SonyメーカーCMT-CP500MDの使用説明書/サービス説明書
ページ先へ移動 of 56
Micr o Hi-Fi Component System © 2001 Sony Corporation Operating Instructions 4-233-759- 13 (3) CMT -CP500MD Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Parts Identification Main unit ........................................................ 4 Remote control ............................................... 5 Getting Started Hooking up the system .................................. 6 Inserting two size-AA (R6) batteries into the remote control .
4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses () for details. Main unit BASS wd (40) CD EJECT Z qh (8, 9, 16, 50) CD x qj (9, 10, 17,.
Parts Identification 5 Remote control BASS/TRE 5 (40) CD qj (9 – 11) CLEAR 8 (10, 14, 15, 25, 36) CLOCK/TIMER SELECT 2 (42, 43) CLOCK/TIMER SET 4 (7, 41, 42) CURSOR T / t 9 (7, 12, 25) DISPLAY wa (8.
6 Jack type A FM 75 Ω AM U ANTENNA Jack type B F M 7 5 Ω AM ANTENNA U U Getting Started Hooking up the system Follow steps 1 through 4 of the procedure below to hook up your system using the supplied cords and accessories. AM loop antenna Left speaker Right speaker FM antenna 1 Connect the speakers.
7 Getting Started 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 1 10V~120V 220V~240V VOL T AGE SELECTOR 4 Connect the power cord to a wall outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).
8 CD Loading the CD 1 Press CD EJECT Z . The disc tray slides out. 2 Load a CD onto the disc tray. 3 Press CD EJECT Z again to close the disc tray. Notes • The disc cannot be viewed through the front window when a CD single (8 cm CD) is loaded. • The characters printed on the disc appear upside down when viewed through the front window.
9 CD Other operations To Do this Stop playback Press CD x . Pause Press CD u (or X on the remote). Press again to resume playback. Select a track During playback or pause, press . or > repeatedly until you find the desired track. Find a point in a track During playback, press and hold down m or M until you find the desired point.
10 5 To program additional tracks, repeat steps 3 and 4. 6 Press CD u (or N on the remote). To Check the program order Check the total number of programed tracks Cancel Program Play Add a track to the.
11 CD Using the CD display Press DISPLAY on the remote repeatedly. When a CD TEXT disc is loaded, you can check the information recorded on the disc, such as the titles.
12 4 Enter a character. If you have selected uppercase or lowercase letters 1 Press the corresponding letter button repeatedly until the character to be entered flashes. Or, press the button once and press . or > on the remote repeatedly. 2 Press CURSOR t on the remote.
13 MD — Play With the arrow pointing toward the deck With the label side up, and the shutter on the righthand side MD — Play Loading the MD Load an MD. Playing the MD — Normal Play/Shuffle Play/Repeat Play This system lets you play MDs in different play modes.
14 Programing the MD tracks — Program Play You can make a program of up to 25 tracks on an MD in any order that you want. 1 Press FUNCTION repeatedly until “MD” appears in the display. You can switch the function to MD by pressing the MD button on the remote.
15 MD — Play 5 To program additional tracks, repeat steps 3 and 4. 6 Press MD u (or N on the remote). To Do this Select the desired track using the number buttons on the remote Press . or > repeatedly during Program Play. Press DISPLAY on the remote in stop mode.
16 MD — Recording Before you start recording MDs (Mini Disc) let you digitally record and play music with high quality sound. Another feature of MDs is track marking. The track marking feature lets you quickly locate a specific point or easily edit the recorded tracks.
17 MD — Recording Recording a CD on an MD — CD-MD Synchro Recording 1 Load a recordable MD. 2 Load a CD on the disc tray. 3 Press SYNCHRO REC repeatedly until “CD-MD SYNC” appears in the display. 4 Press ENTER/START. “Press START” flashes in the display.
18 Notes • You cannot pause recording during CD-MD High- Speed Synchro Recording. • If the play mode is set to the Repeat or Shuffle Play, it automatically switches to normal play at step 3 of “Recording a CD on an MD”.
19 MD — Recording Recording on an MD manually — Manual Recording With manual recording, you can record just the portions you like from a CD, or start recording from the middle of the tape. You can also record a radio program. 1 Load a recordable MD.
