Smooth FitnessメーカーCE 2.1の使用説明書/サービス説明書
ページ先へ移動 of 34
USER’S MANUAL SMOOTH CE 2.1 ELLIPTICAL TRAINER MODEL NUMBER: CE 2.1 USER WEIGHT LIMITATION: 300 lbs. TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800. 1167 SERIAL NUMBER (found on frame):.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 2 PREASSEMBLY For future serv ice or related questions : Please staple your receipt an d/or write in the name and phone num ber of the retail store wh ere you purchased your Smooth Fitness Elliptical Trainer.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 3 HARDWARE COMPAR ISON CHART Hardware chart : For your convenience, we have identified the hard ware used in the assembly of this product. This chart is provided to help you identify thos e items that may be unfamiliar to you.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 4 PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 1 Computer 1 CE2.1-001 30 20 x 91 x M14mm Bolt 2 CE2.1-030 2 Front Upright Frame 1 CE2.1-002 31 Bearing 6804zz 4 CE2.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 5 PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 59 Front F r ame Cover - Upp er 1 CE2.1-059 89 M10 Nylon Nut 2 CE2.1-089 60 Front F r ame Cover - Lo wer 1 CE2.1-060 90 M12 Nut 1 CE2.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 6 PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 7 PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 8 ASSEMBLY STEP 1 : First make sure to connect the Wire Harness – Middle (10 3) and Wire Harness – Lower (104) as sho wn belo w. Attach the Front Upright Frame (2) to the Frame (99) and secure us ing t wo M10 x 90mm Bolts (78), two ID 10mm Curve Washers (101) and t wo M10 Nuts (98).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 9 ASSEMBLY STEP 2 : First make sure to connect the Wire Harness - Upper (109) with W ire Harness - Middle (103) and Hand Pulse Sensor Wire – Upper (110) with Hand Pulse Sensor W ire – Middle (108) as shown belo w.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 10 ASSEMBLY STEP 3 : Slide the Handlebar – Left (16) and Ha ndlebar – Rig ht (17) onto the Front Upright F rame (2). Connect the Hand Pulse Sensor W ire - Middle (108) with Hand Pulse Sensor Wire – Lo wer (106) as shown below.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 11 ASSEMBLY STEP 4 : Attach the Left Upright (5) and Right Upright (6) to the Fram e (99) and secure usi ng t wo M8 x 60mm Allen Head Bolts (77), two ID 8mm Curve Washers (91) and two M8 x 80mm Allen Hea d Bolt (7 9).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 12 ASSEMBLY STEP 5 : Slide the 20 x 91 x M14mm B olt (30) throug h the Pedal Arm – Right (34) and Ha ndl eb ar – Right (17) and secure with M14 Nut (88) as shown.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 13 ASSEMBLY STEP 6 : Slide the20 x 91 x M14mm Bolt (30) throug h the Pedal Arm – Left (33) and Handlebar – Left (16) and secure with M14 Nut (88) as shown.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 14 ASSEMBLY STEP 7 : Attach the Pedal Arm Front Pivot Cover (18) into the ends of the Handlebar – Right (17) a nd Pe dal Arm – Right (34). Repeat the procedure on the Pedal Arm – Left (33) and H andlebar – Left (16).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 15 ASSEMBLY STEP 8 : Attach the Front Frame Cover – Upper (59) and Front F ra me Co ver – Lower (60) to the Frame (99). Secure with Fixing Inserts (85) and M4 x 50mm Screw (100). NOTE: The Fixing Insert (85) has been pre-a ssemb led to Front Frame Covers by factory.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 16 ASSEMBLY STEP 9 : Attach the Handlebar Cover (13) to the front side of Handle bar – Right (17 ) and secur e with four M4 x 15mm Screws (102). Then attach two Handlebar Inside C over (14) from the back side of the Handlebar – Right (17) to the Handlebar Cover (13).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 17 ASSEMBLY STEP 10 : Attach the Side Upright Bottom Cover - Left (3) and Side Upright Bottom Cover - Right (4) to Right Upright (6) using four M4 x 15mm Screw (102).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 18 ASSEMBLY STEP 11 : Attach the Side Upright Upper Cover - #1 (7) and Side Upright Upper Cover - #2 (8) to Right Upright (6) using one Fixing Insert (85) and four M4 x 15mm Screw (102).
