SiemensメーカーGigaset 2010の使用説明書/サービス説明書
ページ先へ移動 of 71
Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Gigaset 20 1 0 BK_FRONT.FM 14.8.98 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg.
KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Gigaset® 2 01 0 Wegweiser Switching the telephone on ( ➔ page 1). Making a call ( ➔ page 24). Registering new handsets at the base station ( ➔ page 49). Internal calls ( ➔ page 28).
KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Gigaset 20 10 1 2 3 4 5 6 7 8 9 10 11 12 Earphone Display St ore key Speed dial (delete) key On-hook key Inter com key Sta.
KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Keys Keys on the base station Keys on the Gigaset 1000S mobile unit ? Green paging key to call all handsets or to register new handsets. B Memory key to initialize procedures.
A1 KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Key functions and display symbols Display Symbols (top line) Display symbols (bottom line) All digits and characters are displayed on the top line, whi- le the symbols for various operating modes are displayed on the bottom line.
A2 KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Meaning of symbols ➔ page 2 (cross-reference to a related topic). B #* 5 Press keys in this sequence. ? Press key from the base station. Q Delete function of the speed dial ke y.
A3 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 KAP01.FM5 14.8.98 Safety precautions ● Do not submerge batteries in water; do not throw them into fire. ● Do not dispose of old, defective batteries with normal household garbage. ● Batteries become warm during charging.
A4 KAP01.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Certification and CE marking Siemens Gigaset 2010 was certified according to EU guideline 91/263/EEC (CTR 6, CTR 10). Anyone is per- mitted to connect this telephone to a telephone jack and use it .
Contents GIGA2010.IVZ 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Stepwise startup .......................................................................................................................... 1 Step 1: Observe the safety precautions .
Contents GIGA2010.IVZ 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Internal consultation calls and transferring calls ................................................................... 30 Consultation calls ..............................
Stepwise startup 1 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Stepwise startup Follow the installation and setup instructions “step by step” as described .
Stepwise startup 2 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 3: Connecting the base station Phone cord Insert the RJ- 1 1 plug on your phone cord into the base sta- tion . The jack on the bottom of the base station is marked with the following symbol : Insert the phone plug on your phone cord into your phone socket .
Stepwise startup 3 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 4: Inserting the batteries into the handset The handset is powered by two batteries. Hold the handset with the keypad side facing down. Slot the batteries into the battery compartment.
Stepwise startup 4 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 6: Check signaling method Telephone lines can use the following signaling methods: ● dial pulsing ( DP ) ● dual-tone multifrequency signaling (DTMF ) The factory default for your Gigaset 2 01 0 is DTM F .
Notes on operation 5 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Notes on operation Installing the base station Installation site/installation area ● A 220/230V power socket must be located at the in- stallation site.
Notes on operation 6 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Notes on operating the handset For users who wear hearing aids If you wear a hearing aid, please note that radio signals can interfere with hearing aids, and if sufficiently loud, can cause a very unpleasant humming sound.
Notes on operation 7 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 When installing and using the rechargeable batteries, please follow the rules below: ● Initially charge the batteries thoroughl y. We recom- mend charging the batteries for approximately 16 hours without interruption (overnight for example).
Notes on operation 8 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Mounting the carrying clip onto the handset If required, you can mount the carrying clip supplied with the handset, e.g. if you wish to carry the handset in your pocket.
Notes on operation 9 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 T echnical data Standard: DECT = D igital E nhanced C ordless T elecommunications GAP = G eneric A ccess P rof.
Notes on operation 10 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Third party use/disposal Gigaset 2 01 0 telephone should only be passed onto third parties if the instructions for use are included.
Notes on operation 11 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Procedure in the case of malfunctions Not every malfunction means that there is an actual de- fect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself.
Notes on operation 12 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Symptom Cause Remedy With telephone systems: no connection or wrong con- nection after dialing from a memor y . Exchange code not entered Enter exchange code ( ➔ page 18).
Notes on operation 13 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Overview: Signal tones tuuuuut tuuuut tuuuut tuuuut tut tut tut tut tut tuuuut tut tuuut tuuuuut tuuut tuuut 0.8 s tone 0.8 s pause Recall: 3 x 0.2 s tone repetition following 0.
