SharpメーカーLC-32DH77Vの使用説明書/サービス説明書
ページ先へ移動 of 48
LC-32DH77E LC-32DH77V LC-42DH77E LC-42DH77V LC-46DH77E LC-46DH77V LC-52DH77E LC-52DH77V TELEWIZOR K OL OROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVK OU TELEVÍZOR S F AREBNOU LCD .
[ 773.0 ] [ 516 ] [ 699.2 ] [ 45.0 ] [ 270.2 ] [ 85.7 ] [ 143.0 ] [ 200.0 ] [ 200.0 ] [ 103.3 ] [ 328.9 ] [ 393.8 ] [ 573.0 ] [ 528.0 ] SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-r ewireable (moulded) plug incorporating a 13A fuse.
OPERA TION MANUAL Contents ............................................................................. 1 Introduction ........................................................................ 2 Dear SHARP customer ....................................
Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moistur e—Do not use the product near water , such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
Introduction 15 16 17 18 19 20 21 22 23 24 25 4 3 2 5 6 7 8 9 10 11 12 13 14 1 B (Standby/On) (Page 10) Buttons for useful operations m (T eletext) A TV : Display analogue teletext (Page 13). DTV : Select MHEG-5 and teletext for DTV (Page 13). k (Reveal hidden T eletext) (Page 13) [ (Subtitle) Switch subtitle languages on/off (Pages 13 and 28).
Introduction 2 1 3 16 7 8 9 10 4 56 13 12 11 14 15 EXT4 (ANALOGUE RGB/AUDIO) terminals* HDMI1 (HDMI) terminal HDMI2 (HDMI/AUDIO) terminals* EXT3 (COMPONENT/AUDIO) terminals OUTPUT (AUDIO) terminals DI.
LC-32DH77E, LC-32DH77V : Confirm that there ar e eight screws with the stand unit. Attach the supporting post for the stand unit onto the base using the four screws with the screw driver (supplied) as shown.
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries.
Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Connect an antenna cable to the antenna terminal (Page 8).
Quick guide Supplying power to the antenna Y ou must supply power to the antenna in order to receive digitally/terrestrially br oadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV . Press MENU and the “MENU” screen displays.
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another . Press a on the TV . The initial auto installation wizard appears.
W atching TV Selecting a sound mode DTV mode: If multi sound modes are r eceived, each time you press 2 the mode switches as follows. Audio (ENG) : STEREO L/R LR L R Audio (ENG) : CH A CH A CH B CH AB Audio (ENG) : MONO Press c / d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
W atching TV Useful functions E Common Operation Press MENU and the “MENU” scr een displays. Press c / d to select “Digital Setup”. Press a / b to select “EPG Setup”, and then press OK .
Check programme information Press a / b / c / d to select the pr ogramme you want to check. Press R . 040 10 : 00AM - 1 : 00 AM BBC News 24 BBC News Programme Info.
Buttons for teletext operations Buttons Description P r / s Increase or decrease the page number . Colour (R/G/ Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (R/G/Y/B) on the remote control unit.
Connecting exter nal devices Before connecting ... Be sure to turn off the TV and any devices befor e making any connections. Firmly connect a cable to a terminal or terminals. Carefully r ead the operation manual of each exter nal device for possible connection types.
Connecting external devices HDMI connection The HDMI connections permit digital video and audio transmission via a connection cable from a player/ recor der . The digital pictur e and sound data are transmitted without data compression and ther efore lose none of their quality .
Connecting external devices NOTE In cases when the decoder needs to receive a signal from the TV , make sure to select the appropriate input terminal to which the decoder is connected in “Manual Adjust” in the “Analogue Setting” menu (Page 27).
Connecting external devices DIGIT AL AUDIO IN AUX 1 I N L R AUX OUT L R Connecting an amplifier with analogue audio input E Connecting an amplifier with digital audio input E Speaker/amplifier connection Connect an amplifier with external speakers as shown below .
Connecting external devices Inserting a CA Card In order to r eceive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV (Page 8). The CI Module and the CA Card ar e not supplied accessories.
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD player/recorder , Blu-ray player/recorder) using a single remote contr ol unit.
AQUOS LINK AQUOS LINK Control Set to “On” to enable HDMI CEC functions. Press MENU and the “MENU” scr een displays. Press c / d to select “Option”. Press a / b to select “AQUOS LINK Setup”, and then press OK . Press a / b to select “AQUOS LINK Contr ol”, and then press OK .
AQUOS LINK Open the remote contr ol unit’ s flip cover , and then press OPTION . Press a / b to select “Setup Menu”, and then press OK . NOTE If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby , etc.
Menu operation 1 Picture Contrast OPC [Off] Brightness Colour Tint Sharpness Advanced Reset [+30] [0] [0] [0] [0] 0 –30 –30 –30 –10 +40 +30 +30 +30 +10 Backlight [+14] –16 +16 DYNAMIC ECO En.
Basic adjustment NOTE When set to “On”, the TV senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor , which could af fect its ability to sense surrounding light. • This TV provides various advanced functions for optimising the picture quality .
Basic adjustment NOTE The item marked with * is available only when selecting “HDMI1”, “HDMI2”, “HDMI3” or “EXT4” from the “INPUT SOURCE” menu. The item marked with ** is available only when accepting an “x.v .Colour” signal through an HDMI terminal.