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 19 LEVEL ADJUSTMENT LEVEL ADJUSTMENT : To adjust the level of the CE 3.2 Elliptical Train er simply rotate the Level Adjusters right or le ft to move them in or out of the Uprights. Tilt the Elliptical Tr ainer to access stabil izers.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 20 TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONS : The casters located on the rear of the unit all o w for easy trans port. Simply lift the front of the unit until the wheels touch the floor.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 21 COMPUTER INSTRUCTIONS A B C F D E MODE Button A B STOP Button LCD Display C D UP/ DOWN Buttons START Button E F ENTER Button.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 22 COMPUTER INSTRUCTIONS FUNCTIONS AND BUTTONS STOP: Press STOP to pause the functions during your exercise pr ogram . All the data on the display will freeze . Press START to resume the program and all the data dis played will continue until the program has finished.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 23 COMPUTER INSTRUCTIONS HEIGHT set up – After the User Code has been confirmed the LCD displa y will show 170cm/67 inches or the previous setting and begin flashing. Press the UP/DOWN button to adjust the user height information, the n press ENT ER to confirm.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 24 COMPUTER INSTRUCTIONS To pause the program whilst exercising, pres s the STOP button. To resume exercising, press the START button. If the STOP button is pressed after pausing t he prog ram, the computer returns to Power on Status.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 25 COMPUTER INSTRUCTIONS Interval Profile: (If user sets workout time above 16 minutes, the com put er will average the workout time in 16 sections as following “Resistance Profile”, i.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 26 COMPUTER INSTRUCTIONS P7: ENDURANCE After you have selected P7 ENDURANCE, t he T IME display will show the defau lt workout time of setting 32:00 minutes. Press the UP/DOWN button to adjust workout time then press ENTER to confirm.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 27 COMPUTER INSTRUCTIONS P9: TARGET HEART RATE After you have selected P9 TARGET HEAR TRATE, The HEART RAT E display will show the Target Heart Rate base o n your age. Your Target Heart Rate has been set whilst you were se tting USER AGE up with a user number e.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 28 WARRANTY Warranty Coverage : Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that e ach ne w product to be free from defects in workmanship and ma terial, und er normal use and conditions.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 29 IMPORTANT STEPS Warning : Before using this product, please consult your person al physician for a complete physical examination. Freque nt and strenuous exercise should be appr oved by your doctor first.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 30 TARGET HEART RATE Finding your puls e : To make sure your heart is beating in it s target zone, you’l l need to know how to monitor your heart rate.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 31 MUSCLE CHART Targeted muscle groups : The exercise routine that is performed o n thi s product will develop the upper and lower body muscle groups. These muscle groups are shown in gra y color on the chart b elow.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 32 STRETCHING ROUTINE Warm up and cool do w n : A successful exercise program consists of a warm-up, aerobic e x ercise, and a cool-do wn. Do the entire program at least two and preferably three times a week, resting for a day between workouts.
CE 2.1 ELLIPTICAL TRAINER Visit us at: www.smoothfitness.co m 33 STRETCHING ROUTINE Hamstring Stretch : Sit with your right leg extended. Rest t he sole of your left foot against your right inner thigh. Stretch toward your toe as fa r as possible. Hold for 15 counts.
Smooth Fitness 112 Gaither Drive Mt. Laurel, NJ 08054 Toll Free Customer Service: 1.888.800.1167 Website: www.smoothfitness.com.
デバイスSmooth Fitness CE 2.1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Smooth Fitness CE 2.1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmooth Fitness CE 2.1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smooth Fitness CE 2.1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smooth Fitness CE 2.1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smooth Fitness CE 2.1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmooth Fitness CE 2.1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smooth Fitness CE 2.1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmooth Fitness CE 2.1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。