SonyメーカーCFD-CD777S MK2の使用説明書/サービス説明書
ページ先へ移動 of 56
CD Radio Cassette-Cor der 3-260-754- 11 (1) © 2003 Sony Corporation CFD-CD777S MK2 GB Operating Instructions page 2 GB.
2 GB Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Basic Operations 3 GB T able of contents Basic Operations Playing a CD .................................................. 4 Listening to the radio ...................................... 6 Playing a tape ................................................
4 GB For hookup instructions, see pages 19 – 20. 1 Set FUNCTION to CD. 2 Press Z PUSH OPEN/CLOSE down to open the lid of the CD compartment and place a CD on the CD compartment.
Basic Operations 5 GB Use these buttons for additional operations Display Playing time Track number x To Do this adjust the volume Turn VOLUME. stop playback Press x . pause playback Press u . (On the remote, press X .) Press the button again to resume play after pause.
6 GB Listening to the radio For hookup instructions, see pages 19 – 20. 1 Set FUNCTION to RADIO. 2 Set BAND to select the band you want. 3 Turn TUNING to tune in the station you want.
Basic Operations 7 GB Use these buttons for additional operations To Do this adjust the volume Turn VOLUME . turn off the radio Set FUNCTION to TAPE• CD/ RADIO OFF. To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for MW.
8 GB Playing a tape For hookup instructions, see pages 19 – 20. 1 Set FUNCTION to TAPE•CD/ RADIO OFF. 2 Press xZ to open tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 3 Press PLAY N . The player starts playing.
Basic Operations 9 GB Use these buttons for additional operations To Do this adjust the volume Turn VOLUME. stop playback Press xZ . fast-forward or rewind the tape Press m or M . pause playback Press X . Press the button again to resume play after pause.
10 GB Recording on a tape For hookup instructions, see pages 19 – 20. 1 Press xZ to open the tape compartment on deck B and insert a blank tape. Use TYPE I (normal) tape only. Close the compartment. 2 Select the program source you want to record. To record from the CD player, set FUNCTION to CD and insert a CD (see page 4).
Basic Operations 11 GB 3 Start recording. Press z on deck B ( N is depressed automatically). Use these buttons for additional operations Notes • During recording, do not press M , m or PLAY on deck A as this causes excessive wow and flutter.
12 GB Dubbing For hookup instructions, see pages 19 – 20. 1 Insert a recorded tape into deck A and a blank tape into deck B. Use TYPE I (normal) tape only. Close the compartment. 2 Set FUNCTION to DUBBING. 3 To dub at high speed, press HIGH SPEED DUBBING to ON.
Basic Operations 13 GB 4 Press X and then press PLAY on deck A. 5 Start dubbing. Press z on deck B ( N is depressed automatically). Use these buttons for additional operations Note During dubbing, do not set FUNCTION or press HIGH SPEED DUBBING as this causes excessive wow and flutter.
14 GB The CD Player Using the display You can check information about the CD using the display. Total playing time Total track number DISPLAY Checking the total track number and playing time Press DISPLAY (DISPLAY/ENTER on the player) in stop mode. Locating a specific track You can quickly locate any track using the number buttons.
The CD Player 15 GB Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 16). 1 Set FUNCTION to CD on the player. 2 Proceed as follows: To repeat a single track all the tracks tracks in random order programed tracks MODE Do this 1 Press MODE until “REP 1” appears.
16 GB 1 Set FUNCTION to CD on the player. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press N to start program play. Creating your own program (Program Play) You can arrange the playing order of up to 20 tracks on a CD.
The Tape Player 17 GB The Tape Player Recording through a microphone/Using as a PA system You can record sound using a microphone (not supplied) or use the player as a public address system. Recording through a microphone 1 Plug the microphone into the MIX MIC jack and turn on the microphone if it has a power switch.
18 GB The Audio Emphasis Selecting the audio emphasis (DYNAMIC SOUND SYSTEM) You can select the audio emphasis of the sound you are listening to. Using the 5 BAND GRAPHIC EQUALIZER Slide 5 BAND GRAPHIC EQUALIZER to select the audio emphasis you want.
Setting Up 19 GB Setting Up Choosing the power sources You can use the AC power or batteries as a power source. 1 Hooking up the speakers 1 Align the grooves and slide the speaker box down until it snaps into place A.
20 GB 2 Connecting the AC power cord Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. Adjusting the voltage Be sure to set the VOLTAGE SELECTOR (at the rear) to your local power supply.
Setting Up 21 GB Connecting optional components You can enjoy the sound from a TV or VCR through the speakers of this player. Be sure to turn off the power of each equipment before making connections, and set FUNCTION to TAPE•CD/RADIO OFF. For details, refer to the instruction manual of the component to be connected.
22 GB Additional Information Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing.
23 GB Notes on cassettes • Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape. • The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback.
24 GB Radio The audio is weak or has poor quality. • Replace all the batteries with new ones if they are weak. • Move the player away from the TV. • If you are using the remote while listening to MW radio, noise may be heard. This is unavoidable.
25 GB Remote The remote does not function. • Replace all the batteries in the remote with new ones if they are weak. • Make sure that you are pointing the remote at the remote sensor on the player. • Remove any obstacles in the path of the remote and the player.
26 GB Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer.
27 GB Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.
28 GB Index A Audio emphasis 18 B BALANCE 18 Batteries for player 20 for remote 20 C CD player 14 Choosing power sources 19 Cleaning cabinet 26 lens 26 tape heads and tape path 26 Connecting AC power .
AR .
AR .
AR .
AR • .
AR • .
AR • A .
AR • .
AR FUNCTION TV/LINE IN .
AR ,.
AR .
AR BALANCE PRESET MODE 5 BAND GRAPHIC EQUALIZER (DYNAMIC SOUND SYSTEM) .
AR MIX MIC FUNCTION z .
AR .
AR .
AR .
AR xZ xZ X PLAY A .
AR − .
AR xZ X n xZ X xZ B .
AR MIC − , .
AR DIRECTION h H DIR MODE VOLUME xZ X m , M m , M X xZ.
AR − , .
AR FM MW VOLUME FUNCTION SW .
AR − , .
AR u N .
AR .
AR AR .
AR , .
AR AR © 2003 Sony Corporation CFD-CD777S MK2 CD Radio Cassette-Cor der.
デバイスSony CFD-CD777S MK2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony CFD-CD777S MK2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CFD-CD777S MK2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CFD-CD777S MK2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CFD-CD777S MK2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CFD-CD777S MK2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CFD-CD777S MK2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CFD-CD777S MK2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CFD-CD777S MK2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
