SmegメーカーGenuine Apell Gas Hob AP704S3の使用説明書/サービス説明書
ページ先へ移動 of 16
Contents 1. INSTRUCTIONS FOR SAFE AND PRO PER USE _______________ 22 2. POSITIONING OF HOB ___________________________________ 24 3. ELECTRICAL CO NNECTION ______________________________ 26 4. GAS CONNE CTION ______________________________________ 27 5.
Introduction 1. INSTR UCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTE GRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT I N ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTI ONS THEREIN BEFORE USING THE COOKING H OB.
Introduction THE IDENTIFICATION PLATE, WITH TECHNICA L DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASING M UST NOT BE REMOVED. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT H AS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER THE CASING.
Instructions for the installer 24 2. POSITIONING OF HOB The following oper ation requi res buildi ng an d/or carpentry work so must be carried out by a competent tradesman. Installation can be carrie d out on various materials s uch as masonry, metal, solid wood or plastic lamin ated wood as lo ng as they are heat resistant (T 90°C).
Instructions for the installer 25 In case of installation on a ho ll ow compartment with doors, a separatin g panel has to b e placed under the hob. Keep a min imum distance of 10 mm between t he bottom of the unit and t he panel surface. The panel has to be easily removable to allo w access in the event of technical service.
Instructions for the installer 26 3. ELECTRICAL CONNECTION Make sure that the voltage and capacit y of the power line conform to the data shown on the plate l ocated under the c asing.
Instructions for the installer 27 4. GAS CONNECTION Connection to the gas ma ins may be made with a rigid copper pipe or with a flexible pipe and conforming to the prov isions defined by standar d regulations in force. To facilitate connection, fitting A on the rear of the applianc e may be adjusted latera lly.
Instructions for the installer 28 4.1 Connection to LPG Use a pressure regulator and make t he connection to the tank accordin g to the provisions of stand ards regulations i n force. Make sure that feed pressure conforms to the levels shown in the ta ble in paragraph “ 5.
Instructions for the installer 29 5. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the appliance from the electrical socket. The hob has been inspect ed for G20 (2H) natural gas at a pressure of 20 mbar.
Instructions for the installer 30 5.2 Regulation for LPG Loosen screw A and push support B all the w ay. Use a doub le head wrench to remove nozzle C and assembl e the suitable on e, following the instructions indicated in the referenc e charts, with respect to the type of gas to use.
Instructions for the installer 31 5.3 Regulation for natural gas The hob has been inspect ed for G20 (2H) natural gas at a pressure of 20 mbar. To allow the unit to work wit h this t ype of gas, perform the same operations described in paragraph “ 5.
Instructions for the installer 32 6. FINAL OPERA TIONS Having carried out the ab ove adjustments, reassemble the appli ance following, backwards, the ins tructions in paragraph “ 5.1 Removi ng the hob ”. 6.1 Regulation of minimum for natural gas Replace the c omponents on t he burner and slide the knobs on the gas tap pins.
Instructions for the installer 33 6.3 Arrangement of burners on hob BURNERS 1 Auxiliary 2 Semi-rapid 3 Average rapid 4 Large rapid 5-6 Triple crown 7 Double crown 6.4 Lubrication of gas taps After a while, the gas tap may become hard to turn o r lock.
Insructions for the user 34 7. USING THE HOB Make sure that the flame-baffl e crowns, the caps and the grid h ave been assembled correctly. Grid C (supplied) should be us ed for "woks" (Chinese po ts). Adapter B (supplied) is to be used for small v essels.
Insructions for the user 7.3 Diameter of containers BURNERS Ø min. e max. (in cm) 1 Auxiliary 7-18 2 Semi-rapid 10-24 12-24 3 Average rapid 14-28 4 Large rapid 22-26 5-6 Triple crown 12-34 7 Double crown 7.
Insructions for the user 36 8. CLEANING AND MAINTENANCE NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. Before any intervention, disconnect the power supply of the device. 8.1 Cleaning Clean the cooking top regul arly every time you use it, obviously after it has cooled.
デバイスSmeg Genuine Apell Gas Hob AP704S3の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Smeg Genuine Apell Gas Hob AP704S3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmeg Genuine Apell Gas Hob AP704S3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smeg Genuine Apell Gas Hob AP704S3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smeg Genuine Apell Gas Hob AP704S3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smeg Genuine Apell Gas Hob AP704S3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmeg Genuine Apell Gas Hob AP704S3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smeg Genuine Apell Gas Hob AP704S3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmeg Genuine Apell Gas Hob AP704S3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。