SiemensメーカーTC35の使用説明書/サービス説明書
ページ先へ移動 of 39
s User Guide TC3 5 Terminal www.siemens.com/wm be inspired Wireless Modules www.siemens.com/wm.
.
1 Safety information Radio devices have limitations in the vicinity of electronic devices: • Switch the TC35 Terminal off when you are in a hospital or near medical devices like pacemakers or hearing aids. The Terminal may interfere with the operation of these devices.
2 Contents Safety information ................................ 1 Contents ................................................. 2 Overview ................................................ 4 Front view .......................................... 4 Rear view .
3 Contents Operating states / LED ........................ 29 POWER DOWN ............................... 30 Network search ............................... 31 Standb y ............................................ 31 Tal k ..............................
4 Overview Front view Rear view Plug-in power Antenna connector RS232 interface (9-pin D-Sub) LED display Handset connector Mini-SIM card holder.
5 Product description The TC35 Terminal is a compact GSM modem for the transfer of data, voice, SMSand faxes in GSM networks. Industrial standard interfaces and an integrated SIMcard reader mean it can be used rapidly, easily and universally as a dual band GSM Terminal.
6 Product description Highlights • Dual-band EGSM900 / GSM1800 • Data, voice, SMS and fax • R&TTE approval, GCF approval • Easy to integrate • Industrial interfaces • LED display • W.
7 Features Product data • Dual-band EGSM900 and GSM1800 • Certified in accordance with GSM phase2/2+ • Output performance: – Class 4 (2 W) for EGSM900 – Class 1 (1 W) for GSM1800 • Control via AT commands • Input voltage range +8V ... +30V • Dimensions: 65 x 74 x 33mm • Weight: approx.
8 Features Supplementary services • Phone book • Multiparty • DTMF (Dual Tone Multi Frequency) External interfaces • Connector for plug-in power supply unit • Handset audio interface • Mini-SIM card holder • Antenna connector FME (male) • RS232 interface (V.
9 Installation Package contents / scope of delivery • Package unit: TC35 Terminal and user guide L36880-N8600-A100 • TC35 Terminal S30880-S8600-A10 • User guide A31008-H8600-A1-*-7619 Safety and installation information • The Terminal should be installed and set up only by qualified personnel.
10 Installation Mounting kit for top-hat rail installation The TC35 Terminal can be attached to a 35mm top-hat rail using this mounting kit. There are two screws that are used tofix the top-hat rail adapter to the TC35 Terminal. The TC35 Terminal can be inserted onto the top-hat rail using this adapter.
11 Interface description The following interfaces are available on the TC35Terminal: • Connector for the plug-in power supply unit • Handset connector • Mini-SIM card holder • Antenna connector FME (male) • RS232 interface (V.
12 Interface description Purpose of the connectors/connections Use and operation The power supply is implemented by the + - and the GND wire. To switch the TC35 Terminal on, proceed as follows: – Either activate the DTR control line via the RS232 interface – Or connect IGT_IN to + .
13 Interface description Polarity reversal protection Polarity reversal protection is implemented by means of a power diode. The diode has a reverse voltage of 400V. Overvoltage protection Overvoltages are suppressed by a Zener diode after the polarity reversal protection diode.
14 Interface description Interference immunity • The cable length must not exceed 3m • Current carrying capacity <1.5A (Western modular jack) • Nominal signal range: 0.
15 Interface description Handset connector The handset is connected via a 4-pin Mini- Western socket. The audio interface has a symmetrical design. The audio interface can be configured by AT commands. Threeaudio modes are prepared in the GSM module for this purpose.
16 Interface description Handset connector Purpose of the connectors/connections 2 1 3 4 1 MICN 2 EPN 3 EPP 4 MICP Signal name PIN I/O Description Parameters MICN 1 DC:O AC:I Microphone input minus DC (no load): U 0 =6.0V±10% (MICP) U 0 =0V (MICN) R i = 4.
17 Interface description Use and operation A connected handset can be used when the customer application initiates the TALK state with AT commands via the RS232 interface.
18 Interface description SIM card connector The connector is intended for 3V SIM cards in accordance with GSM11.12 phase2 to operate the Terminal. The SIM card (3V type) must be inserted in the card holder to put the TC35 Terminal into operation. 1. Make sure that there is no voltage applied to the TC35 Terminal.
