SonyメーカーHK-PSU01の使用説明書/サービス説明書
ページ先へ移動 of 16
SIGNAL PROCESSING UNIT PFV-SP3100 BACKUP POWER SUPPLY UNIT HK-PSU01 INST ALLA TION MANUAL 1st Edition Serial No. 10001 and Higher (PFV -SP3100) Serial No.
PFV -SP3100 ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
1 (E) PFV -SP3100 Table of Contents Manual Structure Purpose of this manual ........................................................................................ 2 (E) Related manuals ................................................................
2 (E) PFV -SP3100 Manual Structure Purpose of this manual This manual is the installation manual of Signal Processing Unit PFV-SP3100 and its Backup Power Supply Unit HK-PSU01. This manual is intended for use by trained system and service engineers, and describes the information for installation of the unit.
1-1 (E) PFV -SP3100 Section 1 Installation 1-1. Operating Environment Operating temperature + 5 d C to + 40 d C Performance temperature + 10 d C to + 35 d C Humidity 10 to 90 % (No condensation) Mass: PFV-SP3100 Approx. 8.5 kg (Without the optional unit and board) HK-PSU01 Approx.
PFV -SP3100 1-2 (E) 1-3. Installation Space m . Do not block the ventilation holes of the unit. . Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte- nance. The outer dimensions of PFV-SP3100 are as shown here: 1-3.
1-3 (E) PFV -SP3100 1-4. Installing/Removing Optional Power Supply Unit w Before installing the backup power supply unit HK-PSU01 in PFV-SP3100, set the power switch of HK-PSU01 to the “O” position (OFF). Otherwise, deterioration of a connector which connects HK-PSU01 to PFV-SP3100 may cause a fire.
PFV -SP3100 1-4 (E) 1-5. Installing Optional Board 1-5. Installing Optional Board The optional board can be installed in any empty slot of PFV-SP3100. When installing the processing module controller, the No.4 slot is used as the master slot and the No.
1-5 (E) PFV -SP3100 Board lever Main board 2 6. Reinstall the board retainer. 7. Reinstall the front panel. n When removing the main board, turn the board lever in the direction of the arrow 2 , and pull out the board toward you. Installing Connector Panel (Rear side) The connector panel must be installed to the slot which contains the main board.
PFV -SP3100 1-6 (E) 1-6. Rack Mounting n Install a ventilating fan in the rack to prevent the increase in the temperature inside a rack when multiple units are put in one rack. 1-6-2. Rack Mounting Procedure Explains the procedure for rack mounting by Rack Mount Kit RMM-10.
1-7 (E) PFV -SP3100 n The maximum depth of an adaptor is 750 mm. The minimum depth of an adaptor is 595 mm. 3. Firmly lay the right and left adaptors in the rack with the specified six screws. (Following figure is case of left side.) 4. Fasten the length adjustment screws which are loosened in step 2.
PFV -SP3100 1-8 (E) 1-7. Matching Connector/Cable When external cables are connected to the connectors on the PFV-SP3100 rear panel, the hardware listed below (or the equivalent) must be used.
2-1 (E) PFV -SP3100 Section 2 Service Overview 2-1. Cleaning the Filter w Be sure to turn off the power switch and disconnect the power cord from the outlet before starting any work. c . The temperature inside the unit increases if dust adheres to the filter and the ventilation holes are blocked.
.
PFV -SP3100 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual o.
Printed in Japan Sony Corporation 2002. 7 22 B&P Company ©2002 PFV -SP3100 (SY) J, E 3-690-471-01.
デバイスSony HK-PSU01の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony HK-PSU01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony HK-PSU01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony HK-PSU01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony HK-PSU01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony HK-PSU01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony HK-PSU01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony HK-PSU01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony HK-PSU01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。