SharpメーカーNotevision XG-C435X-Lの使用説明書/サービス説明書
ページ先へ移動 of 73
DA TA PR OJECT OR MODEL XG-C465X-L XG-C435X-L OPERA TION MANU AL Introduction Quic k Start Setup Connections Basic Operation Useful Features Appendix.
IMPOR T ANT • For your assistance in reporting the loss or theft of your Projector , please recor d the Model and Serial Numbers located on the bottom of the projector and r etain this information.
-1 Introduction Before using the pr ojector , please read this operation man ual carefully . There ar e two important reasons for prompt warranty r egistration of your new SHARP Projector , using the REGISTRA TION CARD packed with the projector .
-2 PR ODUCT DISPOSAL This product utilizes tin-lead solder , and lamp containing a small amount of mercury . Disposal of these materials may be r egulated due to environmental considerations. For disposal or recycling information, please contact your local authorities, the Electr onics Industries Alliance: www .
-3 Introduction -43 Useful Features Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”. • This operation can also be performed by using the b uttons on the projector.
-4 Contents Preparing Useful Features Menu Items ................................................... 40 Using the Menu Screen ............................... 43 Menu Selections (Adjustments) ......................... 43 Picture Adjustment (“Picture” menu) .
-5 Introduction Reference Appendix Maintenance ................................................. 56 Replacing the Air Filter ................................ 57 Replacing the Air Filter ...................................... 57 Maintenance Indicators .
-6 PDF operation manuals in several languages are included in the CD-ROM, so that you can w ork with the pr ojector . T o utilize these manuals, you need to install Adobe ® Reader ® on your computer (Windows ® or Macintosh ® ). Please download Adobe ® Reader ® from the Inter net ( http://www .
-7 Introduction 1. Read Instructions All the safety and operating instructions should be read befor e the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future r eference. 3. Heed Warnings All warnings on the product and in the operating instructions should be adhered to.
-8 Ensur e that you read the following safeguar ds when setting up your pr ojector . Caution concerning the lamp unit ■ Potential hazard of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Shar p A uthorized Pro- jector Dealer or Service Cen- ter for replacement.
-9 Introduction Caution regarding usage of the projector ■ When using the projector , t a ke care not to sub- ject it to hard impact and/or vibration, as this can result in damage.
-10 Accessories Remote control <RRMCGA623WJSA> Tw o R-6 batteries (“AA” size , UM/SUM-3, HP-7 or similar) Po wer cord * F or U .S., Canada, etc. (6' (1.8 m)) <QA CCDA007WJPZ> F or Europe , except U .K. (6' (1.8 m)) <QA CCV A011WJPZ> * Which pow er cords are supplied along with your projector depends on the region.
-11 Introduction Optional lenses ■ Lens Projection distance for 100" screen size Wide-zoom lens ( × 1.5 – 1.9) AN-C12MZ 9'11" – 12'5" (3.0 m – 3.8 m) T ele-zoom lens ( × 2.2 – 2.8) AN-C18MZ 14'10" – 18'10" (4.
-12 43 MENU button For displaying adjustment and setting screens. 44 35 AUTO SYNC button For automatically adjusting images when connected to a computer. ENTER button For setting items selected or adjusted on the menu. 32 KEYSTONE button For entering the Keystone Correction mode.
-13 Introduction Projector (Rear View) * Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector .
-14 Remote Control 30 ST ANDBY button For putting the projector into standby mode . 32 KEYST ONE button For entering the K eystone Correction mode. 35 FREEZE button For freezing images . 36 MA GNIFY (Enlarge/Reduce) buttons For enlarging/reducing part of the image.
-15 Introduction Using the Remote Control Inserting the Batteries 1 Pull down the tab on the cover and remove the cover towards the di- rection of the arr ow . 2 Insert the batteries. • Insert the batteries making sure the po- larities correctly match the and marks inside the battery compartment.
-16 Quick Start 7 ST ANDBY button 3 ON button 6 COMPUTER 1 button 37 ST ANDBY/ON button 6 INPUT buttons 6 ENTER button 4 Height Adjustment buttons 5 Zoom knob 5 F ocus r ing 4 Tilt dial Page 18 1.
-17 Quic k Star t Pag es 31, 32 4. Adjust the angle 5. Adjust the focus and the zoom 7. Tu rn the Power off Pag e 3 0 6. Select the INPUT mode Pag e 3 4 • • • • • This projector is equipped with an “Auto V -Ke ystone Correction” function that automatically corrects any trapezoidal distortion within the projected image.
