SmegメーカーSEH530X1の使用説明書/サービス説明書
ページ先へ移動 of 15
Contents 18 1. INSTRUCTIONS FOR PROPER USE ______________________________________ 19 2. SAFETY INSTRUCTIONS _______________________________________________ 20 3. KNOW YOUR HOB ____________________________________________________ 21 4. BEFORE FIRST USE ___________________________________________________ 21 5.
Instruction for proper use 19 1. INSTR UCTIONS FOR PROPER USE ELECTRICAL CONNECTI ON: PLEASE REFER TO INSTALLATION INSTRUCTIONS FOR THE GAS & ELECTRICAL SAFETY RE GULATIONS AND THE VENTI LATION REQUIREMENTS.
Safety instruction 20 2. SAFETY INSTR UCTIONS INSTRUCTIONS FOR THE INSTALLER: THESE ARE INTEND ED FOR THE QUALIFIED TECHNICIAN WHO MUST INST ALL THE APPLIANCE, SET IT FUNCTIONI NG AND CARRY OUT AN INSPECTION TEST. IT IS OBLIGATORY FOR THE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE METHODS REQUIRED BY SAFETY RULES.
Instructions for the user 21 3. KNO W Y OUR HOB Glass surface of the appliance Single cooking zone Dual oval cooking zone Dual round cooking zone Timer controls Control panel Triple cooking zone Heating zone NOT ALL COMPONENTS DESCRIBED ARE PRESENT ON ALL MODELS 4.
Instructions for the user 22 5. COOKING ZONES The appliance features 4/5 coo king zones of different diameter and po wer. Their position is clearly indicated by circles and the heat gi ven off is defined by the m arkings on the glass surface. The 5 cooking zones are of the HIGH-LIGHT type and come on after a few seconds of being activated.
Instructions for the user 23 6. DESCRIPTION OF CONTR OL ON THE FR ONT CONTR OL P ANEL All the hob controls are groupe d together on the fr ont panel. T he table below provides a description of the symbols used.
Instructions for the user 24 7. USE OF THE COOKING HOB 7.1 Hobs with knobs 7.1.1 Single cooking zones Each knob sh ows the cooking zone it is for. For example, the sym bol identifies the knob that controls the rear right-han d cooking zone. To heat, turn the knob t o the desired position (1 to 6).
Instructions for the user 25 7.2 Hobs with touch-contr ol b uttons When an icon is pressed the unit bee ps to confirm. To operate the panel of the hobs equi pped with touc h-controls, lightly press the icon s printed on its surface.
Instructions for the user 26 7.2.8 Timer (on some models only) Some models are equipped with a 1 to 99-minute co oking timer. To use the timed cooki ng, first set the power level by following th e instructions given in paragraphs “7.2.2 Single Cooking Zones” and “7.
Instructions for the user 27 7.2.14 Switching off To switch the hob off, hold down for 1 secon d; this dea ctivates a ll cooking zo nes even if they a re in use or the lock-out function is active , and the hob will turn off compl etely.
Instructions for the user 28 8. CLEANING AND MAINTENANCE Before any intervention, disconnect the power su pply of the device. 8.1 Cleaning the ceramic hob The hob should be regula rly cleaned; preferably after every use, once the residual heat warning lights have gone off.
Instructions for the installer 29 10. INST ALLA TION 10.1 T ec hnical inf ormation Hob type See rating plate Electrical connections 220-240V~ 50/60Hz / 380-415V 2N ∼ 50/60Hz / 380 -415V 3N ∼ 50/60Hz HOB RATING Electric Maximum electrical power See rating plate DIMENSIONS OF THE HOB Width (mm) 290 595 720 900 Depth (mm) 510 510 510 510 10.
Instructions for the installer 30 For operation on 380-415 V 3N ∼ : use an - H05V2V2-F type five-core cable (5 x 1,5 mm 2 ). For operation on 380-415 V 2N ∼ : use an - H05V2V2-F type fou r-core cable (4 x 2,5 mm 2 ). For operation on 220-240 V 3 ∼ : use an - H05V2V2-F type fo ur-core cable (4 x 2,5 mm 2 ).
Instructions for the installer 31 10.4 POSITIONING OF TH E HOB The following operation requires building and/o r carpent ry work so must be carri ed out by a competent tradesman. Installation can be carried out on vari ous materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
Instructions for the installer 32 The diagrams illustrate the cutting sizes and a dditional shaping requi red for the installation hole if you decide to install the ho b flush with the work-top surface. The work-to p hole and shaping di mensions are purely guideline; it is essential to refer to you r actual ceramic hob before maki ng any cuts.
デバイスSmeg SEH530X1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Smeg SEH530X1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmeg SEH530X1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smeg SEH530X1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smeg SEH530X1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smeg SEH530X1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmeg SEH530X1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smeg SEH530X1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmeg SEH530X1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。