Silex technologyメーカーSX-3700WBの使用説明書/サービス説明書
ページ先へ移動 of 14
2-1 Users Manual SX2 PRICOM SX-3700WB 2. PRICOM SX-3700WB This product is a wireless USB device server that will serve USB type peripheral equipment (a printer, scanner etc.). By using the bundled PRICOM Monitor SX, it is possible to view the state of the connected printer via a network.
2-2 Users Manual SX2 PRICOM SX-3700WB Environment The following are needed for this product. The followings are objects that connect to the network. - PC with wireless communication - USB Cable (A-B Type Connectors) - Printer, Scanner etc.
2-3 Users Manual SX2 PRICOM SX-3700WB Equipment explanation Part name and function <Top/Front Side> The LEDs have the following meaning: Infra LED (Green) Lights when an Infra. mode network connection is established. Link LED (Green) Lights when an OldAdHoc mode network connection is flashed.
2-4 Users Manual SX2 PRICOM SX-3700WB - Do not turn off the power to this product while it is initializing to factory default. - When this product is turned on again after factory default is completed, do not push the pushbutton switch.
2-5 Users Manual SX2 PRICOM SX-3700WB < Put into infrastructure mode > 1. Please verify that AC adapter is connected and that this product has started normally. 2. Push and hold the push switch down. Continue to hold down the push switch for about 5 seconds.
2-6 Users Manual SX2 PRICOM SX-3700WB 4. Make sure that printer is working and turned on. - Using an AC adapter other than the one provided with this product can cause damage. - Wait for 2 or more seconds after connecting/disconnecting the USB cable. - Do not disconnect the USB cable during printing, scanning or reading/writing from a memory card.
2-7 Users Manual SX2 PRICOM SX-3700WB Other Functions The following describes of the other functions of this product. Function Assign the IP address automatically using DHCP, BOOTP and RARP - DHCP/BOOTP If a DHCP/BOOTP server is working on your network, the DHCP/BOOTP protocol of this product will assign the IP address to this product.
2-8 Users Manual SX2 PRICOM SX-3700WB - Scanner server If you use a USB device, this product will allow you to share the scanner via the bundled PRICOM USB Utility. - The PRICOM USB Utility is compatible with Wndows2000/WindowsXP - This product can connect to one scanner.
2-9 Users Manual SX2 PRICOM SX-3700WB Specification Hardware Specification CPU 32bit RISC CPU Memory RAM :8MByte FlashROM :1MByte Network Interface IEEE802.
2-10 Users Manual SX2 PRICOM SX-3700WB Software Specification Supported Protocol: TCP/IP, NetBEUI/NetBIOS, AppleTalk TCP/IP: Network Layer: ARP, RARP, ICMP, IP, IPv6, ICMP6 Session Layer: TCP, UDP App.
2-11 Users Manual SX2 PRICOM SX-3700WB This product operates at 2.4GHz No radio license is required to use this product. Take note of the following points. Do not use next to the following. - Microwave, scientific instruments, pacemaker or other medical equipment.
2-12 Users Manual SX2 PRICOM SX-3700WB Wireless Equipment for 2.4GHz band This band of equipment is used by the microwave, industry, science, medical equipment and licensed in room or low power (non licensed)radio stations. - Before you use this equipment, verify that it will not interfere with other broadcasting.
2-13 Users Manual SX2 PRICOM SX-3700WB The PC connects directly to our product in AdHoc mode. <AdHoc mode> Each wireless product connects directory.
2-14 Users Manual SX2 PRICOM SX-3700WB <Infrastructure mode> In Infrastructure mode this product connects through an access point. An Access point allows communication between wired and wireless environments. Connect this product to the USB device using a USB cable.
デバイスSilex technology SX-3700WBの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Silex technology SX-3700WBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSilex technology SX-3700WBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Silex technology SX-3700WBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Silex technology SX-3700WBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Silex technology SX-3700WBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSilex technology SX-3700WBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Silex technology SX-3700WBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSilex technology SX-3700WBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。