480/1485/1495 01/11 Safety Section 1-21 © 201 1 Alamo G roup Inc. SAFETY Do not handle lar ge, he avy objects with loader in high raised position. Handle raised loads with caution. Tilt bucket fo rward when raising load. Always transport load low .
SAFETY 1480/1485/1495 01/11 Safety Section 1-22 © 201 1 Alam o Group Inc. SAFETY W AR NING! - Crushing Hazard. -T o A v oid Serious Injury or Death Make sure attachment is securely attached to the loader . See Operat or ’s Ma nual for inst ructions.
SAFETY 1480/1485/1495 01/11 Safety Section 1-23 © 201 1 Alamo G roup Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators.
.
Introduction Section 2-1 INTRODUCTION SECTION.
INTRODUCTION 1480/1485/1495 01/11 Introduction Section 2-2 © 201 1 Alam o Group Inc. INTRODUCTION This 1400 Series L oader is designed with care a nd built with quality material s by skilled workers.
INTRODUCTION 1480/1485/1495 01/11 Introduction Section 2-3 © 201 1 Alamo G roup Inc. INTRODUCTIO DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement.
INTRODUCTION 1480/1485/1495 01/11 Introduction Section 2-4 © 201 1 Alam o Group Inc. INTRODUCTION The RHINO Model 1400 Seri es Front End Loaders are desig ned for four-wheel drive tractors. They are intended to lift only loose materials that will fit in the bucket.
INTRODUCTION 1480/1485/1495 01/11 Introduction Section 2-5 © 201 1 Alamo G roup Inc. INTRODUCTIO Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely underst and the Safety Messages and instructions, and know how to operate correctly both the tractor and implement.
.
Assembly Section 3-1 ASSEMBL Y AND CONNECTING THE LOADER SECTION.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-2 © 201 1 Alam o Group Inc. ASSEMBL Y Assembly Instructions T o avoid injury during installation of the load er attachment, do not allo w bystanders with in 10 feet of load er or attachment . Always wear safety glasses when removing or installing buckets.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-3 © 201 1 Alam o Group Inc. ASSEMBL Y Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-4 © 201 1 Alam o Group Inc. ASSEMBL Y Proper Ballasting and Wheel S p acing S pread fro nt wheels to maximum distance. S pread rear wheels to maximum dis tance. Add rear wheel weight, rear ballast box or implement.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-5 © 201 1 Alam o Group Inc. ASSEMBL Y Dismounting and Mounting Loader Dismounting Loader Locate tractor and loader on firm level ground. 1. With bucket raised ab ove gr ound, tilt bucket down approximately 30 degree s from level.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-6 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting Loader Mounting is basically reve rse of dismo unting. 1. Slowly drive tractor into loader approximately 6” from loader mounts. Shut of f tractor engine and set park- ing brake.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-7 © 201 1 Alam o Group Inc. ASSEMBL Y Assembling Quick- Att ach Device Quick-attach device can be inst alled using tools ordinarily available . T orque all hardware to spec ifications listed in loader operator’s manual.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-8 © 201 1 Alam o Group Inc. ASSEMBL Y When Connecting an Att achment to the Loader Quick Hitch 1. Be sure both quick hitch pin levers are in the unlocked position, with th e levers pointing up.
ASSEMBLY 1480/1485/1495 01/11 Assembly Section 3-9 © 201 1 Alam o Group Inc. ASSEMBL Y 5. On level g round, tilt the attachment down 90 degrees and lower it to the ground. Lower the lo ader further to slightly raise the front of th e tractor of the tractor off the ground.
ASSEMBLY 1480/1485/149 5 01/11 Assembly Section 3-10 © 201 1 Alam o Group Inc. ASSEMBL Y Att aching V alve Mounting & V alve 1. Attach valve mounting st and on inside of right mi d mount using M1 0 x 45 mm bo lts, lockwashers, and hex nuts. 2. Attach valve to valve mo unting stand with M8 x 50 mm bo lts, lockwashers, and h ex nuts.
