SharpメーカーLC-60LE635Eの使用説明書/サービス説明書
ページ先へ移動 of 76
MODEL LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S OPERA TION MANUAL LCD COLOUR TELEVISION.
ASA CE Statement: Hereby , SHARP Electronics (Eur ope) GmbH declares that the wir eless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requir ements and other relevant pr ovisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www .
1 Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV pr oduct. T o ensur e safety and many years of trouble-fr ee operation of your product, please r ead Important safety precautions car efully before using this pr oduct. Contents Intr oduction [ ENGLISH ] Introduction .
2 Introduction Important safety precautions • Cleaning—Unplug the AC cor d from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aer osol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty .
3 Introduction Caring for the front panel • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). T o protect the fr ont panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.
4 Supplied accessories Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2) Pages 6 and 8 Page 6 Stand unit ( x 1) Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) Page 5 Page 60 Ini.
5 Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cor d. • Before performing work, spread cushioning over the surface on which you will be laying the TV . This will prevent it fr om being damaged. CAUTION • Attach the stand in the correct direction.
6 Using the remote contr ol unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries.
7 TV (front/side view) Illumination LED Remote control sensor (Page 6) OPC sensor (Page 32) TV (rear view) USB 3 ( WIRELESS LAN) port USB 2 (HDD) port ETHERNET (10/100) terminal Satellite antenna term.
8 Remote control unit 6 7 5 4 3 8 9 10 12 13 14 11 2 11 6 15 17 18 19 20 21 22 23 24 1 >a (Standby/On) (Page 19) 2 AT V Access conventional analogue TV mode. DTV Access digital TV mode. SA T Access satellite mode. RADIO DTV/SA T : Switch between radio and data mode.
9 Operation overview Follow the steps below one by one when using the TV . Some steps may not be necessary depending on your TV installation and connection. 1. Preparation - Connecting the TV p q o n • Place the TV close to the AC outlet, and keep the power plug within reach.
10 3. W atch TV - Daily operation 1 T ur n on/off the TV (Page 19) • Y ou can turn on/off the power using both the remote contr ol and the TV . 2 Switch between digital, satellite and analogue broadcast (Page 19) 3 Change channels (Page 19) • Y ou can also select a channel from “Menu” > “CH list”.
11 Inserting the CA card into the CI module In order to r eceive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV . 1 Carefully insert the CI module in the CI slot with the contact side forward.
12 Quick guide Using the Menu screen Y ou need to call up the OSD to perform settings for the TV . The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments.
13 Using Softwar e keyboard Use the software keyboar d when you need to input text. Char.Set Caps Done Cancel SP Delete Clear Cursor Left Caps Char.Set Cursor Right 1 8 7 6 2 3 4 9 10 11 5 1 Char . Set Changes character set into the alphabet, numbers, symbols, etc.
14 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizar d appears. Follow the menus and make the necessary settings one after another .
15 Digital broadcast setting Press c/d to select “T errestrial” or “Cable”, and then press ; . T errestrial Cable E Searching for terr estrial broadcasts The TV searches for , sorts and stores all the receivable TV stations accor ding to their settings and the connected antenna.
16 Searching for satellite br oadcasts (635 series only) Press c/d to select “Y es”, and then press ; . Ye s No • If you do not perform “Satellite search” setting, select “No”, and then press ; . • The current DVB-S/S2 setting screen is displayed.
17 7 Press a/b to select “OK”, and then pr ess ; . After completing this setting, the screen switches to the DVB-S/S2 setting screen shown in the left column on page 16. NOTE • Follow the instructions on the screen for “2 satellites on 22kHz switchbox”, “2 satellites on toneburst switchbox”, “Max.
18 Checking signal strength and channel strength (DVB-T/T2* 1 /C/S* 2 / S2* 2 ) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good r eception while checking the antenna setup screen.
19 Daily operation T urning on/standby the power T ur ning on the power Press < on the TV or >a on the remote control unit. Standby mode Press < on the TV or TV a on the r emote control unit when TV is on. • The TV enters standby mode and the image on the screen disappears.
20 Selecting a sound mode E DTV/SA T mode If multi sound modes are r eceived, each time you press 7 the mode switches as follows. Audio (ENG) STEREO L/R LR L R CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
21 EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SA T/RADIO/DA T A, view detailed information about them and tune to an event currently on-air . Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations, select “Y es”.
22 Selecting a programme using EPG The illustrations on this page are explained using thr ee digit services. Display/Close the EPG screen Press EPG . Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE • Y ou can also display the EPG screen from “Menu” > “EPG” > “EPG”.
