SonyメーカーICD-B15の使用説明書/サービス説明書
ページ先へ移動 of 48
3-230-616- 11 (1) IC Recor der 2001 by Sony Corporation ICD-B10/B15 Operating Instructions.
2 GB For the customers in the United States Owner’s Record The model number is located at the rear and the serial number is located inside the battery compartment. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
3 GB Table of Contents Before Y ou Begin What is an IC recor der? ................................................................................ 4 Features .............................................................................................
4 GB B Before You Begin What is an IC recorder? This IC recorder enables you to record and play back oral messages in the built-in IC memory. z Recording When a new message is recorded, it is automatically added after the last recorded messages.
5 GB Features • Maximum recording time ICD-B10: 63 min. (SP)/168 min. (LP) ICD-B15: 127 min. (SP)/339 min. (LP) This unit is suitable for recording long meetings or lectures.
6 GB B Getting Started Step 1: Installing the Batteries 1 Slide and lift the battery compartment lid. 2 Insert two LR03 (size AAA) alkaline batteries with correct polarity, and close the lid. If the battery compartment lid is accidentally detached, attach it as illustrated.
7 GB Replacing the batteries The battery indicator on the display window shows the battery condition. When flashes, replace the batteries with new ones. When flashes, the batteries are exhausted and the unit will stop operation. Battery life* With continuous use, approx.
8 GB You need to set the clock to use the alarm or timer setting function. Clock setting display appears when you insert batteries for the first time, or when you insert batteries after the unit has been without batteries for a certain period of time.
9 GB 4 Set the time. 1 Press . or > to select the digits of the hour. 2 Press Nx PLAY/ STOP. The minute digits will flash. 3 Set the minute. 5 Press Nx PLAY/STOP at the time signal. The display will return to “SET DATE”. 6 Press MENU to exit the menu mode.
10 GB B Basic Operations Recording Messages You can record up to 99 messages in each of three folders (A, B, or C) for ICD-B10 or five folders (A, B, C, D or E) for ICD-B15. Since a newly recorded message is automatically added behind the last recorded message, you can start recording quickly without searching for the end of the last recording.
Basic Operations 11 GB Stop r ecording . Press z REC/STOP again. The unit stops at the beginning of the current recording. x STOP If you do not change the folder after you stop recording, the next time you record you will record in the same folder. To stop recording You can also stop recording by pressing x STOP instead of z REC/STOP.
12 GB Recording Messages (continued) Recording Messages (continued) To select the microphone sensitivity See page 36. Maximum recording time With the ICD-B10, you can record for up to 63 minutes in SP (standard play) mode and 168 minutes in LP (long play) mode.
Basic Operations 13 GB Various Ways of Recording Starting recording automatically in response to the sound — Advanced VOR function When the VOR (voice operated recording) function is set to ON (page 36), recording starts when the recorder detects sound and stops when no sound is heard.
14 GB * The display selected with the DISPLAY button (page 34) appears. Playing Back Messages Playing Back Messages When playing back a previously recorded message, start from Step 1. When playing back a message you have just finished recording, start from Step 3.
Basic Operations 15 GB Start playback. After playing back one message, the unit stops at the beginning of the next message. When the last message on a folder has been played back, the unit stops at the beginning of the last message. For private listening Connect an earphone or headphones (not supplied) to the EAR jack.
16 GB Playing Back Messages (continued) Playing Back Messages (continued) Other operations To Do this go back to the beginning Press . once.*** of the current message** skip to the next message** Press > once.*** go back to previous Press . or > repeatedly.
Basic Operations 17 GB Searching forward/backward during playback (Cue/Review) To search forward, keep > pressed during playback and release the button at the point you wish to resume playback. To search backward, keep . pressed during playback and release the button at the point you wish to resume playback.
18 GB Playing Back the Specified Section Repeatedly — A-B Repeat While playing back a message, you can set the start (A) and end (B) points for a section you wish to play repeatedly. 1 During playback, press A-B REPEAT briefly. The starting point (A) of the section you wish to play repeatedly is set.
Basic Operations 19 GB Erasing Messages You can erase the recorded messages one by one or all messages in a folder at a time. Note that once a recording has been erased, you cannot retrieve it. Erasing messages one by one When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages.
20 GB Erasing all messages in a folder 2 While pressing x STOP, press ERASE for more than 1 second. “ ALL ERASE ” will flash for 10 seconds. To cancel erasing Press x STOP before step 3 . Erasing Messages (continued) To erase other messages Repeat steps 1 and 2 .
Editing Messages 21 GB B Editing Messages Adding a Recording Adding a Recording to a Previously Recorded Message You can add a recording to the message being played back. The added recording will be placed after the current message and counted as a part of the message.
22 GB Adding a Recording (continued) Adding an Overwrite Recording during Playback You can add an overwrite recording after the selected point in a recorded message. The part of the message after the selected point is deleted. 1 During playback, press z REC/STOP briefly.
Editing Messages 23 GB Dividing a Message into Two/ Combining Messages — Index Function You can divide a message by adding an index, or combine messages by erasing the index. While recording/playing back messages, you can add an index (see below). In stop mode, you can erase the index (see page 25).
24 GB Message 1 Message 3 Message 2 An index is added. Recording continues. Dividing a Message into Two/Combining Messages — Index Function (continued) To mark an index during recording While recording a message, press INDEX at the point you want to divide.