ASSEMBLY 1480/1485/149 5 01/11 Assembly Section 3-11 © 201 1 Alam o Group Inc. ASSEMBL Y Hose Plumbing 1. Connect pressure h ose from top front 90º e lbow fittin g on tractor hydraulic block to valve 90º elbow fitting left inlet on valve. (P Port).
.
Operation Section 4-1 OPERA TION SECTION.
OPERATION 1480/1485/1495 01/11 Operation Section 4-2 © 201 1 Alam o Group Inc. OPERA TION RHINO 1400 Series LOADER OPERA TION INSTRUCTIONS Y our 1400 Se ries Loader shou ld now be assemble d and inspected for any evidence of defective o r damaged part s before use.
OPERATION 1480/1485/1495 01/11 Operation Section 4-3 © 201 1 Alam o Group Inc. OPERA TION 1. St andard Equipment and Specifications • Capab le of liftin g as much as 1,228 pound s of material to a m aximum height of 102”, the 1400 Series Loaders from Rhino ma ximize the value of your tractor by helping with a wide range of job s.
OPERATION 1480/1485/1495 01/11 Operation Section 4-4 © 201 1 Alam o Group Inc. OPERA TION 2. Operator Requirement s DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement.
OPERATION 1480/1485/1495 01/11 Operation Section 4-5 © 201 1 Alam o Group Inc. OPERA TION Never run the T ractor engine in a closed building or without adequate ventilation.
OPERATION 1480/1485/1495 01/11 Operation Section 4-6 © 201 1 Alam o Group Inc. OPERA TION 3. T ractor Requirement s Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION 1480/1485/1495 01/11 Operation Section 4-7 © 201 1 Alam o Group Inc. OPERA TION T ractor Requirement s and Cap abilities • ASABE approved Roll-Over Protective S tru cture (ROP S) or RO PS cab and seat belt. • T ractor Saf ety Devices ..
OPERATION 1480/1485/1495 01/11 Operation Section 4-8 © 201 1 Alam o Group Inc. OPERA TION 4. Getting On and Off the T ractor 4.1 Boarding the T ractor T o ens ure tractor stab ility when operating add wheel ballast or rear weights to rear trac tor tires.
OPERATION 1480/1485/1495 01/11 Operation Section 4-9 © 201 1 Alam o Group Inc. OPERA TION 4.2 Dismounting the T ractor Use both hands and equ ipped handrails and step s for supp ort when boar ding the tractor . Never use control levers for suppor t when mounting the tractor .
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-10 © 201 1 Alam o Group Inc. OPERA TION 5. St arting the T ractor Never run the T ractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your hea lth.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-11 © 201 1 Alam o Group Inc. OPERA TION 6. Pre-Operation Inspection and Service Periodically inspect all moving part s for wear and replace whe n necessary with au thorized service part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-12 © 201 1 Alam o Group Inc. OPERA TION 6.2 Loader Pre-Operation Inspection and Service Before operation, a complete inspection and ser vice is required to ensur e the loader is in a good a nd safe working condition.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-13 © 201 1 Alam o Group Inc. OPERA TION The operator’s manual and safety signs af fixed on the unit contain important instru ctions on the saf e and proper use of the equi pment.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-14 © 201 1 Alam o Group Inc. OPERA TION HYDRAULIC LINE INSPECTION • Check for hydraulic le aks along hoses, cylinders and fittings. IMPORT ANT : DO NOT use your hands to check for oil leaks. Use a piece of heavy p aper or cardboard to check for hydraulic oil leaks.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-15 © 201 1 Alam o Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#______________________ Make____________________ Date_______.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-16 © 201 1 Alam o Group Inc. OPERA TION FRONT END LOADER PRE- OPERA TION Inspection Front End Loader ID#_______________Make____________________ Da.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-17 © 201 1 Alam o Group Inc. OPERA TION 7. Driving the T ractor and Loader This Implemen t may be wider than the T ractor .
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-18 © 201 1 Alam o Group Inc. OPERA TION Safe tractor transport requ ires the operator possess a thorough knowledge o f the model being op erated and precautions to t ake while driving with an attached imp lem ent.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-19 © 201 1 Alam o Group Inc. OPERA TION Do not raise the loader on a hillside. Do not transport across a slope with a raised loader . When the loader is raised, the center of gravity of the tractor and loader is ra ised increasing the pote ntial for the tractor to tip over .
