SherwoodメーカーCDC-690Tの使用説明書/サービス説明書
ページ先へ移動 of 26
OPERATING INSTRUCTIONS CDC-690T Multiple Compact Disc Player 1 2 3 4 5 DELETE EDIT TRACK INDEX AB PROG AUTO RANDOM REPEAT ALL 1 DISCS 12 3 45 6 78 9 10 11 12 13 14 INTRO A< >B .
2 Introduction Congratulations on Your Purchase! Your new high fidelity Compact Disc Player is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation.
3 ENGLISH ENGLISH FOR U.S.A. AND CANADA ...................................... 120 V Units shipped to the U.S.A. and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
4 CONTENTS Introduction UNPACKING AND INSTALLATION ..................................................................................................... .. 2 READ THIS BEFORE OPERATING YOUR UNIT ........................................................
5 ENGLISH Rear Panel Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords.
ENGLISH 6 Front Panel & Remote Controls FRONT P ANEL CONTROLS REMOTE CONTROLS REMOTE CONTROL UNIT RM-CDC80 DISPLA Y 12 345 67 890 EDIT T .SIZE SEARCH SKIP TIME 1/ALL REPEA T A<->B RANDOM INTRO PROG/REV .
ENGLISH 7 POWER SWITCH Press this switch to turn the power on and press again to turn the power off. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier or receiver.
ENGLISH 8 DIGI LINK SYSTEM REMOTE CONTROL This unit can be remotely controlled with Sherwood DIGI LINK III amplifier or receive r . • For available functions, refer to the operating instructions of the Sherwood compatible amplifier or receiver.
ENGLISH 9 12 345 DISC SKIP OPEN/CLOSE 7m 30 30 REMOTE CONTROL UNIT RM-CDC80 DISPLAY 12345 67890 EDIT T.SIZE SEARCH SKIP TIME 1/ALL REPEAT A<->B RANDOM INTRO PROG/REV. DEL/REV. DISC 1 2 3 4 5 DELETE EDIT TRACK INDEX AB PROG AUTO RANDOM REPEAT ALL 1 DISCS 12 3 45 6 78 9 10 1112 13 14 INTRO A< >B .
ENGLISH 10 Before Operation Notes • Do not expose discs to direct sunlight, high humidity or high temperature for a long time. • When loading or unloading a disc in the disc tray, always place it with the printed side up.
ENGLISH 11 Operations PLAYING CDs “ ” indicator lights up. The unit plays from the first track on the 1st disc to the last track on the 5th disc. “ ” indicator lights up. Press this button again to restart play. " " indicator lights up when the number of tracks is more than 14.
12 ENGLISH CHANGING DISCS DURING Open the disc tray. 1 Change the desired discs. 2 SKIP AND SEARCH PLAY During playing the disc , the discs and can be changed. After changing the discs, press the OPEN/CLOSE button to close the disc tray. When changing the disc or , press the “DISC SKIP” button and rotate the disc tray.
13 ENGLISH PLAYING TRACKS IN RANDOM SEQUENCE PLAYING THE FIRST 10 SECONDS OF EACH TRACK “INTRO” indicator lights up. The unit plays the first 10 seconds of each track from the current disc to the 5th disc.
14 ENGLISH REPEAT PLAY Press again to cancel the repeat play. “REPEAT” indicator lights up and “A< >” indicator is flickering. At the beginning of the desired passage, press this button. 1 At the end of the desired passage, press this button again, then “B” indicator lights up and the desired passage is played repeatedly.
15 ENGLISH PLAYING TRACKS IN ANY SEQUENCE When selecting a track with the NUMERIC buttons, the selected track is stored automatically without pressing the PROGRAM/REVIEW button. Because it is impossible to know the playing time of each selection from five discs, “--:--” can appear on the time display.
16 Find the track 5 of the disc 1. 1 Example) When the track 3, 5 and 7 of the disc 1 are programmed and you want to store the track 7 of the disc 3 instead of the track 5 of the disc 1. Select the disc 3. 2 Rectifying any wrong programmed selection Repeat the above steps 2, 3 and 4 until the desired program is completed.
17 ENGLISH Select the track 7. 3 Store the selected track in the memory. 4 When selecting a track with the NUMERIC buttons, the selected track is stored automatically without the PROGRAM/REVIEW button. To clear one by one Each time this button is pressed in the program mode, the programmed selections are cleared one by one in the opposite sequence.
18 ENGLISH Up to 30 tracks for auto edit or 32 tracks for manual edit can be edited according to the tape length. It is possible only on the current disc. In the stop mode, select the auto edit mode. 1 Select the desired tape length. Example) When the tape length is 46 minutes.
19 ENGLISH If the PLAY button is pressed after editing the tracks, play starts from the first track of the side A for recording. If all tracks of the side A have been played, press the PLAY button to start play from the first track of the side B for recording.
20 ENGLISH SELECTING A BRIGHTNESS OF In the edit mode, check as you do the programmed tracks. (refer to “Checking the programmed selections” on page 16) In the edit mode, press the STOP/CLEAR button for more than 4 seconds or open the tray.
21 ENGLISH When there are the undesired discs or tracks, you can delete up to 32 selections. In the stop mode, enter the delete mode. 1 Select the desired track.
22 ENGLISH To recover one by one Each time this button is pressed in the delete mode, the deleted selections are recovered one by one in the opposite sequence. To recover all deleted selections Press this button for more than 4 seconds in the delete mode.
23 ENGLISH SELECTING A TIME DISPLAY USING THE HEADPHONES For private listening, insert a plug of the headphone into “PHONES” jack. During random or programmed play, etc.
T roubleshooting Guide 24 If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. ENGLISH REMEDY • Connect the cord securely. • Press the POWER button to ON.
25 SYSTEM ................................................................................................................................ Compact Disc Digital Audio TYPICAL AUDIO PERFORMANCES Number of channels .......................................
5707-04725-009-0.
デバイスSherwood CDC-690Tの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sherwood CDC-690Tをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSherwood CDC-690Tの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sherwood CDC-690Tの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sherwood CDC-690Tで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sherwood CDC-690Tを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSherwood CDC-690Tの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sherwood CDC-690Tに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSherwood CDC-690Tデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
