SharpメーカーTU-37GAXの使用説明書/サービス説明書
ページ先へ移動 of 77
LCD COLOUR TELEVISION OPERA TION MANU AL 32 o DISPLA Y A VC SYSTEM LC-32G2X/ TU-32GAX 37 o DISPLAY AVC SYSTEM LC-37G2X/ TU-37GAX Printed in Japan TINS-B308WJZZ 04P06-JKG IMPOR T ANT NO TICE: This warr.
1 LCD COLOUR TELEVISION OPERA TION MANU AL Contents …………………………………………………… 1 Dear SHARP customer …………………………………… 3 Important Safety Pre.
2 Contents Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
3 Impor tant Safety Precautions Electricity is used to perfor m many useful functions, but it can also cause personal injuries and pr operty damage if improperly handled. This pr oduct has been engineered and manufactured with the highest priority on safety .
4 Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Stand—Do not place the product on an unstable cart, stand, tripod or table.
5 Supplied accessories Make sure the following accessories ar e provided with the product. A VC System: TU-32GAX/TU-37GAX Remote control unit ( g 1) Page 14 “AAA” size battery ( g 2) Page 14 Syste.
6 Supplied accessories Make sure the following accessories ar e provided with the product. Cable clamp ( g 1) Page 10 Page 9 AC cord ( g 1) Bracket unit ( g 1) Page 7 Left speaker Page 7 Speaker unit ( g 1) Right speaker Page 7 Display: LC-32G2X Cable clamp ( g 1) Page 10 Page 9 AC cord ( g 1) • Speakers are attached when shipping LC-32G2X.
7 Attaching speaker s Preparation 1 2 3 6 5 4 7 8 Peel off the tape holding the ends of the cables, and move cables towards behind the display . T ur n the speaker to the fr ont of the Display (direction of the arr ow) and fit it to the screw hole. Fasten the screws.
8 Where to place the System “System” means the Display and A VC System. First select the location where to place the System. 1 2 Selecting the location of the System • Select a place with no direct sunlight and good ventilation. • The Display and the A VC System ar e connected by the system cable.
9 System cable A VC System (rear view) AC cord Display (rear vie w) AC cord System cable (GREY) Connect the plug firmly until the hooks on both sides click.
10 Preparation 4 5 Attaching the c lamp and b undling the cables with the c lamp Closing the terminal cover Cable c lamp Insert the cable clamp in the hole on the Display as shown. Display (rear vie w) Cables come out fr om the small opening. LC-32/37G2X-a 04.
11 Preparation Setting the A VC System with the stand 1 How to install the A VC System vertically using the stand unit. • Use the supplied stand unit for installing the A VC System ver tically in an upright position. Stick eac h spacer to the stand as shown.
12 Removing speaker s Preparation 1 2 3 5 4 LC-32G2X NO TE • Perfor m the same steps for right speaker . • T o attach the speakers, perform the steps in reverse order . Unfasten the screw used to secur e the speaker bracket. T ake off the speaker cable cover .
13 Preparation Removing the stand Before detaching (or attaching) stand, unplug the AC cor d from the AC input and the system cable from the Display . CA UTION • Do not remove the stand fr om the Display unless using an optional wall mount brac ket to mount it.
14 1 Open the battery cover . 2 Insert two supplied “AA A” size batteries. • Place batteries with their ter minals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion.
15 Preparation Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Simple operations for watching a TV programme Basic connection Connecting to an antenna T o enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
16 P ar t names POWER indicator MAIN POWER button OPC sensor* Displa y POWER button TV/VIDEO button VOLUME buttons (VOL l / k ) CHANNEL buttons (CH s / r ) Remote control sensor *OPC: Optical Picture Contr ol (See page 30.
17 * Press RESET if the system cannot r etur n to its original state after perfor ming various operations. This will reset the System as shown below . • A V MODE r esets to USER. • TV channel resets to channel 1. • Dual screen r esets to nor mal.
18 P art names 12 7 9 10 8 3 4 5 12 19 15 16 17 18 20 21 22 13 11 23 24 14 26 27 25 6 NO TE • When using the r emote control unit, point it at the Display . Remote contr ol unit 1 PO WER (ST ANDBY/ON) T o switch the power on and off. (See page 19.) 2 OPC T o switch the Optical Picture Control on and off.
