SmegメーカーSUK61MBL5の使用説明書/サービス説明書
ページ先へ移動 of 24
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________________________4 2. INSTALLATION OF THE APPLIANCE_________________________________________6 3. ADAPTATION TO DIFFERENT TYPES OF GAS ________________________________9 4. FINAL OPERATIONS _____________________________________________________12 5.
Introduction 1. INSTR UCTIONS FOR SA FE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFOR E MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANU AL AND ALL TH E INSTRUCTIONS THEREIN BEFORE USING THE COOKER.
Introduction DURING USE THE APPLIAN CE BECOMES VERY HOT . TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. DO NOT USE CONTAINERS OR BROI LERS THAT EXTEND BEYOND THE OUTE R PERIMETER OF THE HOB. THE APPLIANCE IS DESIGNED FOR USE BY ADULTS .
Instructions for the installer 2. INST ALLA TION OF THE A PPLIANCE It is the law that all gas applia nces are installed by competent persons . Corgi gas installers ar e approved to work to safe and satisfactory standards .
Instructions for the installer 2.1 Electrical connection Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.
Instructions for the installer 8 2.3 Connecting to natural and LPG gas FOR THE GAS CONNECTION, SEE THE TYPE OF APPLIANCE SUPPLY TUBE • Free hexagonal connector Make the connection to the appliance using flexible ba yonet style hose in accordance to B.
Instructions for the installer 9 3. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenanc e work, disconnect the appliance from the mains.
Instructions for the installer 10 3.2 Burner and nozzle characteristics tab le (Mod. 90 cm.) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instructions for the installer 11 3.4 Burner and nozzle characteristics tab le (Mod. 60 cm.) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instructions for the installer 1 4. FINAL OPERA TIONS After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the grids. Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas.
Instructions for the installer 1 4.4 W all fixing • Stretch out the chain attached to the cooker horizontally so that the other end touches the wall. • Mark the wall in the position where the hole is to be drilled. • Drill the hole, insert a wall plug and attach the ch ain.
Instructions for the installer 14 5. DESCRIPTION OF CONTR OLS 5.1 Front contr ol panel All the cooker controls and commands are on the front panel. If the cooker is equipped with an electronic programmer, before using the oven make sure that the symbol ; appears on the display.
Instructions for the user 1 VARIABLE GRILL KNOB This allows to vary heat intensity w hen cooking with the grill. The knob can be set with continuity between “ 0 ” and the st op release position, which corresponds to maximum heat.
Instructions for the installer 1 6. USE OF THE HOB 6.1 Lighting of the hob b urners Before lighting the hob burners check that the flame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples.
Instructions for the user 17 6.3 Diameter of the vessels to be used on each b urner BURNERS Ø min. and max. (in cm) 1 Auxiliary 12-14 2 Semi rapi d 16-24 3 Rapi d 18-26 4 Triple crown 18-26.
Instructions for the installer 18 7. USE OF THE O VEN For the models with electronic programmer, before using the oven make sure that the display shows the symbol .
Instructions for the user 1 7.2.2 Using the rotisserie in cookers with maxi oven Fit the supporting frame onto the se cond runner up from the bottom so that the seat to take the rod projects outside the o ven.
Instructions for the installer 2 7.3 Using the pIzza function (only on some models) This appliance Is equipped with a function spe cially developed for cookin g pizza. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as described b elow.
Instructions for the user 21 8. ELECTRONIC PR OGRAMMER (ONL Y ON EQUIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Cloc k adjustment When using the oven for the first tim e, or after a power failure, the di splay flashes re gularly and indicates .
Instructions for the installer 22 8.4 End of cooking When cooking is over, the oven will automatically swit ch off and, at the same time, an intermittent alarm will sound. After swit ching off the alarm, the display will once again show the rig ht time together with the symbol , indicating that the oven has returned to manual operation mode.
Instructions for the user 23 9. A V AILABLE A CCESSORIES The oven has 4 support for positioning pla tes and racks at various heights. Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grilling. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the installer 24 10. CLEANING AND MAINTENANCE 10.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in good condition clean it regularly after each use, once it has cooled down.
Instructions for the user 2 10.3 Cleaning of oven For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts. • Clean the oven grill with hot water and non-abrasive detergent. Rinse an d dry. • Do not allow residues of sugary foods (such as jam) to set inside the o ven.
Instructions for the installer 2 11. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
デバイスSmeg SUK61MBL5の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Smeg SUK61MBL5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmeg SUK61MBL5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smeg SUK61MBL5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smeg SUK61MBL5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smeg SUK61MBL5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmeg SUK61MBL5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smeg SUK61MBL5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmeg SUK61MBL5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。