SonyメーカーBTA-NW1の使用説明書/サービス説明書
ページ先へ移動 of 36
3-070-124- 11 ( 2 ) Modem Adaptor with Bluetooth ™ Function Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom.
2- GB WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Countries and areas This product is intended to be used in the following countries or areas.
3- GB The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.
4- GB The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier.
5- GB T able of contents Introduction • The unit is designed to communicate with a Bluetooth device, and allow that device to access the Internet to send/receive data via the modem. • The unit complies to the protocols of a dial-up network. • Use of size AA alkaline dry batteries allows the unit to be used as a mobile device.
6- GB Precautions The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off.
7- GB Identifying the parts 1 POWER lamp (green) 2 ON LINE lamp (orange) 3 lamp (blue) Lamp POWER ON LINE (green) (orange) (blue) z – z z z zz z z : The lamp turns on : The lamp flashes 4 DC IN jack.
8- GB Pr eparing the unit Before using the unit, carry out the following preparations. If the plug of the exclusive modem cable does not match the telephone terminal jack, attach an optional plug adaptor. The plug of the exclusive modem cable is an RJ-11 plug.
9- GB To DC IN To a wall outlet (mains) or To a wall outlet (mains) AC power adaptor AC-PT1 AC power adaptor AC-PW1 x Using the supplied AC power adaptor Connect the AC power adaptor to the DC IN jack on the unit and a wall outlet (mains). Notes • The socket outlet should be as close as possible to the unit and easily accessible.
10- GB Setting up the unit You must make certain settings before you can connect the unit to your phone line. Choose the proper settings for your telephone signaling type. You also have to set the AREA CODE switches according to your area. ( 1 ) Before making the settings, check that the POWER ON/OFF switch is set to OFF.
11- GB To check the dial speed of a pulse dialing phone You can change the dialing speeds of some pulse dial phones. To check the dial speed, switch the dial speed selector on the phone and check the clicking sound. The slower one is the normal setting.
12- GB Registering Bluetooth devices Up to 16 Bluetooth devices can be registered with this unit. When registering devices, consult the operating instructions supplied with the Bluetooth device. When you try to register the 17th device, you must clear all of the previous registrations.
13- GB When you try to register a 17th Bluetooth device You have to clear all the previous registrations. Press CLEAR using a sharp-pointed object to clear all the registrations. Once you turn the unit off and on, you can register a new Bluetooth device.
14- GB Communicating with the Bluetooth device After registering a Bluetooth device, you can communicate with that Bluetooth device. ( 1 ) Set the POWER ON/OFF switch to ON.
15- GB T r oubleshooting If you experience trouble with your unit, first check the following items. Should your unit still not operate properly after you have made these checks, consult your Sony dealer or local authorized Sony service facility. Power Symptom Cause and/or solution • The size AA alkaline dry batteries are completely dead.
16- GB Communication Symptom Cause and/or solution • The exclusive modem card is not inserted properly. c Insert it properly. See “Preparing the unit” on page 8. • The size AA alkaline dry batteries are completely dead. c Replace them with new size AA alkaline dry batteries.
17- GB Specifications Wireless communication Communication system Bluetooth specification Ver. 1.1 Maximum communication speed 1) 2) Approx. 723 kbps Maximum output 3) Bluetooth specification Power Class1 Receiver sensitivity 3) – 70 dBm Communication distance 2) Approx.
2- FR AVERTISSEMENT Pour pr é venir tout risque d ’ incendie ou d ’é lectrocution, conserver cet appareil à l ’ abri de la pluie et de l ’ humidit é .
3- FR Avertissement: L ’ utilisateur ne doit pas tenter de faire ces raccordements lui-m ê me; il doit avoir recours à un service d ’ inspection des installations é lectriques, ou à un é lectricien, selon le cas.
4- FR.
5- FR T able des matièr es Introduction • Cet appareil est con ç u pour communiquer avec un p é riph é rique Bluetooth et lui permettre d ’ acc é der à Internet pour l ’ envoi et la r é ception de donn é es via le modem. • Cet appareil est conforme aux protocoles d ’ acc è s à un r é seau commut é .
