SonyメーカーCDP-CE515の使用説明書/サービス説明書
ページ先へ移動 of 28
3-859-179- 11 (1) 1997 by Sony Corporation CDP-CE515 CDP-C460Z Operating Instructions.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.
Getting Started 3 Getting Started Unpacking ............................................................................................................................. 4 Hooking Up the System .........................................................
Getting Started 4 Unpacking Check that you received the following items: • Audio connecting cord (1) • Remote commander (remote) (1) • Sony SUM-3 (NS) batteries (2) Inserting batteries into the remote You can control the player using the supplied remote.
Getting Started Getting Started 5 Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.
Getting Started 6 What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • CONTROL A1 cord (1) (not supplied) 1 Connect the players with an audio cord (see also “ Hookups ” on page 5). 2 Connect the players with a CONTROL A1 cord.
Getting Started Getting Started 7 4 Connect the AC power cord of both players to AC outlets. Notes • Do not connect a player other than that you use as the second player to the 2ND CD IN jacks of this player. • When connecting a second CD player, do not connect the DIGITAL OUT (OPTICAL) connector of this unit to the amplifier.
Basic Operations 8 1 2 3 Playing a CD 25 With the label side up Disc number 4 5 • See pages 4 – 5 for the hookup information. Turn on the amplifier and select the CD player position so that you can listen to the sound from this player. Press POWER to turn on the player.
Basic Operations Basic Operations 9 6 Press · . The disc tray closes and the player plays all the tracks once (Continuous Play). Adjust the volume on the amplifier. You can select the disc you want to start playing first Press one of the DISC 1 – 5 buttons.
Playing CDs 10 Using the Display You can check information about the disc using the display. Playing CDs CDP-CE515 Checking the total number and playing time of the tracks Press TIME/TEXT before you start playing. The display shows the current disc number, the total number of tracks, total playing time and music calendar.
Playing CDs Playing CDs 11 Checking the information of CD-TEXT discs CD-TEXT discs have information, such as the disc titles or artist names, memorized in a blank space on the discs where there is no information on normal discs.
Playing CDs 12 Replacing Discs While Playing a Disc You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting playback of the current disc. Locating a Specific Disc You can locate any disc before or while playing a disc.
Playing CDs Playing CDs 13 You can extend the playing time during scanning the discs Press DISC CHECK repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.
Playing CDs 14 Playing in Random Order (Shuffle Play) You can have the player “ shuffle ” tracks and play in a random order. The player shuffles all the tracks on all discs or on the disc you ’ ve specified. SHUFFLE Shuffle Play on all discs You can play all tracks on all discs in a random order.
Playing CDs Playing CDs 15 To cancel Shuffle Play Press CONTINUE. You can start Shuffle Play while playing Press SHUFFLE, and Shuffle Play starts from the current track.
Playing CDs 16 The program remains even after the Program Play ends When you press the · button, you can play the same program again. The program remains until you erase it or turn off the player If you replace discs, the programmed disc and track numbers remain.
Playing CDs Playing CDs 17 6 Press ENTER to select the track. 7 To program other discs or tracks, do the following: To program Other discs Other tracks on the same disc Other tracks on other discs 8 Press · to start Program Play. To cancel Program Play Press CONTINUE.
Playing CDs 18 To Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track You need to Press P Press p Turn ≠ AMS (DISC) ± until the display shows the dis.
Playing CDs Playing CDs 19 3 Press · to start playing. The MEGA CONTROL button lights up while the track in the second player is selected. To cancel No-Delay/X-Fade Play Press the corresponding button repeatedly until the button goes off. The current player continues playing.
Recording From CDs 20 Recording From CDs Recording Y our Own Pr ogram You can record the program you ’ ve created on a tape, etc. The program can contain up to 32 steps. By inserting a pause during programming, you can divide the program into two for recording on both sides of a tape.
Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs 21 Recording From CDs F ading In or Out You can manually fade the sound in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector.
Recording From CDs 22 Adjusting the Recording Level (Peak Sear ch) (CDP-CE515 only) The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording. 1 Before you start playing, press PEAK SEARCH.
Locating a Scene or Track You Want 23 Locating a Scene or Track You Want Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) Storing Information About CDs (Custom.
Storing Information About CDs (Custom Files) 24 Labeling discs using the remote Z 1 Press CAPS. 2 Press the number button of the disc you want to assign a Disc Memo, and then ENTER. 3 Press MEMO INPUT. The flashing cursor ( “ ) appears. 4 Press CAPS to find the letter type you want.
Locating a Scene or Track You Want 25 Locating a Scene or Track You Want Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) Storing Specific T racks (Delete Bank) You can delete unwanted tracks and store only the tracks you want.
Additional Information 26 Additional Information Notes on CDs On handling CDs • To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Additional Information Additional Information Additional Information 27 Specifications Compact disc player Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Laser output Max 44.6 µ W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture.
Index 28 Index A, B AMS 13 Automatic Music Sensor. See AMS C, D CD-TEXT 11 Connecting 4 another CD player 6 Continuous Play 8 Controlling another CD player 18 X-Fade Play 19 Custom Files Delete Bank 25 Disc Memo 23 what you can do with 23 E Editing.
デバイスSony CDP-CE515の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony CDP-CE515をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CDP-CE515の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CDP-CE515の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CDP-CE515で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CDP-CE515を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CDP-CE515の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CDP-CE515に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CDP-CE515デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