23 Timer setup using EPG Y ou can switch to a programme at a set time. 1 Press EPG . 2 Press a/b/c/d to select the pr ogramme you want to set, and then press ; . Back to EPG Watch No Programme info. Next 3 Press c/d to select “W atch”, and then press ; .
24 Introduction to connections The TV is equipped with the terminals as shown below . Find the cable corresponding the TV’ s terminal and connect the device. E Before connecting ... • Be sure to turn off the TV and any devices before making any connections.
25 Video connections HDMI connection Example of connectable devices E DVD player/recor der E Blu-ray player/recor der E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/r ecorder .
26 Connecting external devices SCART connection YP B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recor der n SCART cable (commercially available) NOTE .
27 VIDEO connection Example of connectable devices E VCR E DVD player/recor der E Game console E Camcorder Y ou can use the EXT 2 terminal when connecting to a game console, camcorder , a DVD player/recor der or other device.
28 Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD player/recorder , Blu-ray player/recor der) using a single remote contr ol unit.
29 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recor der that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the A.
30 AQUOS LINK setup Basic operation Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled.
31 T op menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recor der . 1 Press a/b to select “T op menu/title list”, and then press ; . • The linked recorder now powers on and the TV automatically selects the appropriate external input source.
32 Picture settings Go to “Menu” > “Setup” > “Picture”. Setup A V mode Picture OPC [Off] CH list :Back :Enter Menu Backlight Contrast Picture A V mode “A V mode” gives you severa.
33 Picture Advanced This TV provides various advanced functions for optimising the picture quality . Go to “Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system.
34 Audio settings Go to “Menu” > “Setup” > “Audio”. Setup Bass Auto volume Audio T reble [Off] ST ANDARD CH list :Back :Enter Menu Balance L30 R30 Audio Auto volume Differ ent sound sources sometimes do not have the same volume level, such as a programme and its commercial br eaks.
35 Power save settings Go to “Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [O.
36 View settings Go to “Menu” > “Setup” > “View setting” Setup Quick start Auto installation View setting Channel settings CH list :Back :Enter Menu Individual setting View setting Auto installation The TV automatically detects and stores all available services in your area.
37 Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or r emote control unit.
38 Analogue setting Y ou can reconfigur e the analogue TV channels settings automatically or manually . E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed.
39 TV start-up time setting View setting Quick start Y ou can reduce the TV’ s start-up time after tur ning on the power with the remote contr ol unit. Go to “Menu” > “Setup” > “View setting” > “Quick start”. Item On The TV quickly starts up from standby .
40 Individual setting - Language View setting Digital audio language Set up to three pr eferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
41 Optional features settings Go to “Menu” > “Setup” > “Option”. Option for view EPG setup AQUOS LINK setup T erminal setting Setup Option CH list :Back :Enter Menu Selecting the picture size manually Option Wide mode Y ou can select the picture size.
42 Selecting the WSS picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal Normal range keeping 4:3 or 16:9 aspect ratio.
43 Input source settings Option Input select For setting the signal type of external equipment. 1 Press b to select the input sour ce for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ; . 2 Go to “Menu” > “Setup” > “Option” > “T erminal setting” > “Input select”.
44 Screen ef fect settings Option Channel selecting effect This function shows a screen ef fect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting ef fect”.
45 Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “Menu” > “Setup” > “Option” > “Illumination”. Item Off The LED is not illuminated. Standby The LED is illuminated while the TV is in standby mode.
46 Using a USB device The TV provides you some functions using a USB device. Y ou can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function.
47 Time shift This function enables you to pause the digital TV or satellite programme you ar e watching and start watching it again from the paused scene. 1 Press READY . • The TV starts temporary recording of the r eal time broadcast in the backgr ound.
48 Examples of time shift usage When you move away from the TV for a while (press READY when you move away fr om the TV) Without time shift Away Y ou miss the scene while you are away . With time shift Awa y Y ou can watch the missed scene when you come back.
49 Option Device registration Y ou need to perform this function to register the USB storage device for the time shift. Go to “Menu” > “Setup” > “Option” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 46) for registering a USB storage device.
50 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory , USB card reader (Mass Storage Class), USB HDD) or Home network server . NOTE • T o connect a Home network server , refer to Network setup (Page 59).
51 Viewing enlarged photos Buttons for enlarged photo display operation (When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory . 6 Return to the thumbnail selection screen. R button Rotate the photo by 90 degrees to the left.