-18 Setting Up the Projector For optimal image quality , position the projector perpendicular to the screen with the pr ojector’ s feet flat and level. Doing so will eliminate the need f or Keystone correction and pr ovide the best image quality . (See page 32 .
-19 Setup Projection (PRJ) Mode The projector can use an y of the 4 projection modes, shown in the diagram belo w. Select the mode most appro- priate for the pr ojection setting in use. (Y ou can set the PRJ mode in “ SCR-ADJ” men u. See page 50 .
-20 Standard Zoom Lens F1.7-F1.9, f=28.0-33.6 mm Setting Up the Pr ojector Note • Allow a margin of error in the v alue in the diagrams abov e. • When the distance from the lens center to the bottom of the image [H] is a negativ e number , this indicates that the bottom of the image is below the lens center .
-21 Connections Samples of Cables f or Connection •F or more details of connection and cables, ref er to the operation man ual of the connecting equipment.
-22 T erminal on the projector A UDIO (f or COMPUTER/ COMPONENT 1, 2, D VI-D) A UDIO (f or VIDEO, S-VIDEO) MONIT OR OUTPUT A UDIO (MONIT OR OUT) Equipment A udio-visual equipment Monitor Amplifier T e.
-23 Connections Connecting to a Computer Bef ore connecting, ensure the power cord of the pr ojector fr om the A C outlet is unplugged, and that the devices to be connected are turned off . After making all connections, turn on the projector and then the other de vices.
-24 When connecting with a D VI digital cable The projector emplo ys the D VI digital input ter minal f or direct input of Digital Video signals from a computer . * When using the ø3.5 mm mono audio cable , the volume le v el will be half of when using the ø3.
-25 Connections Connecting to Video Equipment The image quality is highest in order of the Component signal, the RGB signal, the S-video signal and the Video signal. If y our audio-visual equipment has a component output terminal or RGB output ter minal, use the COMPUTER/COMPONENT terminal 1 or 2 on the projector for video connection.
-26 When connecting video equipment with S-video output terminal When connecting video equipment with video output terminal Note • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector , use a com- mercially av ailable cab le that fits in the projector terminal you want to connect.
-27 Connections Contr olling the Pr ojector b y a Computer When the RS-232C terminal on the projector is connected to a computer , the computer can be used to control the projector and chec k the status of the projector . Refer to the “SETUP MANU AL ” contained on the supplied CD-ROM f or “RS-232C Specifications and Commands”.
-28 To RGB input terminal RGB cable (commercially available) RGB cable To RGB output terminal To COMPUTER/ COMPONENT 1 input terminal To MONITOR OUT terminal Monitor Computer When connecting to the LAN terminal using a LAN cable Note • When connecting to hub , use straight-through Category 5 (CA T .
-29 Connections A udio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment. Note • Tu rn off the po wer of both the projector and audio equipment when connecting.
-30 AC socket To AC outlet T urning the Projector On/Off Info • When “A uto Restart” is set to “On”: If the power cord is unplugged fr om the outlet or the breaker switch is turned of f when the projector is on, then the projector automatically turns on when the power cor d is plugged into the AC outlet or the breaker switch is turned on.
-31 Basic Operation Image Projection Height Adjustment button Side View Lens center T op View Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the pr ojector , the screen is inclined or when the installation site is slightly inclined.
-32 Image Projection END TESTP A TTERN ADJUST RESET H&V KEYST ONE H: 0 V : 0 " On-screen Display (Keystone Correction mode) KEYSTONE button MOUSE/Adjustment buttons ( ' / " / / | ) RETURN button Note • Press RETURN to return to the default set- ting.
-33 Basic Operation Adjusting the Lens The image is focused and adjusted to the screen size using the focus ring or zoom knob on the projector . 1 The focus is adjusted by rotat- ing the focus ring.
-34 Image Projection COMPUTER 1, COMPUTER 2, D VI, S-VIDEO , VIDEO buttons V OL +/– (V olume) buttons AV MUTE button Switching the Input Mode Select the appropriate input mode for the con- nected equipment. Press COMPUTER1/2 , DVI , S-VIDEO or VIDEO on the remote control to se- lect the input mode.