6- FR Précautions L ’ appareil n ’ est pas d é connect é de la source d ’ alimentation (secteur) tant qu ’ il reste branch é sur la prise murale, m ê me si l ’ appareil proprement dit a é t é mis hors tension.
7- FR A propos de l’adaptateur secteur fourni • Lorsqu ’ il est pr é vu que l ’ appareil ne sera pas utilis é pendant une p é riode prolong é e, le d é brancher de la prise murale (secteur). Pour d é brancher le cordon d ’ alimentation, le tirer par la fiche.
8- FR Identification des différ entes parties de l’appareil 1 T é moin POWER (vert) 2 T é moin ON LINE (orange) 3 T é moin (bleu) T é moin POWER ON LINE (vert) (orange) (bleu) z – z z z zz z z : le t é moin s ’ allume. : le t é moin clignote.
9- FR Installation de l’appar eil Avant d ’ utiliser l ’ appareil, suivez les directives ci-dessous. Si la fiche du c â ble modem exclusif ne convient pas à la prise t é l é phonique, connectez un adaptateur de fiche correspondant (en option).
10- FR x Utilisation de l’adaptateur secteur fourni Branchez l ’ adaptateur secteur sur la prise DC IN de l ’ appareil et sur une prise murale (secteur). Remarques • L ’ appareil doit ê tre plac é aussi pr è s que possible de la prise murale et celle-ci doit ê tre facilement accessible.
11- FR Préparation de l’appar eil Certains param è tres doivent ê tre r é gl é s avant que l ’ appareil puisse ê tre connect é à la ligne t é l é phonique. Choisissez les param è tres correspondant au mode de num é rotation de votre t é l é phone.
12- FR Vérification de la vitesse de numérotation d’un téléphone à numérotation par impulsions Il est possible de modifier la vitesse de num é rotation de certains t é l é phones à num é rotation par impulsions.
13- FR Jusqu ’à 16 p é riph é riques Bluetooth peuvent ê tre enregistr é s dans cet appareil. Pour l ’ enregistrement d ’ un p é riph é rique Bluetooth, reportez-vous à son mode d ’ emploi. Avant de pouvoir enregistrer un 17e p é riph é rique, vous devez effacer tous les enregistrements pr é c é dents.
14- FR Enregistrement d’un 17e périphérique Bluetooth Pour que l ’ enregistrement d ’ un 17e p é riph é rique Bluetooth soit possible, tous les enregistrements pr é c é dents doivent ê tre effac é s. Pour effacer tous les enregistrements, appuyez sur la touche CLEAR avec un objet pointu.
15- FR Communication avec un périphérique Bluetooth L ’ enregistrement d ’ un p é riph é rique Bluetooth vous permet de communiquer avec celui-ci. ( 1 ) R é glez le commutateur POWER ON/OFF sur ON. Les t é moins s ’ allument tel que d é crit ci-dessous.
16- FR Dépannage Si vous constatez des probl è mes de fonctionnement de l ’ appareil, v é rifiez d ’ abord les sympt ô mes et rem è des ci-dessous. Si votre appareil continue de mal fonctionner, consultez votre revendeur Sony ou le centre d ’ entretien Sony agr éé le plus proche.
17- FR Communication Sympt ô me Cause et solution • La carte modem exclusive n ’ est pas ins é r é e correctement. c Ins é rez la carte correctement. Reportez-vous à la section « Pr é paration de l ’ appareil » à la page 9. • Les piles sont compl è tement à plat.
18- FR Spécifications Communication sans fil Syst è me de communication Sp é cification Bluetooth Ver. 1.1 Vitesse de communication maximale 1) 2) 723 kbps environ Sortie maximale 3) Sp é cificati.
.
Sony Corporation Printed in Japan 307012411.
デバイスSony BTA-NW1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony BTA-NW1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony BTA-NW1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony BTA-NW1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony BTA-NW1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony BTA-NW1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony BTA-NW1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony BTA-NW1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony BTA-NW1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