52 Music mode * This screen image is for the USB media mode. It may be slightly differ ent in the Home network mode. Buttons for music mode (When using USB media mode) Buttons Description ; When selecting a music file: Play music. a/b/c/d (Cursor) Select a desired item.
53 View setting DivX® setup This is the function to confirm your registration code. Y ou need to register the code at www .divx.com. Go to “Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration Y ou can find your registration code on this menu.
54 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminal HDMI-certified cable (commercially available) PC HDMI 2 terminal* ø 3.5 mm stereo minijack cable (commercially available) .
55 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc.
56 PC compatibility chart Resolution Horizontal frequency V ertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔✔✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔✔✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔✔✔ WXGA 1,360 x 768 47.
57 PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP . The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
58 Command list CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (ST ANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANN.
59 Connecting to the network T o enjoy inter net services, you need to connect the TV to a router with a high speed connection to the internet. Y ou can also connect the TV to your Home network server through a r outer or access point. The TV connection to the router can either be wir ed or wireless.
60 Wireless installation Use the wireless LAN USB adapter supplied with the TV . E Wireless connection overview PC Wireless LAN router/access point Wireless LAN USB adapter (supplied) Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much fr ee space around the device for best performance.
61 What is Net TV? Net TV offers internet service and websites tailored for your TV . Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie fr om a video store* and much more.
62 Net TV E Reload Refreshes the page you ar e browsing. If an err or occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ; . E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 400 : Adjust END :Exit 1 Select “Zoom”, and then press ; .
63 Disclaimers and software licences for Net TV DISCLAIMERS • • • • • • This product includes the Opera™ browser . • This product contains fonts provided by Monotype Imaging Inc.
64 Appendix T roubleshooting Problem Possible solution • No power . • Is the AC cord disconnected? • Check if you pressed < on the TV . • The TV cannot be operated. • Exter nal influences such as lightning, static electricity , etc., may cause improper operation.
65 Updating your TV via DVB-T/T2* Ensure that your TV softwar e version is always up to date. From time to time SHARP will make updated TV base software and DVB softwar e available.
66 Information on the software licence for this product Information Software licence Y ou can read the softwar e licences in this menu. Go to “Menu” > “Setup” > “Information” > “Software licence”.
67 W ar ning regar ding basic use Cautions regar ding use in high and low temperature envir onments • When the TV is used in a low temperature space (e.g., room, of fice), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperatur e returns to normal.
68 Appendix Specifications Item LCD COLOUR TV (60 o /152 cm), LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S LCD panel 152 cm (60 o ) X-Gen panel Resolution 1,920 x 1,080 x 3 dots Video colour system P AL/SECAM/NTSC 3.
69 Specifications (Wireless LAN USB adapter) Product name Dual Band 802.11n USB2.0 adapter Standard IEEE 802.11a/b/g/n Host interface USB2.0 Frequency band 2412 _ 2484 MHz 5150 _ 5850 MHz Security Static WEP (64/128 bit, key index 1 only) WP A-PSK (TKIP) WP A2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.
70 Environmental specifications Item I On-Mode (W) (HOME MODE) 101 W J Energy-Save-Mode (W) Advanced 75 W K Standby-Mode (W) 0.1 W L Annual Energy Consumption (kWh) 147 kWh M Annual Energy Consumptioning Energy-Save-Mode (kWh) Advanced 110 kWh I Measured accor ding to IEC 62087 Ed.
71 Rating table for child lock User -adjusted rating Broadcasted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ —————————————— Parental approval pr ef.
72 Appendix Dimensional drawings LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S (1329.12) *1 (1329,12) *1 (872) (839) (1383) (747.63) *1 (747,63) *1 (536) (470) (400) (52) (215) (230) (400) (149) (333) (72.0) (72,0) (26.4) (26,4) *2 I Active area J Thinnest part NOTE • Dimensions do not include protrusions such as screws and some parts.
73 Appendix EU Energy Label for T elevisions On 30 November , 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regar d to ener gy labelling of televisions. The Regulation entered into for ce on 20 December 2010 and applies in all Member States.
SHARPe SHARP ELECTRONICS (Europe) GmbH SonninstraBe 3, D-20097 Hamburg SHARP CORPORATION http://www.sharp-eu.com 11 P09-PL-NG.
デバイスSharp LC-60LE635Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp LC-60LE635Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp LC-60LE635Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp LC-60LE635Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp LC-60LE635Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp LC-60LE635Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp LC-60LE635Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp LC-60LE635Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp LC-60LE635Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。