SnapperメーカーLT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVの使用説明書/サービス説明書
ページ先へ移動 of 44
Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES I MODELS LT150H33IBV LT150H38IBV WLT150H38IBV WLT170H38IBV MODEL NUM BER EXPLA NA T ION LT 150 H 38 I B V MODEL .
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RA TIO N (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, deflect ors, switches, b lade controls an d other safety dev ices frequently for proper oper ation and location.
4 TABLE OF CONTENTS IMPORTA NT SA FETY INSTRUCT IONS .......... 2 - 3 TA BL E OF C ONT ENT S ........................................ 4 SEC TION 1 - FA MILIA RIZA T ION ......................... 5 Compone nts ..........................................
6 Section 1 - FA MILIA RIZA TION COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the c omponents and their operation BEFO RE OPERATING.
7 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires .
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RT ING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets.
9 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA R TING & OPERA T ION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shif t speed control lever to neutra l. 2. Start engine. Ref er to Section “ST ARTING ENGINE” . 3. Release c lutch/brake pedal. 4. Slowly shift speed contr ol lever forward for forward m otion or to the rear f or reverse m otion.
10 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STOPPIN G MO WER BLADE 1. Stop mower blade by moving blade engagem ent lever down to the "OFF" position. See F igure 2.11. FIGURE 2.11 WA RNING Once blade is disengaged, it s hould come to a complete stop in 5 seconds or less.
11 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. W ith engine "OFF", move to r ear of tractor . 2. Pull the roll r elease control all the way out to disengage the hydro transmis sion.
12 Section 2 - OPERA TING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHA NISM Data indicates that tragic back-over accidents occ ur each year. Thes e accidents us ually involve unsupervised children.
13 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the Tr actor, use genuine SNAPPER replacem ent parts only. Contact a local SNAPPER dealer f or parts and servic e assistance. For the correc t part or inform ation for a particular Trac tor, alway s m ention the model and s erial number.
14 Section 3 - MA INTENA NCE 3.2.3. CHECK MOWER BLA DE (Continued) FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. W ith engine "OFF", m ove blade engagement lever to "ON". 2. Measur e blade cable extension spr ing. Spring should extend 1" +/-1/8" f or proper belt tens ion.
15 Section 3 - MA INTENA NCE 3.3.2. MO WER COMPONENT S 1. Check deck drive belt for proper tension. Refer to Section “CHECK DECK DRIV E BELT”. 2. Check blades for sharpness, wear, dam age and torque. Ref er to Section “ MOW ER BLADE REPLACEMENT ”.
16 Section 3 - MA INTENA NCE 6. Steering Drag Link Lubricate both ends of steer ing drag link with a sm all amount of SAE30 oil. See Figure 3.10. FIGURE 3.10 3.3.4. TRACTOR LUBRICA T ION (Continued From Pre vious Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a sm all amount of SAE30 oil.
17 Section 3 - MA INTENA NCE 3.4 SERVICE - A NNUALLY 3.4.2. FUEL FILT ER 1. Service f uel filter as ins tructed below, on COLD ENGINE ONL Y ! NOTE: It may be necessary to drain the fuel tank before rem oving fuel filter to prevent spillage of gas oline.
18 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
19 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP eng ine. Set brake. Remove key. Remove spark plug wire f rom spark plu g and secure w ire away from spark plug.
20 Section 4 - A DJUSTMENT & REPA IR 4.2.4. A DJUST ING M OWER BLA DE – 33” DECK (Continue d from previous page) FIGURE 4.5 WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine.
21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
23 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
24 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
25 Section 4 - A DJUSTMENT & REPA IR 4.3.4. TRA CTION DRIVE BEL T A DJUSTM ENT Should a gradual loss of traction be noticed, it m ay be necessar y to adj ust the traction drive belt tension. Adjust as follows: 1. Move tr actor to a firm , level surfac e.
26 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
27 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
28 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
29 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
30 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
31 Section 4 - A DJUSTMENT & REPA IR 4.5 BA T TERY 4.5.1. BA T TERY REM OVA L 1. Raise oper ator's seat. 2. Rem ove the two adjusting knobs . 3. Rem ove seat assem bly and m ove forward. Use care not to disc onnect wires from seat switch. See Figure 4.
32 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! DO NO T attempt to service or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded.
33 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER Series H LAW N T RACTOR can be equipped with a variety of access ories that increase its versatility. The acces sories available for each model ar e listed in the c hart below.
34 SECTION 5 - ELECTRICA L SYSTEM SCHEMATIC – WIRING HARNESS P.N. 2-6616 LT150H33IBV & L T150H38IBV SCHEMATIC – WIRING HARNESS P.N. 7-3998 LT150H38HKV.
35 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CA USE CORRECTIVE A CT ION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact.
36 TROUBLESHOOTING GUIDE (Continued From Pre vious Page) PROBLEM PROBA BLE CA USE CORRECTIVE A CT ION Tractor Will Not Move Or L oss Of Traction 1. Speed control handle in the neutral “ N” position. 1. Place speed contr ol in desired speed. 2. Roll release contr ol in “ROLL” position.
37 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page 12 X.
38 3 YEA R LIM ITED WARRA NTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SNAPPER , through any authorized SNA PPER dealer will repl.
39 PRIMARY MA INTENA NCE.
40 PRIMARY MA INTENA NCE.
41 PRIMARY MA INTENA NCE.
42 PRIMARY MA INTENA NCE.
43 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following inform ation on your Snapper purchase) Model Nu mber ___________________________.
44 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
45 Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES I IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emiss ions information and cr itical safe ty warnings.
デバイスSnapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