19 Display A VC System T urning on the power Make sure that the system cable is connected befor e tur ning on the power . POWER indicator PO WER button MAIN PO WER button POWER indicator PO WER button 1 2 T urning off the power Press PO WER on the r emote control unit.
20 W atching TV Simple b utton operations f or changing c hannels Y ou can change channels in several ways. Using CH r / s on the remote contr ol unit • Press CH r to incr ease channel number . • Press CH s to decrease channel number . NO TE • CH s / r on the Display operates the same as CH s / r on the remote contr ol unit.
21 W atching TV Using MPX on the remote contr ol unit In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between NICAM STEREO and MONO. In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between STEREO and MONO.
22 W atching TV Simple b utton operation f or changing v olume/sound Changing the v olume Y ou can change the volume on the Display or on the remote contr ol unit. NO TE • “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5” and “CARD” modes can each store volume adjustment values separately .
23 Basic adjustment settings Menu operation b uttons Use the following buttons on the remote contr ol to operate the menu. On-Screen Displa y Example MENU: Press to open or close the menu screen. a / b / c / d : Press to select a desir ed item on the screen or adjust a selected item.
24 Basic adjustment settings TV/A V input mode menu items List of TV/A V men u items to help y ou with operations OPC ................................................ P age 30 Backlight ........................................ P age 31 Contrast ......
25 Basic adjustment settings A uto installation Y ou can run auto installation again, even after setting up the preset channels. Press MENU and the MENU screen displays.
26 Basic adjustment settings Press a / b to select “Manual Adjust”, and then press ENTER . 4 Next 01 SAT.1 02 PR07 03 KABEL Programme Setup “Manual Adjust” menu Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 5 Press c / d to select “Y es”, and then press ENTER .
27 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 1 2 Press a / b to select the optimum colour system, and then press ENTER . MENU [ Setup .
28 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Skip”, and then pr ess ENTER . • Skip menu displays. 1 2 MENU [ Setup .
29 Basic adjustment settings Sort menus Sort Channel positions can be sorted freely . 01 06 SAT.1 KABEL 01 SAT.1 02 03 04 05 Next 01 SAT.1 02 KABEL Next 01 SAT.1 KABEL 02 01 KABEL Next 01 KABEL SAT.1 02 Press MENU and the MENU screen displays. Press c / d to select “Setup”.
30 Basic adjustment settings Language setting f or on-screen displa y Y ou can also select a language from setup menu. Select from among 3 languages: English, Chinese and Arabic. 3 Press MENU and the MENU screen displays. 1 2 4 Press c / d to select “Setup”.
31 Basic adjustment settings Picture adjustments Adjust the picture to your pr eference with the following picture settings. Press MENU and the MENU screen displays. 1 2 3 4 Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
32 Basic adjustment settings C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Pictur e”. 3 Press a / b to select “Advanced”, and then press ENTER .
33 Monochr ome For viewing a video in monochrome. Press a / b to select “Monochr ome”, and then press ENTER . Press c / d to select “On”, and then press ENTER . Repeat steps 1 to 3 in 3D-Y/C . 1 2 3 Basic adjustment settings 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise.
34 A udio adjustment Y ou can adjust the sound quality to your prefer ence with the following settings. Press c / d to select “Audio”. Press a / b to select a specific adjustment item.
35 Basic adjustment settings No Signal off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER .
36 Impor tant notes on using memory car ds • Sharp cannot be held r esponsible for misuse of the LCD TV set, any troubles during use, or other pr oblems, or any damages arising out of the use of the LCD TV set, except for those cases for which Sharp is liable by law .
37 Using memory card Y ou can use memory cards (commercially available) for recor ding and playing back pictures. • Please use an appr opriate PC card adapter (commercially available) for each memory car d. • Following memory cards ar e available.
38 Using memory card Car d Setup mode men u items Card Still Setup Slide Show Setup Edit Video Setup Format Audio Select My Programme Rec. Mode Repeat Pre-r ecording Y es/No Edit Interval Repeat Order.
39 Using memory card Recording a still ima ge Y ou can recor d a still image on the car d. Press E REC . 1 2 Press FREEZE . 3 Press ENTER to update the still image. Onion Tomato Potato x 1 x 1 x 1 Still Cooking Time Onion Tomato Potato x 1 x 1 x 1 Cooking Time Still Still image was captured on a card.
