Sim2 MultimediaメーカーHT300 XTRAの使用説明書/サービス説明書
ページ先へ移動 of 32
User and Installation Manual The home theater projector HT300 XTRA cod.46.0328.000.
LIGHT F1 ZOOM FOCUS F2 Not active in this model. Not active in this model. MENU - Activates the On Screen Display menus. Navigates menu pages. FREEZE Freezes a moving picture. STAND-BY Switches off to stand-by. 0-9 Keys Switch on from stand-by and allow direct source selection.
1 XTRA 1 INTRODUCTION Congratulations and thank you for choosing the HT 300 XTRA , a SIM2 Multimedia SpA product (Fig. 1) . C - S Y N C D V I.
2 XTRA A sophisticated proprietary optical system, coupled with a hight perfor mance zoom lens ensures hight contrast images, superior uniformity and edge-to-edge definition. A new 6-segment colour wheel dramatically reduces the so called “rainbow effect” and gives a better contrast, better colorimetry and a lower black level to the image.
3 XTRA 1 Projection lens 2 Lens shift knob 3 Cooling air inlet vents 4 Remote control IR sensor 5 Cooling air outlet vents 6 Adjustable carry-handle 7 Adjustable levelling feet 8 Ceiling/wall bracket .
4 XTRA ! CAUTION RISK OF ELECTRIC SHOCK! DO NOT REMOVE THE TOP COVER Prior to switching on the projector please r ead each chapter of this manual carefully as this manual pr ovides basic instructions for using the projector .
5 XTRA Please follow carefully the warnings listed below , to ensure safe and long term per formance of your projector . • Connect the projector to a power supply with a nominal voltage within the following values: 100-240 V ac, 50/60 Hz, earthed (Fig.
6 XTRA 3 P ACKAGING AND CONTENTS T o unpack the pr ojector safely and easily please follow steps 1 to 4, as per drawing (Fig. 5). It is recommended that the carton and packaging is retained for future use and in the unlikely event that your pr ojector needs to be returned for repair .
7 XTRA Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling or wall installation. CAUTION: In the case of ceiling or wall mounting using a suspension bracket, follow the instructions carefully and comply with the safety standar ds you will find in the box together with the bracket.
8 XTRA KEYSTONE 20% C-SYNC DVI Fig. 9 The Orientation adjustment in the Set up menu will allow the projector to be used for desktop fr ont, ceiling front, desktop rear and ceiling rear installations (Fig.
9 XTRA which is undesirable for a large audience. Preferably , use a screen with black, non-r eflecting borders, which will perfectly frame the projected image. Avoid light shining dir ectly on the screen during pr ojection as this will reduce contrast and black level detail on the pr ojected image.
10 XTRA SWITCHING OFF AND RETURNING T O ST AND-BY By remote contr ol: press By keyboard: pr ess key When switching off, the pr ojector goes in to stand-by memorising the input selection at the time of switch-off.
11 XTRA 100 Hz. Computer Resolutions of VGA, SVGA, XGA, SXGA and UXGA can be displayed. C-SYNC DVI Fig. 19 This input is suitable for a RGB video signal, or for a Component (YCrCb) type, with composite synchronisation on the gr een signal (RGsB) or on the luminance (Y) signal (YsCrCb) through a cable with RCA/Phono type connector (Fig.
12 XTRA Only horizontal scanning frequencies of 15 kHz (standar d vi- deo resolution) or 32 kHz (high definition video, with pr ogressi- ve scanning) can be applied to this input. DVI INPUT A DVI-D signal (digital RGB) can be applied to this input ( Fig.
13 XTRA The output can be used to contr ol a screen masking system; its output can be set with the “ Screen contr ol ” adjustment in the “ Aspect ” menu. This output allows reduction in the ar ea of a 16:9 screen, into a 4:3 format, by activating a screen masking system (refer to screen manufactur er for further information).
14 XTRA 8 REMOTE CONTROL Insert the batteries, taking care to match the polarity , as indicated in the battery recess of the remote (Fig. 26) . + - + - + - + - four 1.5V AAA alkaline batteries Fig. 26 Change the batteries in the remote control if experiencing difficulty in sending commands to the pr ojector .
15 XTRA 9 ON SCREEN MENUS Vid eo NTSC/60Hz Normal Fig. 28 MAIN MENU T o access the main On Scr een Display menu, press the Menu key on the keyboard or the key Menu + or Menu - on the remote contr ol (Fig. 29) . The main menu is divided into four sections to cover various adjustments in a practical and logical manner .
16 XTRA PICTURE This menu features adjustments r elating to the projected image quality . BRIGHTNESS CONTRAST COLOR SHARPNESS FIL TER 20 50 50 7 6 CINEMA MODE Off PICTURE Auto VIDEO TYPE Normal VCR1 V.