20 5 Press ENTER/YES on the remote at the desired point to start recording. To stop Time Machine Recording Press MD x . Note The MD deck starts storing audio data when the deck stands by for recording in step 3 and you start playing the source.
21 MD — Recording To add “LP:” at the beginning of a track name during MDLP recording “LP:” appears when you try to play the track on a system that does not support MDLP mode. This convenient function lets you know at a glance that the track cannot be played back.
22 Recording tips (continued) No sound input for less than 30 seconds No sound input for 30 seconds or more To change the trigger level for Level Synchro Recording Perform the following procedure to change the signal level that triggers Level Synchro Recording.
23 MD — Recording 1 Press FUNCTION repeatedly until “MD” appears in the display. 2 Press MENU/NO on the remote repeatedly until “Setup Menu” appears in the display. 3 Press . or > on the remote repeatedly until “S.Space Off” (or “S.
24 MD — Editing Before you start editing Before editing You can edit an MD only when: • The MD is recordable. • The MD play mode is normal play. Check the following, before editing. 1 Check the tab of the MD to be edited. If the MD is record protected, “C11” and “Protected” appear alternately and the MD cannot be edited.
25 MD — Editing After recording Use Name Function on page 24. You can input a total of approximately 1700 characters for the disc title and track titles on a single MD. 1 Press MD on the remote to switch the function to MD. To label a track, press .
26 Checking the titles To check the disc titles, press SCROLL on the remote in stop mode. To check the track title, press SCROLL on the remote during play. The title appears scrolling in the display. To stop scrolling, press SCROLL on the remote. Press the button again to resume scrolling.
27 MD — Editing Erasing recordings — Erase Function The MD deck lets you erase unwanted tracks quickly and easily. The three options for erasing recordings are: • Erasing a single track (Track E.
28 6 Repeat step 5 until point A is played correctly. 7 Press ENTER/YES on the remote if point A is correct. “Point B set” appears and playback for setting the ending point of the portion to be erased (point B) starts. 8 Continue playback until the deck reaches point B, then press ENTER/ YES on the remote.
29 MD — Editing Moving recorded tracks — Move Function You can use this function to change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered. Example: Moving track 3 to position 2. 12 3 1 23 4 4 AB C D CB D A 1 Press MD on the remote to switch the function to MD.
30 Combining recorded tracks — Combine Function You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers.
31 MD — Editing 4 Press . or > on the remote repeatedly until the first track number of the two to be combined appears, then press ENTER/YES on the remote. For example, to combine tracks 4 and 1, select 4. 5 Press . or > on the remote repeatedly until the second track number of the two to be combined appears.
32 6 Press . or > on the remote repeatedly to select the track number you want to change the recording level of, then press ENTER/YES on the remote. “Level 0dB” appears. 7 While monitoring the sound, press . or > on the remote repeatedly to change the recording level.
33 MD — Editing 4 Press . or > on the remote repeatedly until “ S.F Edit ? ” appears in the display, then press ENTER/YES on the remote. 5 Press . or > on the remote repeatedly until “ Fade In? ” or “ Fade Out? ” appears in the display, then press ENTER/YES on the remote.
34 Tuner Presetting radio stations The system can store a total of 30 preset stations (20 for FM and 10 for AM). 1 Press TUNER BAND to select FM or AM. 2 Press TUNING MODE repeatedly until “AUTO” appears in the display. 3 Press TUNING – or +. The frequency changes as the system scans for a station.
35 Tuner Listening to the radio — Preset Tuning Presetting radio stations in the system’s memory in advance make it easy to tune in those stations later (see “Presetting radio stations” on page 34). 1 Press TUNER BAND to select FM or AM. 2 Press TUNING MODE repeatedly until “ PRESET ” appears in the display.
36 Labeling the preset stations — Station Name You can label each preset station with up to 12 characters (Station Name). 1 Tune the desired station you want to label (see page 35). 2 Follow the same procedures as from step 2 to 6 on “ Labeling a CD ” (see page 11).
37 Tape — Play Tape — Play Loading a tape 1 Press PUSH Z . 2 Load a recorded/recordable tape into the cassette holder. Playing a tape You can use Type I (normal) tape. 1 Load a recorded tape into the cassette holder. 2 Press FUNCTION until “TAPE” appears in the display.