40 Using memory card Setting Slide Show Y ou can adjust the interval, order and r epeat settings. 5 6 Press a / b to select “Slide Show Setup” and then press ENTER . Press MENU and the MENU screen displays. 2 3 Press c / d to select “Car d”. 4 Press a / b to select “Still Setup”, and then press ENTER .
41 Using memory card A udio Select Y ou can enjoy the audio from TV or other external equipment during the still image playback. 2 3 Press a / b to select “Audio Select”, and then press ENTER .
42 Using memory card Deleting all still image files 2 Press c / d to select “Y es”, and then press ENTER . Deleting a still image file 5 6 Press a / b to select “Edit”, and then press ENTER . Press MENU and the MENU screen displays. 2 3 Press c / d to select “Car d”.
43 Using memory card Recording a motion picture Use this setting to recor d images you are currently watching. Record with the settings made in “Rec. Mode” and “Pre-r ecording”. Press E REC to start recor ding. • CARD indicator lights up red.
44 Using memory card Protecting/unpr otecting motion picture files Y ou can protect any file you do not want to delete. 2 3 Press a / b to select “Edit”, and then press ENTER . Rec. Mode Protect Delete File Delete All Pre-recording Repeat Edit Press a / b to select “Protect”, and then press ENTER .
45 Using memory card Deleting all motion picture files 6 Press a / b to select “Delete All”, and then press ENTER . 7 Deleting a motion picture file 5 6 Press a / b to select “Edit”, and then press ENTER . Press MENU and the MENU screen displays.
46 Using e xternal equipment CA UTION • T o protect all equipment, always turn off the A VC System before connecting to an HDTV tuner , VCR, DVD player , PC, game console, camcorder or other external equipment. NO TE • See pages 47 to 49 for external equipment connection.
47 Using external equipment A VC System (rear view) HDTV tuner A V cable (commercially available) Connecting an HDTV tuner Y ou can use the INPUT 1 terminal when connecting an HDTV tuner and other audiovisual equipment.
48 Using external equipment A VC System (rear view) D VD player Component cable (commercially available) A V cable (commercially available) Connecting a D VD player Y ou can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.
49 Using external equipment NO TE • Macintosh adaptor may be requir ed for use for some Macintosh computers. • When connecting to a PC, the correct input signal type is automatically detected. (See page 57.) If the PC image does not come in clearly , you may need to set the Auto Sync.
50 Rear view Using external equipment Connecting external speaker s CA UTION • Make sure external speakers have 4 ohm and 10 watt specifications. • Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short. How to connect the speaker cable Push down the tab .
51 Useful adjustment settings 1 2 Image position (f or T V/A V input mode) For adjusting a picture’ s horizontal and vertical position. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Description Centres the image by moving it to the left or right.
52 Useful adjustment settings Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the pictur e as necessary to change image position using Auto Sync. In some cases, however , manual adjustment is needed to optimise the image. 1 2 Press MENU and the MENU screen displays.
53 Useful adjustment settings Input Label Y ou can assign each input source a label you like. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Input Label”, and then press ENTER . 6 Repeat the above until the name is fully spelt out, and then press ENTER .
54 Useful adjustment settings A V mode selection A V mode gives you five viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of pr ogramme watched or the type of image input fr om external equipment.
55 Useful adjustment settings 4:3 Mode set to “Normal” 4:3 Mode set to “Panorama” Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Selected item Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Description For 4:3 “standard” pictur es.
56 Useful adjustment settings WIDE MODE Normal Cinema Full Dot by Dot Input signal (640 m 480) Input signal (1024 m 768) WIDE mode (f or PC input mode) Y ou can select the screen size. a Press WIDE . • The WIDE MODE menu displays. 1 2 Press WIDE or a / b to select a desired item on the menu.
57 3 4 Useful adjustment settings Input signal (PC input mode onl y) • Some input signals may have to be register ed manually to display properly . • The pairs of input signals (r esolutions) in the list below are not distinguishable when r eceived.
58 Useful adjustment settings Rotate Y ou can set the orientation of the picture. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Setup”. Press a / b to select “Rotate”, and then pr ess ENTER . 3 [Normal]: nor mal image. [Mirror]: mirr or image.
59 Useful adjustment settings A udio out Allows you to select what contr ols the audio output. NO TE • This setting is available only in TV input mode. Press MENU and the MENU screen displays. 1 2 Press a / b to select “Audio Out”, and then press ENTER .