Operating modes 14 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating modes ON/OFF/PROTECTED modes Y ou can switch your handset to ● protected mode , ● off , ● and on ( again ). When the handset is in protected mode, it is protected against unintended use .
Operating modes 15 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Switching on the handset When the handset is in protected mode: Pr When the handset is switched off: Switching on the handset h Press the handset key briefl y . Y ou will hear the positive confirmation beep.
Operating modes 16 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Signaling method The PTT operates telephone connections with two differ- ent signaling methods: ● Dial pulsing (DP) ● Dual-tone multifrequency signaling (DTMF) The factory default setting for your Gigaset 2 01 0 is DTM F .
Operating modes 17 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating in a telephone system To be able to operate your Gigaset 2 01 0 in a telephone system, you must first 1 . check the signaling method, 2. enter the exchange code, 3.
Operating modes 18 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Exchange codes For through connection to the public telephone network you must set: ● the exchange code ● the.
Operating modes 19 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Modify the pause length according to the excharge code Possible pause lengths are: 1 second 2 seconds 3 seconds (.
Operating modes 20 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Changing the system code Changing the handset PIN Resetting the base station to factory defaults Y ou can use thi.
Operating modes 21 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Resetting the Gigaset 2000S handset to factory defaults Y ou can use this procedure to reset the following settin.
Incoming calls 22 KAP05.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Incoming calls Accepting calls An incoming call is indicated by the ringer (bell symbol) .
Switching off the microphone (mute function) 23 KAP05.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Ex tern al call-waiting during internal calls If you are on an internal call with a second handset and a external call arrives, this is indicated by the call-waiting function .
External outgoing calls 24 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 External outgoing calls Calling external subscribers Y ou will hear the ring tone .
External outgoing calls 25 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Manually inserting a pause If you repeatedly get the busy symbol following automatic dialing from the telephone director y , e.g. a f ter the country code, you can enter a pause (three seconds), e.
External outgoing calls 26 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Dialing speed dial numbers Y ou can dial a call number by pressing the digit key used to store the number ( ➔ page 38). Dialing with speed dial numbers and number check c Press off-hook key.
External outgoing calls 27 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Device control using dual-tone multifrequency signaling (DTMF) If your telepone is connected to a line with dial pulsing (DP), you can switch to dual-tone multifrequency signaling (DTMF) once the connection has been set up.
Collective ringing and internal calls 28 KAP07.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Collective ringing and internal calls Making collective calls to all handsets from the base station It can be useful to make a collective call from the base sta- tion, for example, to locate mislaid handsets.
Collective ringing and internal calls 29 KAP07.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Allowing internal parties to listen in on a call It is possible to enable an internal party to listen in on a call with an external party from his/her handset .
Internal consultation calls and transferring calls 30 KAP08.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Internal consultation calls and transferring calls During a external call it is possible to: ● hold a consultation call with an internal part y, ● transfer the external call to the internal part y .
Internal consultation calls and transferring calls 31 KAP08.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 T ransferring calls When more than one handsets are in operation It is possible to transfer an external call to an internal party when more than one handset is in operation ( ➔ page 51).
Base station settings 32 KAP09.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Base station settings Y ou can program your Gigaset 2 01 0 to suit your own indi- vidual requirements.
Base station settings 33 KAP09.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting the base station ringer tone It is possible to define the tone used to signal calls at the base station. Y ou can choose from a range of six tones. The factory default is level 1 .
Individual settings on the Gigaset 2000S mobile unit 34 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Individual settings on the Gigaset 2000S mobile unit Y ou can configure your mobile unit individuall y . All settings are made directly at the mobile unit.
Individual settings on the Gigaset 2000S mobile unit 35 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting the handset volume The handset has three volume settings: The factory default is level 1 (normal).
Individual settings on the Gigaset 2000S mobile unit 36 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the negative confirmation tone If the negative confirmation tone is activated, each incor- rect entry is confirmed acousticall y.
Individual settings on the Gigaset 2000S mobile unit 37 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the synchronization tone If the synchronization tone is active, the unit signals when you come back within range of a base station.
Individual settings on the Gigaset 2000S mobile unit 38 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Speed dial numbers Y ou can store speed dialling numbers for frequently re- quired external numbers. These speed dialling codes can then be used for calling outside numbers ( ➔ page 26).