38 Tape — Recording Recording a CD on a tape — CD-TAPE Synchro Recording You can use Type I (normal) tape. 1 Load a recordable tape. 2 Load a CD. 3 Press SYNCHRO REC repeatedly until “CD-TAPE SYNC” appears in the display. 4 Press ENTER/START. The tape deck stands by for recording and the CD player pauses for play.
39 Tape — Play 4 Press ENTER/START. The tape deck stands by for recording and the MD deck pauses for play. When you want to record on the reverse side, press TAPE nN so that “ n ” appears in the display. 5 Press PLAY MODE DIRECTION repeatedly until appears to record on one side or (or ) to record on both sides.
40 Timer Falling asleep to music — Sleep Timer The Sleep Timer Function lets you specify a sleep time, after which the system stops playing and turns off automatically.
41 Sound Adjustment/Timer W aking up to music — Daily Timer By setting the Daily Timer, you can make the system automatically turn on and off at specified times. To use this function, make sure that you have set the system clock correctly (see “Setting the time” on page 7).
42 T imer r ecording radio programs To timer-record, make sure that you have set the system clock correctly (see “Setting the time” on page 7) and preset the radio station (see “Presetting radio stations” on page 34). 1 Tune in the desired preset radio station (see “Listening to the radio” on page 35).
43 Sound Adjustment/Timer 8 Press @ / 1 to turn off the system. Do this Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly until “MD REC?” or “TAPE REC?” appears in the display, then press ENTER/YES on the remote.
44 Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.
45 Additional Information • With the following kinds of CDs, you may experience a reading failure or noise when recorded on an MD: — CDs with adhesive labels attached to them. — Irregularly shaped CDs (for example, heart- or star- shaped). — CDs with printed text concentrated on one side only.
46 System limitations of MDs The recording system in your MD deck has the limitations described below. Note, however, that these limitations are due to the inherent nature of the MD recording system itself, not to mechanical causes.
47 Additional Information Guide to the Serial Copy Management System Digital audio components, such as CDs, MDs, and DATs let you copy music easily with high quality by processing music as a digital signal.
48 Troubleshooting (continued) The timer does not function. • Press CLOCK/TIMER SELECT on the remote and light up “ c DAILY” or “ c REC” in the display (see pages 41 and 42). • Check the set contents and set the correct time (see page 7). • Cancel the Sleep Timer function (see page 40).
49 Additional Information Play does not start from the first track. • Press PLAY MODE DIRECTION (or PLAY MODE on the remote) repeatedly until “PGM” or “SHUFFLE” disappears to return to normal play. “ OVER ” appears. • Press and hold m or press .
50 Optional components There is no sound. • Refer to General item “There is no sound” on page 47 and check the condition of the system. • Connect the component properly (see page 43) while checking: – if the cords are connected properly. – if the cord plugs are firmly inserted all the way.
51 Additional Information Self-diagnosis display This system has a Self-diagnosis display function to let you know if there is a system malfunction. The display shows a code made up of three letters and a message alternately to show you the problem. To solve the problem refer to the following list.
52 Self-diagnosis display (continued) Disc Full! There is no time remaining on the MD. Eject The MD deck is ejecting the MD. Impossible • You tried to make an impossible editing operation. • You cannot combine or erase the tracks due to the system limitations of MDs.
53 Additional Information TUNER Cannot Edit You tried to label or erase a non-preset station. CD Cannot Edit You tried to label a CD TEXT disc. CD No Disc There is no CD in the player. Name Full There are already 50 disc titles stored in the system. OVER You have reached the end of the CD while keeping pressing M during play or pause.
54 Specifications (continued) Inputs ANALOG IN (phono jacks): Sensitivity 250 mV, impedance 47 kilohms DIGITAL OPTICAL IN (Supported sampling frequencies: 32 kHz, 44.
55 Additional Information General Power requirements North American model: 120 V AC, 60 Hz European model: 230 V AC, 50/60 Hz Australian and Hong Kong model: 220 – 240 V AC, 50/60 Hz Other models: 110 – 120 V or 220 – 240 V AC , 50/60 Hz Adjustable with voltage selector Power consumption European model: See the nameplate 0.
Sony Corporation Printed in Korea.
デバイスSony CMT-CP500MDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony CMT-CP500MDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CMT-CP500MDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CMT-CP500MDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CMT-CP500MDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CMT-CP500MDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CMT-CP500MDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CMT-CP500MDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CMT-CP500MDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
