SharpメーカーLC-46G7Xの使用説明書/サービス説明書
ページ先へ移動 of 56
LCD COLOUR TELEVISION OPERA TION MANU AL LC-46G7X MODEL LC-G7X_Cover1 06.12.21, 8:54 AM 1.
LC-G7X_Cover3 06.12.21, 8:54 AM 1.
1 LCD COLOUR TELEVISION LC-46G7X Dear SHARP customer Thank y ou for y our purchase of the SHARP LCD colour TV product. T o ensure safety and man y year s of troub le-free operation of y our pr oduct, please read the Impor tant Safety Precautions carefull y before using this product.
2 Contents Useful adjustment settings ……………………………… 32 Password setting for child lock (for TV input mode) ……………………………… 32 Speaker Setup …………….
3 Impor tant Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Stand—Do not place the product on an unstable cart, stand, tripod or table.
4 Supplied accessories Make sure the following accessories ar e provided with the product. Page 6 AC cord Remote control unit “AAA” size battery ( g 2) Page 15 Page 5 Cable clamp ( g 2) Page 6 Safety restraints Page 9 Restraining brackets Screws for brackets Clamps Screws for clamps NO TE • Always use the AC cord supplied with the TV .
5 1 Open the battery cover . 2 Insert two supplied “AA A” size batteries. • Place batteries with their ter minals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion.
6 TV (rear view) Setting the TV Notes on installing the TV • Avoid dir ect sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. Preparation Connecting the A C cord, antenna, and external equipment to the TV 1 2 Removing the terminal co ver Press down the hooks to remove the co ver towar d y ou.
7 Preparation Setting the TV on the wall • Y ou can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket. • For details, r efer to the instructions supplied with the optional bracket. CA UTION • This TV should be mounted on the wall only with the AN-37A G2/AN-52AG1 (SHARP) wall mount brac ket.
8 Removing the speaker s The unit’ s speakers can be attached and removed. Before detac hing/attaching the speaker s • Before detaching (or attaching) the speakers, unplug the AC cor d from the AC outlet. • Remove all terminal covers and connected cables.
9 Pr otection against o ver turning There is a danger of the pr oduct over turning in the case of a disaster or sudden collision. Carr y out the following tip-resistant measur ement for your safety . Anchoring the TV to the wall or a pillar Preparation Fix the TV to the wall using extra strong ties (commer cially available).
10 Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna T o enjoy a clearer pictur e, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
11 Y ou can connect many types of external equipment to your TV , like a VCR, DVD player , HDTV tuner , game console and camcorder . T o view exter nal sour ce images, select the input source fr om TV/VIDEO on the remote control unit or TV/VIDEO on the TV .
12 Preparation Connecting a Digital TV STB (Set T op Box) Y ou can use the INPUT 1/INPUT 2 (component) or INPUT 4/INPUT 5 (HDMI) terminal when connecting to a Digital TV STB and other audiovisual equipment. NO TE • When using a DVI-HDMI conversion adaptor , input the Audio Signal from the AUDIO terminal of INPUT 5.
13 P ar t names TV (Fr ont) POWER indicator OPC sensor PO WER (On/Off) button TV/VIDEO button V olume up (+)/down (–) buttons Channel up ( r )/down ( s ) buttons Remote control sensor *OPC: Optical Picture Contr ol (See page 26.
14 P art names TV (Rear) INPUT 2 terminals INPUT 3 terminals INPUT 1 terminals INPUT 4 (HDMI) terminal AC INPUT terminal RS-232C terminal MONITOR OUT terminals Antenna input terminal INPUT 5 (HDMI) terminals INPUT 6 terminals LC-G7X_E-c 06.
15 P art names Remote contr ol unit 2 6 11 1 8 7 10 5 9 16 21 19 18 13 14 17 15 22 20 12 4 3 NO TE • When using the remote contr ol unit, point it at the TV . 1 PO WER (ST ANDBY/ON) T o switch the power on and off. (See page 16.) 20 – 9 Set the channel.