19 Interface description 3. Insert the SIM card in the SIM card holder and push it back into the housing..
20 Interface description Purpose of the connectors/connections Use and operation A SIM card holder from Molex with a SIM_IN contact is used. Only when the card holder is inserted is the switched closed. The card can only be replaced when the GSM engine is in the POWER DOWN state.
21 Interface description The Bootbox BB35 enables software to be updated via the SIM interface. The Bootbox is connected instead of a SIM card (see "Bootbox BB35" on page33).
22 Interface description Transmission type and method • Digitally modulated RF burst signal • GMSK in accordance with GSM05.04 • Half duplex • Bidirectional Interference immunity • Electrost.
23 Interface description RS232 interface The RS232 interface is the interface for the application software and the connection to the PC. The customer application communicates with the TC35 Terminal or the TC35 GSM engine by means of A Tcellular commands.
24 Interface description Purpose of the connectors/connections Use and operation In order to control the Terminal and transfer data, the customer application (e.g. host computer) is connected via the RS232 cable. Signal name PIN I/O Description Parameters DCD 1 O The functions correspond to those of a serial interface on the basis of a V.
25 Interface description Interference immunity • The connecting cable must not exceed 1.8m in length. • Nominal signal range: ±15V • Max. load current 1A • Electrical fast transient burst req.
26 Startup Before startup, the components required for your application must be connected. The SIM card must be inserted in a deenergized state. The TC35 Terminal is ready for operation when supply voltage is applied and the ignition line is activated.
27 Startup In its energized state, the GSM module provides the supply voltage (VDD). VDD ensures that the switching regulator remains on, even when its closing condition is lost (i.
28 Startup Activation of the PD_IN reset signal on the power supply connection The POWERDOWN line on the GSM module is connected to the watchdog input pin of the power supply ASIC, which can only be switched off by changing the watchdog condition. To do this, the PD_IN Terminal reset line is active (high) for at least 3.
29 Operating states / LED The LEDs display the following operating states of the Terminal: Operating state LED After connecting the plug- in power supply unit On for 2 s POWER DOWN Off – Network sea.
30 Operating states / LED Note: Usually, the network search takes only a fewseconds till the Terminal is registered. If the flashing continues, this means that no SIM card is inserted, no PIN number is entered or no GSM network is available. POWER DOWN Once the operating voltage is applied ( + and GND), the TC35 Terminal is in the POWER DOWN state.
31 Operating states / LED Network search (no SIM card, no PIN number, no GSM network) In the network search state, the TC35 Terminal searches for a GSM network. All the components in the GSM Terminal (module) that are not required are shut down in several stages by the energy-saving software.
32 AT command control The TC35 Terminal is controlled and programmed by means of AT commands. The AT command structure corresponds to the TC35 module used.
33 SW update A SW update for the TC35 Terminal takes place via the RS232 interface or the SIM interface. These interfaces must be designed in such a way that the upgrading ofthe TC35 Terminal is integrated in the application. The software can be obtained from the ICM WM home page.
34 Compatibility Compatibility withthe predecessor, the M20Terminal The direct predecessor of the TC35 Terminal is the M20 Terminal. The antenna connector is not compatible. The modified version (passive version) of the Votronic handset must be operated at the audio interface in accordance with HH-SI-30.
35 Certification / maintenance Certification The TC35 with its IMEI number is approved for operation in GSM networks and complies with the following EU directives: • Directive 89/336/EEC on electrom.
36 Index A Accessories 8 Antenna connector 4, 11, 21 AT command control 32 Audio 7 B Bootbox 33 C Certification 7, 35 Compatibility 34 D Data 7 E External interface 8 F Fax 7 Features 7 Fuses 13 H Han.
Issued by Siemens AG ICM Wireless Modules Haidenau Platz 1, D-81667 Munich Germany www.siemens.com/wm Subject to changes in technology and availability.
デバイスSiemens TC35の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Siemens TC35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSiemens TC35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Siemens TC35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Siemens TC35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Siemens TC35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSiemens TC35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Siemens TC35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSiemens TC35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。