17 XTRA IMAGE ADJUSTMENTS INPUT SIGNALS AND ADJUST ABLE/SETTING ITEMS This menu features adjustments r elating to position, aspect ratio and magnification etc.
18 XTRA POSITION Use this adjustment to position the image vertically and horizontally . HORIZONT AL: 9 VERTICAL: 6 ASPECT Determines the aspect ratio of the projected image. From this menu it is possible to select the aspect ratio by using the numeric keys 1.
19 XTRA Phase The phase adjustment determines the stability and sharpness of the vertical lines in the projected image. ADV ANCED SETTINGS Advanced colour settings are accessible via this menu. We r ecommend the use of these settings only to the experienced user , as their adjustment can seriously affect final image quality .
20 XTRA Select Pan (zoom button on the remote contr ol) to choose the area of image to enlarge, using all four arr ow keys. Via remote contr ol, it is possible to alter nate between modes, by pressing the key . SETUP The installation menu gives access to features that will allow for correct installation of the pr ojector .
21 XTRA 0 -10 KEYSTONE HORIZONT AL VERTICAL PROJECTION LENS T o adjust Focus and Size of the pr ojected image, use the lens settings. FOCUS ZOOM PROJECTION LENS F1 ZOOM FOCUS F2 ZOOM ZOOM ZO O M ZO O .
22 XTRA LANGUAGE Lists the languages options available for the On Screen Display menus. ENGLISH IT ALIANO FRANCAIS LANGUAGE DEUTSCH ESP ANOL PORT OGUES OSD POSITION T o position the On Screen Display within the pictur e area, use the arrow keys (Fig. 31a) or press the 1 to 9 keys on the remo- te control (Fig.
23 XTRA 10 CLEANING AND MAINTENANCE - Check the integrity of cables used to connect various sources. - If you ar e using the Remote Input Interface, do not to confuse the menu for selection of projector ’ s inputs ( Source Selection ), with the menu for selection of remote inputs ( Source Selection / RI2 ).
24 XTRA Image is disturbed, unstable or noisy - V erify compatibility of video/graphic signals with the technical specifications of the projector . - Check the integrity of cables connecting projector to various sources.
25 XTRA Y ou can purchase the following optional accessories at your Dealer: - Remote Input Interface with 10 m Cable. - W all/Ceiling Bracket Kit. 12 OPTIONAL ACCESSORIES Use only original, or SIM2 Multimedia appr oved, accessories.
26 XTRA Low V oltage Power Output: two 12 Vdc output, 100 mA max on jack connectors GENERAL Supply: fro m 100 to 240 V ac, -10% +6% tolerance Frequency: from 48 to 62 Hz Consumption: 180 W max Fuse: T 3.15A H, 5 x 20 mm Dimensions of projector: 352 mm x 174 mm x 318 mm (LxHxD) 13 ” -7/8 x 6 ” -7/8 x 12 ” -1/2 (LxHxD) Weight of pr ojector: 5.
27 XTRA C PROJECTION DIST ANCES Follow the table below to determine the optimal projection distance (between the screen and the center of the lens). This will help you to obtain the desired scr een size. CC CC DP DP Screen Screen size width (diagonal) min.
28 XTRA Screen Screen size width (diagonal) min. DP max CC max. DP max CC Min projection distance 4/3 3,4 11 ’ 0 ” 4,0 13 ’ 2 ” 4,7 15 ’ 7 ” 5,4 17 ’ 7 ” 6,0 19 ’ 9 ” 6,7 22 ’ 0 .
29 XTRA 1 INTRODUCTION 1 2 IMPORT ANT SAFETY INSTRUCTIONS 4 3 P ACKAGING AND CONTENTS 6 4 INST ALLA TION 7 5 SWITCHING ON AND OFF THE PROJECTOR 9 Switch on from stand-by 9 Switching off and r eturning.
30 XTRA • Due to the constant product development, specifications and design might be subject to change without notice. SIM2 Multimedia S.p.a. • Viale Lino Zanussi, 11 • 33170 Pordenone - IT AL Y Phone +39.434.383.253-256 • Fax +39.434.383260-261 www .
デバイスSim2 Multimedia HT300 XTRAの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sim2 Multimedia HT300 XTRAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSim2 Multimedia HT300 XTRAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sim2 Multimedia HT300 XTRAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sim2 Multimedia HT300 XTRAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sim2 Multimedia HT300 XTRAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSim2 Multimedia HT300 XTRAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sim2 Multimedia HT300 XTRAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSim2 Multimedia HT300 XTRAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