Individual settings on the Gigaset 2000S mobile unit 39 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Notebook function Y ou can store a directory number as a speed dial number during a call. Clearing all speed dial numbers B Q Initiate procedure.
Activating/deactivating the call duration display 40 KAP11.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the call duration display In the case of external calls ( ➔ page 24), the call duration display is started approximately 12 seconds a f ter the last digit is dialed.
The Gigaset 2010 lock functions 41 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 The Gigaset 2 01 0 lock functions Activating/deactivating the Gigaset 2 01 0 lock for outgoing calls It is possible to lock the Gigaset 2 01 0 for outgoing calls.
The Gigaset 2010 lock functions 42 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Displaying and storing emergency numbers Deleting all emergency numbers B # 2 5 Start the setting procedure. o O Enter the fou r -digit system code (factory default “0000“) ( ➔ page 19).
The Gigaset 2010 lock functions 43 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Barred numbers for handsets By storing barred numbers for each registered handset, you can prevent certain external call numbers or types of number from being dialed if the call number lock is acti- vated ( ➔ page 44).
The Gigaset 2010 lock functions 44 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Deleting all barred numbers Activating/deactivating the call number lock Y ou can activate and deactivate the call number lock sep- arately for each registered handset.
The Gigaset 2010 lock functions 45 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting trunk access for the handsets Y ou can define for each registered handset whether exter- nal calls can be made from it or not.
Lock functions on the handset 46 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Lock functions on the handset Activating/deactivating the handset lock Y ou can lock your handset for outgoing external calls to protect it against unauthorized use.
Lock functions on the handset 47 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Display or store a DSS number Deleting a DSS number B 8 8 Start setting procedure. o Enter the handset PIN (factory default “000 0 “). ( ➔ page 20).
Lock functions on the handset 48 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Handset display with active lock Display with locked handset Display with system lock Display with .
Registering/de-registering more than one handsets at the base station 49 KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Registering/de-registering more than one handsets at the base station Y ou can operate up to six handsets from the Gigaset 2000 family at a Gigaset 2 01 0 base station.
Registering/de-registering more than one handsets at the base station 50 KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 De-registering a handset from a base station o # Enter fou r -digit base code ( ➔ page 19) (factory default: “0000“) und then press # .
Operating more than one handset 51 KAP16.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating more than one handset Ring priority for incoming calls It is possible to set how incoming calls should be signaled when operating several handsets.
Operating more than one handset 52 KAP16.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Excluding or reintegrating a handset from/into collective ringing Selecting a handset for ring priority Setting the number of rings for ring priority B # 1 Start the setting procedure.
Operation at more than one base station 53 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operation at more than one base station Y ou can register and operate your handset at up to 6 Gigaset base stations .
Operation at more than one base station 54 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating base station number display on handset Y ou can program your handset to display the base station with which the unit has radio contact.
Operation at more than one base station 55 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 With Gigaset 2000S handset Automatic search for a base station if the preferred base stat.
Operation at more than one base station 56 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Reset the factory default Y ou can reset the handset to the factory default: With Gigaset 2000S handset B ü 0 Start the setting procedure. The numbers of the base sta- tions at which the handset is registered are displayed.
Quick reference guide handset Gigaset 2000S 57 KAP20A.FM5 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Quick reference guide handset Gigaset 2000S Switch handset to ON/OFF/PROTECTED: h Ac.
Index 58 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 B Barred numbers deleting ................................................... 44 details ..................................................... 43 displaying ...........
Index 59 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 H Handset Activating/deactivating base station number ............................... 54 collective call .................................... 28 , 51 de-registering at the base station .
Index 60 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Ring priority for incoming calls ...................... 51 Ringer tone handset Gigaset 2000S .................. 34 volume handset Gigaset 2000S .............. 34 Ringer volume base station .
KAP21.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 U6 Issued by the Private Communication Systems Division Hofmannstrasse 5 1 , D-81359 München © Siemens AG 1998. All rights reserved. Delivery subject to availability. Technical modification reserved.
デバイスSiemens Gigaset 2010の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Siemens Gigaset 2010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSiemens Gigaset 2010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Siemens Gigaset 2010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Siemens Gigaset 2010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Siemens Gigaset 2010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSiemens Gigaset 2010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Siemens Gigaset 2010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSiemens Gigaset 2010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。