16 W atching TV PO WER indicator Power off The TV is in standby mode. The TV is on. Off Red Green T urning on the power Press PO WER on the TV . • POWER indicator (Green): The TV is on.
17 W atching TV Using Flashbac k ( A ) on the remote contr ol unit Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the curr ently tuned channel. Press A to toggle between the currently selected input source and the pr eviously selected one.
18 W atching TV Simple b utton operation f or changing v olume/sound NO TE • Within 30 minutes after pressing e , pr ess one of the buttons below to cancel the mute. — VO L f f f f f / VO L e e e e e — e • Mute will be cancelled after 30 minutes.
19 Basic adjustment settings Menu operation b uttons Use the following buttons on the remote contr ol to operate the menu. On-Screen Displa y (Example) MENU: Press to open or close the menu screen. a / b / c / d : Press to select a desir ed item on the screen or adjust a selected item.
20 Basic adjustment settings Menu items (TV/INPUT1-3) List of menu items to help y ou with operations OPC ................................................ P age 26 Backlight ........................................ Page 27 Contrast ...................
21 Basic adjustment settings A uto installation Y ou can run auto installation again, even after setting up the preset channels. Press MENU and the MENU screen displays.
22 Basic adjustment settings Press a / b to select “Manual Adjust”, and then press ENTER . 4 Next 01 SAT.1 02 PR07 03 KABEL Programme Setup “Manual Adjust” menu Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 5 Press c / d to select “Y es”, and then press ENTER .
23 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 1 2 Press a / b to select the optimum colour system, and then press ENTER . MENU [ Setup .
24 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information will be displayed. Press a / b to select “Skip”, and then pr ess ENTER . • Skip menu displays.
25 Basic adjustment settings Erase Programme The individual programme can be erased. Erase programme men us 01 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 SAT.1 01 SAT.1 Pro7 02 KABEL 03 04 05 Next 02 Pro7 Next 01 SAT.1 03 KABEL Pro7 02 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 04 05 Next 01 SAT.
26 Basic adjustment settings OPC (Optical Picture Contr ol) setting Y ou can set the TV to automatically adjust the scr een to suitable backlight brightness according to the lighting conditions.
27 Basic adjustment settings Picture adjustments Y ou can adjust the picture to your pr eference. Follow the steps to adjust the picture. Press MENU and the MENU screen displays. 1 2 3 4 Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
28 Basic adjustment settings Colour temperature Adjusts the colour temperature to give the best white image. Press a / b to select “Colour T emp.”, and then press ENTER . Description White with bluish tone White with reddish tone Selected item High Mid-High Middle Mid-Low Low Press a / b to select the desir ed level, and then press ENTER .
29 Basic adjustment settings Press MENU and the MENU screen displays. 1 2 Press c / d to select “Pictur e”. 3 Press a / b to select “Advanced”, and then press ENTER . Monochr ome For viewing images in monochrome. Press a / b to select “Monochrome”, and then press ENTER .
30 Basic adjustment settings Press c / d to select “Audio”. Press MENU and the MENU screen displays. Press c / d to select “On”, and then press ENTER . Press a / b to select “Surround”, and then press ENTER . NO TE • Audio menu items ar e greyed out when headphones ar e in use.
31 No Signal Off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER . Press c / d to select “Enable”, and then press ENTER 3 4 • Five minutes befor e the power shuts down, remaining time displays every minute.
32 Useful adjustment settings P asswor d setting for c hild loc k (for TV input mode) Allows you to use a password to pr otect cer tain settings from being accidentally changed. Setting a passw ord Register a 4-digit password number to use the Child Lock function.
33 Useful adjustment settings Connecting external speaker s Speaker Setup Press PO WER on the top TV panel to tur n it off. Connect external speakers to the TV . 1 2 Rear view CA UTION • Make sure external speakers have 4 ohm and 15 watt specifications.
34 Useful adjustment settings Input Skip This setting allows you to skip the HDMI or DVI input on the Input Selection operation. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Input Skip”, and then press ENTER .
35 30% MENU [ Setup ... Auto Sync. ] No Yes Useful adjustment settings A uto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Auto Sync.