-35 Basic Operation Displaying and Setting the Break Timer 1 Press BREAK TIMER . • The timer starts to count down from 5 min- utes. On-screen display 2 Press ' / " / / | to adjust the length of the break time.
-36 Selecting the Picture Mode Y ou can select the appropriate picture mode f or the pr ojected image , such as mo vie or video game. Press PICTURE MODE . • When pressing PICTURE MODE , the picture mode changes in the following order: STANDARD PRESENTATION MOVIE GAME sRGB Note • See page 45 for details on the picture mode.
-37 Basic Operation Resize Mode This function allows y ou to modify or customize the resize mode to enhance the input image. De- pending on the input signal, y ou can choose a desired image.
-38 VIDEO/DTV Image Projection About Copyrights • When using the RESIZE function to select an image size with a diff erent aspect ratio to a TV program or video image, the image will look diff erent from its original appearance. K eep this in mind while choosing an image size.
-39 Basic Operation Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse.
-40 Menu Items The follo wing shows the items that can be set in the pr ojector . “Picture” menu +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 Tint Color Reset Sharp Bright +30 -30 Contrast Red .
-41 Useful Features “Screen adjustment (SCR-ADJ)” menu On Off On Off Main Menu Sub Menu OSD Display Background Logo Blue None Normal Full Dot By Dot Area Zoom V-Stretch Border Stretch Center Upper.
-42 “Network” menu “Projector adjustment (PRJ-ADJ)” menu Main Menu Network Page 54 On Off IP Address Subnet Mask Gateway Page 54 TCP/IP Page 55 DHCP Client Page 55 Page 55 Password Old Passwor.
-43 Useful Features Using the Men u Screen Menu Selections (Adjustments) Example: Adjusting “Bright”. • This operation can also be perf ormed by using the buttons on the projector .
-44 3 Press ' ' ' ' ' or " " " " " and select “Bright” to adjust. • The selected item is highlighted. To adjust the pro- jected image while watching it Press ENTER . • The selected item (e.g. “Bright”) is dis- played by itself at the bottom of the screen.
-45 Useful Features Menu operation Page 43 1 1 1 1 1 Selecting the Picture Mode Picture Adjustment (“Picture” men u) • “sRGB” is displayed only when RGB signal is input. • Y ou can set or adjust each item in the “Picture” menu to y our preference .
-46 4 4 4 4 4 Selecting the Progressive Mode 5 5 5 5 5 Selecting the Film Mode This function provides high-quality playback of images originally projected at 24 fps, such as movies on DVDs. Description Films are detected automatically . Films are not detected.
-47 Useful Features 0 0 0 0 Phase Clock Pict. SIG – ADJ SCR PRJ Net. H-Pos V-Pos Reset Auto 640 x 480 On Standard Auto SEL./ADJ. RETURN ENTER END Resolution Auto Sync Signal Type Dynamic Range Video System Signal Info : 800 x 600 H 60.
-48 Menu operation Page 43 7 7 7 7 7 Checking the Input Signal This function allows you to check the current in- put signal information. Note • The Video signal can only be set in VIDEO or S-VIDEO mode. • When “Video System” is set to “A uto”, you ma y not receiv e a clear picture due to signal differ- ences.
-49 Useful Features Resize 0 0 0 Image Shift H-Keystone V-Keystone Auto V-Keystone Center On On Normal Logo Front English SEL./ADJ. RETURN ENTER END OSD Display Background Menu Position PRJ Mode Language Pict.
-50 Menu operation Page 43 Selectable items Logo Blue None Description SHARP default image Blue screen Black screen 5 5 5 5 5 Selecting a Startup and Background Image Description Displa yed on the center of the image . Displayed on the upper right of the image.
-51 Useful Features Auto Power Off Auto Restart System Sound Speaker Audio Out 9600bps Enable On On On FAO On Enable Normal Disable SEL./ADJ. RETURN ENTER END Monitor Out LAN/RS232C RS-232C Fan Mode System Lock All reset Lamp Timer (Life) [ 0]h [ 0] min ( 100%) Pict.
-52 Helpful Functions Set during Installation (“PRJ-ADJ” menu) Menu operation Page 43 Setting/Changing the keycode 1 Select “System Lock”, then press ENTER or | | | | | . 2 Select “Next”, then press ENTER . • The screen for entering the keycode appears.
-53 Useful Features Menu operation Page 43 5 Enter the same keycode in “Reconfirm”. Note To cancel the keycode that you ha ve al- ready set • Press " on the projector for four times in steps 4 and 5 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on.