60 P assw ord setting f or child loc k (for TV input mode) Allows you to use a password to pr otect cer tain settings from being accidentally changed. Setting a passw ord (Changing a pass wor d) Register a 4-digit password number to use the Child Lock function.
61 Useful adjustment settings Centre Channel Input Y ou can use the speaker as the centre speaker when using a 5.1ch surr ound system. 4 Press c / d to select “On” , and then press ENTER . • Only the sound from the Centr e Channel Input terminal is output from the speaker .
62 Useful features Dual screen functions Allows you to display two pictures on the scr een at one time. Dual screen Y ou can display two pictures except when inputting from a INPUT 5 terminal and card. Press P&P . • Dual scr een displays and a selected input source image displays.
63 T eletext language setting If T eletext infor mation does not display corr ectly , perfor m the setting procedur e below . Select from among 4 kinds of language tables: W est Europe, East Eur ope, Greek/T urkish, Cyrillic. Each table is compatible with the T eletext languages listed below .
64 Useful features T eletext function What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our System receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
65 Useful features T OP Over view screen BLOCK PAGES TV PROGRAMS COLOR BAR WEATHER NEWS MOVIE LOCAL SPORTS BLOCK 1 BLOCK 2 BLOCK 3 GROUP PAGES FOOT BALL BASKETBALL TENNIS SKI JUDO SWIM GROUP 1 GROUP 2 GROUP 3 GROUP 4 INDEX Displaying Subtitle Y ou can display several subtitles as they are transmitted.
66 Appendix • No power . • Unit cannot be operated. • Remote control unit does not operate. • Pictur e is cut off. • Strange colour , light colour , or dark, or colour misalignment. • Power is suddenly turned off. • No pictur e. • No sound.
67 Appendix PC compatibility c har t Apple and Macintosh ar e register ed trademarks of Apple Computer , Inc. DDC is a r egistered trademark of V ideo Electronics Standards Association. Power Management is a register ed trademark of Sun Microsystems, Inc.
68 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Contr ol of the System • When a program is set, the display can be contr olled from the PC using the RS-232C terminal.
69 Commands P I I I I D C C I I I I I I I I I I I I I I I I A A A A A A V POWER OFF (STANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) INPUT1 – 5 (1 – 5) CARD TV DIRECT CHANNEL (1 – 99) CHANN.
70 Appendix Item 32 o LCD COLOUR TV , Model:LC-32G2X (Display) TU-32GAX (A VC System) Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function P AL: B/G, D/K, I, P AL-60 SECAM: B/G, D/K,.
71 Dimensional dra wings 307 89.4 70.5 671 307 980 566 480 700.4 395.1 328 795 200 200 110 Unit: mm Display LC-32G2X LC-32/37G2X-K 04.5.22, 0:03 PM 71.
72 Dimensional drawings Unit: mm Display LC-37G2X 307 89.4 70.5 671 307 635 548 822.6 463.8 362 200 200 115 1102 917 LC-32/37G2X-K 04.5.22, 0:03 PM 72.
73 Dimensional drawings 365 303 220 49 5 430 95 Unit: mm A VC System LC-32/37G2X-K 04.5.22, 0:03 PM 73.
74 HO W T O SET THE F A CT OR Y PRESETS T urn off the Display by pressing MAIN PO WER . Press and hold down RESET on the A VC System and press MAIN PO WER on the Display to turn on the System. All setting items (except TV channel) return to the factory presetting.
FOR LOCA TION ENQUIRIES WITHIN REGARDING Y OUR LOCAL SHARP APPR O VED SER VICE CENTRE VISIT OUR WEBSITE A T www .shar p .net.au OR CALL SHARP A USTRALIA LOCAL CALL 1 300 135 022 SHARP CORPORA TION OF .
LCD COLOUR TELEVISION OPERA TION MANU AL 32 o DISPLA Y A VC SYSTEM LC-32G2X/ TU-32GAX 37 o DISPLAY AVC SYSTEM LC-37G2X/ TU-37GAX Printed in Japan TINS-B308WJZZ 04P06-JKG IMPOR T ANT NOTICE: This warra.
デバイスSharp TU-37GAXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sharp TU-37GAXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp TU-37GAXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp TU-37GAXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp TU-37GAXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp TU-37GAXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp TU-37GAXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp TU-37GAXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp TU-37GAXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