Power Save Settings ECO Energy Save No Signal Off No Operation Off Sleep Timer [ Standard] [Disable] [Disable] Basic adjustment No Signal Off ECO When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes.
Channel Settings Auto Installation Basic adjustment Auto Installation Setup The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigur e the settings after the initial auto installation has been completed.
Basic adjustment Channels with “Skip” set to “On” are passed over when using P r / s even if selected while watching the image from the TV . When connecting a decoder to the TV , you need to select “EXT1” or “EXT2”. NOTE The factory preset value is “Off”.
Basic adjustment Child Lock Setup Allows you to use a PIN to protect certain settings from being accidentally changed. NOTE PIN input is required when executing “Child Lock”. The default PIN is “1234”. T o clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN on page 40.
Useful viewing functions WSS Setup WSS signal 4:3 screen 4:3 Mode Setup The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. 4:3 mode “Panorama” 4:3 mode “Normal” The “WSS” allows the TV to switch automatically among the differ ent picture size.
Y ou can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV . REC Picture Size Digital Setup Setting to “4:3 TV” Setting to “16:9 TV” This function allows you to automatically change to the appropriate pictur e size when viewing an HDMI signal using the HDMI1, 2 and 3 terminals.
Useful viewing functions Time Display Option Time Format Y ou can select the time format (either “24HR” or “AM/ PM”) for the clock time. Game Play Time Option This function allows you to display the elapsed time on the screen when “A V MODE” is set to “GAME”.
Other useful featur es Input Select Option For setting the signal type of external equipment. NOTE If no (colour) image displays, try changing to another signal type. Check the operation manual of the external equipment for the signal type. • • Input Label Setup Y ou can label each input source with a custom description.
Other useful features USB Photo Viewer/Music Player In this mode, you can enjoy viewing photos and listening to music from external USB devices. Select “USB” from the “INPUT SOURCE” menu to enter this mode. NOTE Y ou cannot enter this mode when ther e is no USB device connected to the TV .
Slide show Selecting the BGM File name SONGS Demo/Demo1 CLASSIC SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_08.MP3 SONG_09.MP3 Time 3:05 3:15 3:02 6:05 4:52 0:00 3:13 3:23 3:33 Playing: SONG_02.MP3 Slide Show BGM: SONG_03.
Connecting a PC When using the EXT4 terminal, you must select “EXT4 (RGB)” in the “PC Audio Select” menu (Refer to the right column for details). NOTE The PC input terminals are DDC1/2B-compatible. Refer to page 38 for a list of PC signals compatible with the TV .
Connecting a PC Press a / b to select the specific adjustment item. Press c / d to adjust the item to the desir ed position. 1 2 Reset H-Pos. [ 90] ab ab ab ab V-Pos. Clock Phase [ 39] [ 90] [ 20] NOTE Y ou can only select the “Input Signal” on the “Setup” menu when receiving one of the two input signals listed above.
Connecting a PC C1 C2 C3 C4 P1 P2 P3 P4 Communication conditions Set the RS-232C communications settings on the PC to match the TV’ s communications conditions.
Connecting a PC NOTE This TV has only limited PC compatibility , corr ect operation can only be guaranteed if the video card conforms exactly to the VESA 60 Hz standard.
Appendix T roubleshooting Problem Possible Solution No power . • Check if you pressed B on the remote contr ol unit. If the indicator on the TV lights up red, press B . Is the AC cord disconnected? Check if you pressed a on the TV . • • • The TV cannot be operated.
Appendix Download Setup Digital Setup Message List Information Go to “MENU” > “Setup” > “Reset”. Press c / d to select “Y es”, and then press OK . “Now , TV will restart automatically . OK?” displays on the screen. Press c / d to select “Y es”, and then press OK .
Appendix Specifications Item 32 o LCD COLOUR TV , Model: LC-32DH77E, LC-32DH77V LCD panel 32 o Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1,920 g 1,080) Video Colour System P AL/SECAM/NTSC 3.
Appendix Item 42 o LCD COLOUR TV , Model: LC-42DH77E, LC-42DH77V 46 o LCD COLOUR TV , Model: LC-46DH77E, LC-46DH77V 52 o LCD COLOUR TV , Model: LC-52DH77E, LC-52DH77V LCD panel 42 o Advanced Super Vie.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and ele.
Rating table for Child Lock AGE 456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 Universal viewing ✔ —————————————— Parental approval pr ef. ✔✔✔✔✔ —————————— X-rated ✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔ Universal viewing Parental approval pref.
[ 773.0 ] [ 516 ] [ 699.2 ] [ 45.0 ] [ 270.2 ] [ 85.7 ] [ 143.0 ] [ 200.0 ] [ 200.0 ] [ 103.3 ] [ 328.9 ] [ 393.8 ] [ 573.0 ] [ 528.0 ] SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-r ewireable (moulded) plug incorporating a 13A fuse.
LC-32DH77E LC-32DH77V LC-42DH77E LC-42DH77V LC-46DH77E LC-46DH77V LC-52DH77E LC-52DH77V TELEWIZOR K OL OROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVK OU TELEVÍZOR S F AREBNOU LCD .
デバイスSharp LC-32DH77Vの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp LC-32DH77Vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp LC-32DH77Vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp LC-32DH77Vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp LC-32DH77Vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp LC-32DH77Vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp LC-32DH77Vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp LC-32DH77Vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp LC-32DH77Vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。