-54 Setting up the Projector Network Environment (“Network” menu) 1 1 1 1 1 Setting a Password If you do not want others to change the setting for the “Network” menu, set a password. Setting a Password 1 Select “P assw ord”, then press | | | | | .
-55 Useful Features 2 2 2 2 2 DHCP Client Setting Connect the LAN cable before turning the pro- jector on. If not, the DHCP Client function does not work. Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears.
-56 Cleaning the lens ■ Use a commercially available blower or lens clean- ing paper (for glasses and camera lenses) for clean- ing the lens. Do not use any liquid type cleaning agents, as the y may w ear off the coating film on the surface of the lens.
-57 Appendix Replacing the Air Filter • This projector is equipped with air filters to ensure the optimal operating condition of the projector . • Ask your nearest Sharp A uthoriz ed Pr o- jector Dealer or Service Center to ex- c hange the filter (PFILD A022WJKZ) when it is no longer possible to clean.
-58 5 Place a replacement air filter . • Place the new air filter onto the filter co v er . 6 Replace the filter co ver . • Slide the filter cover in the direction of the arrow to close it. Note • Ensure the filter cov er is securely installed. The power will not turn on unless it is correctly in- stalled.
-59 Appendix Po w er indicator Lamp indicator T emperature warning indicator Maintenance Indicators Maintenance Indicators ■ The warning lights on the projector indicate pr oblems inside the pr ojector .
-60 Maintenance indicator Problem Cause P ossible solution T emperature warning indicator Normal Abnormal Off Red on (Standby) The internal temperature is abnormally high. Abnormal • Blocked air intake • Relocate the projector to an area with proper ventilation (see page 8 ).
-61 Appendix Lamp ■ It is recommended that the lamp unit (optional: AN-C430LP) be replaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality . The lamp life (per centage) can be checked with the on-screen displa y .
-62 Regarding the Lamp Securing screws Optional accessory Lamp unit AN-C430LP Removing and Installing the Lamp Unit W arning! • Do not remov e the lamp unit from the pro- jector right after use. The lamp and par ts around the lamp will be v er y hot and may cause burn or injur y .
-63 Appendix User service screw (for lamp unit cover) AC socket 5 Inser t the new lamp unit. • Press the lamp unit firmly into the lamp unit compar tment. F asten the secur ing screws . 6 Replace the lamp unit cover . • Align the lamp unit cov er and slide it to close.
-64 Storing the Pr ojector Lens cap Fixing band Info How to Use the Storage Case When storing the projector , attac h the lens cap to the lens, and place it in the supplied storage case. 1 Open the cover of the stora ge case . 2 Place the pr ojector into the stor- ag e case .
-65 Appendix Note • This projector ma y not be able to displa y images from notebook computers in simultaneous (CR T/LCD) mode. Should this occur , tur n off the LCD display on the notebook computer and output the displa y data in “CRT only” mode.
-66 Tr oubleshooting Check • Projector pow er cord is not plugged into the wall outlet. • Po w er to the external connected devices is off . • The selected input mode is wrong. • The A V MUTE function is working. • Cables incorrectly connected to the rear panel of the projector .
-67 Appendix Check Problem P age An unusual sound is occasionally heard from the cabinet. Maintenance indicator illuminates or b links in red. The projector cannot be turned on or put into the standby mode using the ST ANDBY/ON b utton on the projector .
-68 For SHARP Assistance If y ou encounter any pr oblems during setup or operation of this pr ojector , first refer to the “T roubleshooting” section on pages 66 and 67 . If this operation manual does not answer y our question, please contact the SHARP Service depar tments listed belo w .
-69 Appendix Specifications As a par t of policy of continuous improv ement, SHARP reser ves the right to mak e design and specification changes f or product improv ement without prior notice. The perf or mance specification figures indicated are nominal v alues of production units.
-70 2D Progressiv e ......................................................... 4 6 3D Progressiv e ......................................................... 4 6 AC socket ................................................................. 3 0 Adjustment buttons .
SHARP CORPORA TION.
デバイスSharp Notevision XG-C435X-Lの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sharp Notevision XG-C435X-Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp Notevision XG-C435X-Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp Notevision XG-C435X-Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp Notevision XG-C435X-Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp Notevision XG-C435X-Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp Notevision XG-C435X-Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp Notevision XG-C435X-Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp Notevision XG-C435X-Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