36 Useful adjustment settings 1 2 Image position For adjusting a pictur e’ s horizontal and ver tical position. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Centres the image by moving it to the left or right. Centres the image by moving it up or down.
37 Useful adjustment settings Wide Screen Signalling (WSS) WSS allows a television to switch automatically among the differ ent scr een formats. Press MENU and the MENU screen displays. 1 2 Press a / b to select “WSS”, and then press ENTER . 3 Press c / d to select “Setup”.
38 Press MENU and the MENU screen displays. 1 2 Press a / b to select “Standby Mode”, and then press ENTER . 3 Press c / d to select “Setup”. Press MENU and the MENU screen displays. 1 2 Press a / b to select “Reset”, and then press ENTER .
39 Useful adjustment settings 4:3 Mode set to “Normal” Selected item Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Dot by Dot Description For 4:3 “standard” pictur es.
40 Useful adjustment settings WIDE mode (f or PC input mode) Y ou can select the screen size. Press WIDE . • The WIDE MODE menu displays. 1 2 Press WIDE or a / b to select a desir ed item on the menu. NO TE • Connect the PC before making adjustments.
41 Useful adjustment settings 4 Press c / d to select “On”, and then press ENTER . Press MENU and the MENU screen displays. Press c / d to select “Option”. Press a / b to select “Audio Only”, and then press ENTER . 1 2 3 A udio Only When listening to music from a music pr ogramme, you can set the display off and enjoy audio only .
42 Colour system setting Yo u can change the colour system to one that is compatible with the image on the screen. Press MENU and the MENU screen displays. 1 2 4 3 Press c / d to select “Option”. Press a / b to select “Colour System”, and then press ENTER .
43 Displaying an e xternal equipment image Explanation here is for the setting when connecting DVD to INPUT1 terminal. Using e xternal equipment NO TE • Each time TV/VIDEO is pressed, the input sour ce toggles. • If the image does not come in clearly , you may need to change the input signal type setting on the “Input Select” menu.
44 Useful features T eletext function What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our TV r eceives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
45 Useful features Displaying Subtitle Y ou can display several subtitles as they are transmitted. Press [ to display the subtitle. • Subtitle is updated by information sent by the broadcasting station. • T o stop updating subtitle automatically , press 3 .
46 Useful features NO TE • This function does not work in INPUT 6. • When this function is not available, “No still image display available.” will display . • The still image automatically goes out after 30 minutes. 4 Press a / b to select receivable teletext broadcasting language in your country .
47 Appendix T roub leshooting Cautions regarding use in high and low temperature environments • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
48 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Control of the TV • When a programme is set, the TV can be contr olled from the PC using the RS-232C terminal.
49 Commands • Commands not indicated here ar e not guaranteed to operate. P I I I D C C I I I I I I I I I I I I A A A A A A A A POWER OFF (STANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) INPUT1.
50 Appendix Item Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function P AL: B/G, D/K, I SECAM: B/G, D/K, K/K 1 NTSC: M TV -Standard Specifications Number of dots 6,220,880 dots (1920 g 1080 g 3 dots) VHF/UHF 44.
51 Dimensional dra wings 200 800 1128 1022 576 681 853 73 99 517 360 131 125 100 200 Unit: mm LC-G7X_E-l 06.12.21, 9:06 AM 51.
52 CLEARING THE P ASSW ORD If you forget the password, clear the passwor d using the following procedure. NO TE • As a precautionary measure, make a note of your passwor d above, scissor it from this manual, and keep it in a familiar place. The P asswor d is .
FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
Printed in Japan TINS-C648WJZZ 07P01-JA-KG IMPOR T ANT NO TICE: This warr anty applies only to products sold in A ustralia & Ne w Zealand This Shar p product is warr anted against f aults in materials and manuf acture f or a period of twelv e (12) months from the date of original purchase.
デバイスSharp LC-46G7Xの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp LC-46G7Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp LC-46G7Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp LC-46G7Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp LC-46G7Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp LC-46G7Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp LC-46G7Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp LC-46G7Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp LC-46G7Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。