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-20 © 201 1 Alam o Group Inc. OPERA TION Keep bysta nders 10 feet away from the tractor and load er while operating. The byst anders could enter the p ath of the tractor or items could fall from the loader resultin g in serious injury to the byst ander .
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-21 © 201 1 Alam o Group Inc. OPERA TION Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-22 © 201 1 Alam o Group Inc. OPERA TION Do not use loader a s a jack to raise the tractor tires of f the ground. The loader co uld fail causing the tractor and loader to fall to the ground resulting in serious injury .
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-23 © 201 1 Alam o Group Inc. OPERA TION Always have a heavy att achment, such as a bu cket mounted on loader when it is removed from tractor . It is importan t not to put excessive weig ht on parking stands with lift cylinder retr action.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-24 © 201 1 Alam o Group Inc. OPERA TION 8.1 Operating the Loader FILLING THE BUCKET Approach and enter th e pile with a level bucket. Loaders wit 1-lever control, ease lever back toward you to lif t and roll back bucket.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-25 © 201 1 Alam o Group Inc. OPERA TION Lift and roll back of bucket will increase efficiency because.... A level bucket throughout the lifting cycle resist s bucket lift and increa ses breakaway ef f ort.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-26 © 201 1 Alam o Group Inc. OPERA TION LIFTING THE LOAD When lifting the load, ke ep the bucket positioned to avoid spillage.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-27 © 201 1 Alam o Group Inc. OPERA TION When transportin g the load, keep bucket as low as possible, to avo id tipping, in case a wh eel drops in a ru t. DUMPING THE BUCKET Lift bucket high enough to clear side of vehicle.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-28 © 201 1 Alam o Group Inc. OPERA TION OPERA TING WITH FLOA T CONTROL During hard surfac e operation, keep bucket level and put lift control in float position to pe rmit bucket to fl oat on working su rface.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-29 © 201 1 Alam o Group Inc. OPERA TION Side cutting is a good techniq ue for cutting down a big pile. If the pile sides are too high and liable to cause cave-in, use loader to break down the sides until a slot can be cut over the top.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-30 © 201 1 Alam o Group Inc. OPERA TION It is important to ke ep the bucket level wh en approaching a bank or pile . This will help prevent gouging the work ar ea. PEELING AND SCRAPING Use a slight bucket angle, travel forward and hold lift control forwar d to start the cut.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-31 © 201 1 Alam o Group Inc. OPERA TION Make additional pa sses until desired depth is reached. Dur ing each pass, use on ly bucket control while working dep th. This will allow you to concentrate on cont rolling bucket angle to mainta in a precise cut.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-32 © 201 1 Alam o Group Inc. OPERA TION BACKFILLING Approach pile wit h a level bucket. Poor methods ac tually move no mo re dirt and make it more dif ficult to hold a level grade. Do not use bucket in dumped positio n for bulldozing.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-33 © 201 1 Alam o Group Inc. OPERA TION Leave dirt in bu cket. Dumpin g on each pass wastes time. Operate tractor at ri ght angles to ditch. T ake a s big a bite as tractor can handle without lugging down.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-34 © 201 1 Alam o Group Inc. OPERA TION Leave dirt which drif ts over side of bucket for final cleanup.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-35 © 201 1 Alam o Group Inc. OPERA TION 8.2 Operating Bale Spear Operate the bale spear using extreme caution. Sharp point s on bale spear can cause serious injur y or death. Because of size and we ight of large bales, e xtreme care must be t aken in handling them.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-36 © 201 1 Alam o Group Inc. OPERA TION Carry bales as low to the ground as pos sible to allow maximum visibility and avoid tipping.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-37 © 201 1 Alam o Group Inc. OPERA TION T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-38 © 201 1 Alam o Group Inc. OPERA TION 10.1 T ransporting on Public Roadways Inherent hazards of operating the tr actor and implement and the possibilit y of accidents are not left behind when you finish work ing in an area.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-39 © 201 1 Alam o Group Inc. OPERA TION Extreme caution should be used wh en transporting the tractor and imp lement on public roadways.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-40 © 201 1 Alam o Group Inc. OPERA TION 10.2 Hauling the T r actor and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimensions and gross weight of the complete loaded unit.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-41 © 201 1 Alam o Group Inc. OPERA TION 1 1. T roubleshooting Guide TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Loader slow or will not lif t Hydraulic oil too heav y . Change to proper oil. and/or dump Oil filter plugged.
