SonyメーカーCFD-V35の使用説明書/サービス説明書
ページ先へ移動 of 28
Sony Corporation Printed in China.
3-861-414- 11 (1) CD Radio Cassette-Cor der 1998 by Sony Corporation Operating Instructions CFD-V35.
Introduction 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 Introduction Basic Operations T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player 12 Using the display 13 Locating a spe.
Basic Operations 4 Playing a CD Basic Operations Connect the supplied AC power cord (see page 18). 1 Press 6 PUSH•OPEN/CLOSE down to open the CD compartment and place a CD on the CD compartment. 2 Close the CD compartment. 3 Press ^ (direct power-on).
Basic Operations Basic Operations 5 6 PUSH•OPEN/CLOSE p ^ VOL +/– Use these buttons for additional operations = / + To Press Adjust the volume VOL +/– Stop playback p Pause playback ^ Press again to resume play after pause.
Basic Operations 6 Listening to the radio Connect the supplied AC power cord (see page 18). 1 Press FM or AM (direct power- on). 2 Turn TUNING to tune in a radio station.
Basic Operations Basic Operations 7 Use these buttons for additional operations To Press Adjust the volume VOL +/– Turn on/off the radio POWER To improve broadcast reception Reorient the antenna for FM.
Basic Operations 8 Playing a tape Connect the supplied AC power cord (see page 18). 1 Press p6 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 2 Press ( . The player turns on (direct power-on) and starts playing.
Basic Operations Basic Operations 9 Use these buttons for additional operations P p6 0/) To Press Adjust the volume VOL +/– Stop playback p6 Fast-forward or rewind the tape ) or 0 for the side facing upward. Pause playback P Press the button again to resume play after pause.
Basic Operations 10 Connect the supplied AC power cord (see page 18). 1 Press p6 to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. To record from the CD player, press CD and insert a CD (see page 4).
Basic Operations Basic Operations 11 Use these buttons for additional operations 3 Press r to start recording. ( ( is depressed automatically). P p6 To Press Stop recording p6 Pause recording P Press the button again to resume recording.
The CD Player 12 Using the display You can check information about the CD using the display. The CD Player Checking the total track numbers and playing time Check the display in stop mode. Checking the remaining time Press DISPLAY/ENTER while playing a CD.
13 The CD Player The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a specific point in a track while playing a CD. To locate Press a specific track directly a number button of the track.
The CD Player 14 Playing tracks r epeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 16). MODE ( 1 Press CD. 2 Press MODE (PLAY MODE on the player) repeatedly until the repeat mode you want appears in the display.
15 The CD Player The CD Player Playing tracks in random or der (Shuffle Play) You can play tracks in random order. 1 Press CD. 2 Press MODE repeatedly until “SHUF” appears in the display. 3 Press ( to start shuffle play. To cancel Shuffle Play Press MODE until “SHUF” disappears from the display.
The CD Player 16 Cr eating your own pr ogram (Program Play) You can arrange the playing order of up to 20 tracks on a CD. On the player 1 Press CD. 2 Press PLAY MODE until “PGM” appears in the display. 3 Press the = or + then press DISPLAY/ENTER for the tracks you want to program in the order you want.
17 The CD Player The CD Player To cancel Program Play Press MODE until “PGM” disappears from the display. To check the order of tracks before play Press DISPLAY/ENTER. Every time you press the button, the track number appears in the programed order.
Setting Up 18 Choosing the power sour ces You can use the AC power or batteries as a power source. Use the AC power source whenever you record since recording consumes much power.
19 Setting Up Setting Up Adjusting the sound emphasis (Sound Mode/MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Selecting the sound characteristic Press one of the PRESET SOUND MODE buttons to select the audio emphasis you want.
Additional Information 20 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined or unstable place.
21 Additional Information Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Additional Information 22 T r oubleshooting Remedy • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate the player on batteries.
23 Additional Information After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer.
Additional Information 24 Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available blower.
25 Additional Information Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 150 - 10,000 Hz; rated 2 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
Additional Information 26 Index A Adjusting sound emphasis 19 B Batteries for player 18 for remote 18 C CD player 12 Choosing power sources 18 Cleaning cabinet 24 tape heads and tape path 24 Creating .
27 Additional Information.
デバイスSony CFD-V35の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony CFD-V35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CFD-V35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CFD-V35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CFD-V35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CFD-V35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CFD-V35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CFD-V35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CFD-V35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
