SmegメーカーSCB60MFB5の使用説明書/サービス説明書
ページ先へ移動 of 28
Contents 3 THESE INSTRUCTIONS ARE VALID ONLY FOR E ND USER COUNTRIES WHOSE IDENTIFICATIO N SYMBOLS APPEAR ON THE COVER OF THIS MA NU AL. INSTRUCTIONS FOR THE INSTA LLER: these are for the qualified technician who must carry out a suitable check of the gas system, in stall the appliance, set it functioni ng and carry out an insp ection test.
Introduction 4 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND TH EREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PL ACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUA L AND ALL THE INST RUCTIONS THEREIN BEFORE USING THE COOKER .
Introduction 5 LOWER THE GLASS COVER SLOWL Y AND BY HAND. WARNING: THE GLASS COVER MAY SHATTER IF IT OVERHEATS. SWITCH OFF ALL RINGS AND WAIT FOR THEM TO COOL DO WN BEFORE CLOSING THE COVER. DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN.
Instruction for the installer 6 2 INSTALLATION OF THE APPLIANCE It is the law that all gas appliances are install ed by competent persons . Dependin g on the type of installation, it is in class 1 (Fig. A) or class 2 - su b-class 1 (Fig. B-C) Corgi gas installers a re approved to work to safe and satisfactory standa rds.
Instruction for the installer 7 2.1 Electrical connection Make sure that the power li ne voltage matches the spe cifications indicated on the rati ng plate located inside the storage compa rtment.
Instruction for the installer 8 2.3 Connecting to natural and LPG gas (Please see connection diagram) Make the connection to the appliance using flexible bayonet style hose in accordance to B.S. 669. The h ose connec tion at the rear of the appliance has a ½” BSP internal thread.
Instruction for the installer 9 3 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning o r maintenance work, detach the appliance from the electrical socket.
Instruction for the installer 10 3.2 Burner and nozzle characteristics table (50-60 cm models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instruction for the installer 11 3.3 Burner and nozzle characteristics table (90 cm models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1 50 30 350 73 71 Semi-rapid 1.
Instruction for the installer 12 3.4 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid (60 X 60) 4. Triple crown 5. Rapid (60 X 50) 3.5 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid 4.
Instruction for the installer 13 3.6 Adjustment of the oven burne r (only for gas oven models) To adjust the oven burners follow the procedure described belo w from inside the oven: • Open the oven door; • Remove the oven dish and shelf. • Lift up the oven floor and remove.
Instruction for the installer 14 4 FINAL OPERATIONS After replacing the nozzles, repo sition the flame- spreader crown s, the burner caps and the grids. Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the appliance with the on e correspondin g to the new gas .
Instruction for the installer 15 4.5 Mounting the rear top skirtboard (where applicable) • Loosen nuts B . • Position the skirt above the top, takin g care to align pins C with holes D . • Secure the ski rt to the top by tightening screws A . 4.
Instruction for the user 16 5 DESCRIPTION OF FRONT PANEL CONTROLS All the oven control s are grouped together on t he front panel. The table below provides a description of the symbols used.
Instruction for the user 17 ELECTRIC OVEN THERMOSTAT KNOB (CERTAIN MODELS ONLY) Selection of cooking tem perature is carried out by turning the knob clo ckwise to the required temperature, between 50 ° and 26 0 °C. The tell-tale light comes on to indicate that the oven is warming up.
Instruction for the user 18 6 USE OF THE COOKING HOB 6.1 Lighting of the cooking hob burners Before lighting the hob burne rs check that the flam e caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouple s.
Instruction for the user 19 6.3 Diameter of containers (60 cm models) BURNERS (60 X 50) 1. Auxiliary 2. Semi-rapid 5. Rapid Ø min. and max. (in cm. ) 12 – 14 16 – 22 18 – 24 BURNERS (60 X 60) 1. Auxiliary 2. Semi-rapid 3. Rapi d 4. Triple crown Ø min.
Instruction for the user 20 6.5 Switching on the electric hob 6.5.1 Switching on the electric hobs The cookers are equippe d with hobs of different diameters. The se are controlled by a switch and are turned on by turning the knob to the desired position.
Instruction for the user 21 7 USE OF THE OVEN For those models with electronic programmer, before using the oven make sure that the display shows the symbol .
Instruction for the user 22 7.4 Use of the electric grill 7.4.1 Using the grill in cookers with electric oven For short cooking pro cedures, such as the final cr isping of meat which is al read y cooked, select the static grill function and turn the thermostat knob to the maxim um temperature.
Instruction for the user 23 How to use the grill Once the grill is lit, the red warn ing light will come on. Leave the ov en to heat up for five minutes before placing the food inside. Food should be flavoured and ba sted with oil or melted butter before cooking.
Instruction for the user 24 7.5 Use of the gas grill 7.5.1 Manual lighting of the gas grill burner Having opened the oven door, press t he knob and turn it clo ckwise to the grill position, placing a lit match to the burner on the roof of the oven. Once the burner is lit, hold the knob down for about 10 seco nds.
Instruction for the user 25 8 ELECTRONIC PROGRAMMER (ONL Y ON EQUIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Clock adjustment When using the ove n for the first time, or after a power failure, the display flash es regularly and indicates .
Instruction for the user 26 8.4 End of cooking When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. After switching off the ala rm, th e display will once again show the right time together with the symbol , indicating that the oven has returned to manual opera tion mode.
Instruction for the user 27 9 DIGITAL TIMER (CERTAIN MODELS ONLY) This component allows an on-off beeper to be set to indicate the end of the cooking time. It is therefore just a timer, wi th no programming functions. LIST OF FUNCTIONS TIME-SETTING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON 9.
Instruction for the user 28 11 CLEANING AND MAINTENANCE 11.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in good condi tion it must be cleaned re gularly after each use, once it has cooled down.
Instruction for the user 29 11.2.2 Grids Rem ove the grids and clean them in warm water with a non -abrasive detergent, taking ca re to remove any incrustations. Repl ace them on the cooking hob. Continuous contact of the grids with the flame can cause th e paint near the hot areas to be altered.
Instruction for the user 30 12 EXTRAORDINARY MAINTENANCE The oven may requi re extraordinary maintenance or replacement of parts subj ect to wear such as seals, bulbs, and so o n. The following instru ctions describ e how to carry out these mino r maintenance operations.
デバイスSmeg SCB60MFB5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Smeg SCB60MFB5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmeg SCB60MFB5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smeg SCB60MFB5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smeg SCB60MFB5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smeg SCB60MFB5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmeg SCB60MFB5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smeg SCB60MFB5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmeg SCB60MFB5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