OPERATION 1480/1485/149 5 01/11 Ope ration Section 4-42 © 201 1 Alam o Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Excessive wear on Bucket is riding on cutting Use boom “FLOA T” position or cutting edge edge instead of wear runners.
Maintenanc e Section 5-1 MAINTENANCE SECTION.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-2 © 201 1 Alam o Group Inc. MAINTENANCE READ, UNDERST AND, and FOLLOW the following Safety Messag es. Serious injury or death may occur unless care is t aken to follow the warnings and instructions st ated in the Safety Messages.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-3 © 201 1 Alam o Group Inc. MAINTENANCE Never perform main tenance beneath a raised load er un less loader is properly sup ported to prevent accide ntal lowering. Do Not fill fuel tank while engine is running.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-4 © 201 1 Alam o Group Inc. MAINTENANCE Lubrication Schedule Before operating your Loader , take the time to inspect a nd re pair any damag e to the machine or tractor .
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-5 © 201 1 Alam o Group Inc. MAINTENANCE Daily Checks Regular maintenance of your loader and hydraulic system will insure maximum load er efficiency and long life. 1. Ch eck fluid level o f tractor hydr aulic system b efore starting each days operation.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-6 © 201 1 Alam o Group Inc. MAINTENANCE Hydraulic Cylinder Loader cylinders are designed to be re liable and easy to service.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-7 © 201 1 Alam o Group Inc. MAINTENANCE Lif t and Bucket Cylind er Reassembly NOTE: Be careful not to damage seals and o- rings on edges or holes in cylinder tube. Inspect an d remove burrs and sharp ed ges if necessary be fore reassemb ly .
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-8 © 201 1 Alam o Group Inc. MAINTENANCE St o r a ge NOTE: When loader hydraulics are di sconnected from tractor , the tractor hydraulic circuit must be completed. Failure to do so will result in tractor hy draulic pump damage.
MAINTENANCE 1480/1485/149 5 01/11 Maintenan ce Section 5-9 © 201 1 Alam o Group Inc. MAINTENANCE 3. Do not remove attachment from stored loader . 4. Do n ot allow children t o play on or around loader .
MAINTENANCE 1480/1485/149 5 01/11 Main tenance Section 5-10 © 201 1 Alam o Group Inc. MAINTENANCE Proper T orque for Fasteners The chart lists the corre ct tightening torque for fa stener s.
MAINTENANCE 1480/1485/149 5 01/11 Main tenance Section 5-11 © 201 1 Alam o Group Inc. MAINTENANCE.
MAINTENANCE 1480/1485/149 5 01/11 Main tenance Section 5-12 © 201 1 Alam o Group Inc. MAINTENANCE.
.
RHINO LIMITED W ARRANTY 1. LIMITED W ARRANT IES 1.01. Rhino warrants for one year from the purchase date to the orig inal non-commercial, governmenta l, or municipal purchaser (“ Pur- chaser”) and.
T O THE OWNER/OPERA T OR/DEALER T o keep your implement running ef ficiently and safely , read your manual thor oughly and follow these dire ctions and the Safety Messages in this Manual. T he T able of Contents clearly ident ifies each sect ion where you ca n easily find the informa tion you need.
1 48 0 / 1 4 8 5 / 1 4 9 5 - S O M -0 1 / 1 1 P/ N F - 4 1 22 C Printed U.S.A 1480/1485/1495 FRONT END LOADER.
デバイスServis-Rhino 1480の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Servis-Rhino 1480をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはServis-Rhino 1480の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Servis-Rhino 1480の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Servis-Rhino 1480で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Servis-Rhino 1480を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はServis-Rhino 1480の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Servis-Rhino 1480に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちServis-Rhino 1480デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。