Editing Messages 25 GB Combining messages by erasing the index You can combine two messages into one by erasing the index. In stop mode, follow the steps below: 1 Press . or > to display the number of the second of the two messages you want to combine.
26 GB Moving Messages to a Different Folder — Move Function You can move the recorded messages to another folder. Example: Moving Message 3 in Folder A to Folder C 1 Play back the message you want to move. 2 While playing back the message, press FOLDER to flash the indication of the folder to which you want to move the message (C in this case).
Other Functions 27 GB B Other Functions Starting Recording at a Desired Time — Timer Recording You can start recording at a desired time. 1 Display the timer setting display. 1 Press MENU. The unit enters the menu mode and “ALARM” will be displayed.
28 GB Starting Recording at a Desired Time — Timer Recording (continued) 2 Set the recording start date. • to start recording on a desired date 1 Press Nx PLAY/STOP while “DATE” is flashing. 2 Press . or > to select the year digits and press Nx PLAY/STOP.
Other Functions 29 GB To stop the timer recording Press x STOP. To change the timer setting Press . or > in Step 2, 3 or 4 on page 28 to change the year, month, day or time and press Nx PLAY/STOP. To cancel the timer recording setting Select “OFF” in Steps 1- 3 on page 27 and press Nx PLAY/STOP.
30 GB Playing Back a Message at a Desired Time with an Alarm You can sound an alarm and start playback of a selected message at a desired time. You can have the message played back at a desired date, once every week, or the same time everyday. You can also sound the alarm without playing back a message.
Other Functions 31 GB 4 Set the alarm date. • to play back on a desired date 1 Press Nx while “DATE” is flashing. 2 Press . or > to select the year digits and press Nx . 3 Select the month and day digits in the same way. • to play back once a week Press .
32 GB Playing Back a Message at a Desired Time with an Alarm (continued) At the set time, the alarm will sound for about 10 seconds and the selected message will be played back. ( If “B-ONLY” was selected in Step 6, only the alarm will sound.) When the playback ends, the unit will stop automatically at the beginning of that message.
Other Functions 33 GB Preventing Accidental Operation — HOLD function Slide the HOLD switch in the direction of the arrow. “HOLD” will flash three times, indicating that all the functions of the buttons are locked. To cancel the HOLD function, simply slide the HOLD switch in the opposite direction.
34 GB Selecting the Display Mode You can select the display mode for the stop, recording and playback modes. (If the unit is left unoperated for more than 3 seconds in the stop mode, the display will show the current time, regardless of the display mode setting.
Other Functions 35 GB ALARM OFF ON DA TE SUN MON TUE WED THU FRI SA T D AIL Y DA TE SUN MON TUE WED THU FRI SA T D AIL Y MODE OFF ON TIMER SP LP BEEP ON OFF CONT OFF ON SENS HI LO V OR OFF ON EASY -S OFF ON SET D A TE B-PLA Y B-ONL Y SP LP Menu map Press MENU to enter the menu mode.
36 GB Changing the Settings Follow the menu map on page 35. 1 Press MENU to enter the menu mode. 2 Press . or > to select the item and press Nx PLAY/STOP. 3 Press . or > to select the mode and press Nx PLAY/STOP to fix the setting. z Alarm setting (ALARM) See page 30.
Additional Information 37 GB B Additional Information Precautions On power • Operate the unit only on 3 V DC. Use two LR03 (size AAA) alkaline batteries. On safety • Do not operate the unit while driving, cycling or operating any motorized vehicle.
38 GB Troubleshooting Before taking the unit for repair, check the following sections. Should any problem persist after you have made these checks, consult your nearest Sony dealer. Symptom The unit does not operate. No sound comes from the speaker. “ FULL ” is displayed and you cannot start recording.
Additional Information 39 GB Remedy •“LO”is selected in the SENS mode. Select “HI” (see page 36). •The advanced VOR function (page 13) is activated. Select “OFF” in the VOR mode. •This unit is designed to automatically adjust the recording level when recording meetings, etc.
40 GB Troubleshooting (continued) Error messages Error message “ PRE SET ” “ BACK-D ” “ NO ERASE ” “ NO DATA ” “ SET DATE ” “ ID FULL ” “ FULL ” “ ACCESS ” Cause/Remedy • You set the alarm to play back a message or set the timer to start recording at a date and time previously set on another message.
Additional Information 41 GB System limitations There are some system limitations of the IC recorder. Troubles as mentioned below are not malfunctions of the unit. Symptom You cannot record messages up to the maximum recording time. You cannot add an index.
42 GB 1 MIC (built-in microphone) (10) 2 Display window (44) 3 FOLDER button (10, 14) 4 INDEX button (23) 5 DISPLAY button (34) 6 A-B REPEAT button (18) 7 MENU button (8, 27, 30, 35, 36) 8 ERASE butto.
Additional Information 43 GB Rear ws wa w; w; PLAY SPEED selector (16) wa Battery compartment (6) ws Hook for handstrap (not supplied) Continued.
44 GB Display window 1 Alarm indicator (32) 2 Repeat play indicator (16) 3 Recording mode indication (36) 4 REC DATE (recorded date) indication (34) 5 REMAIN indicator (34) 6 Remaining memory indicator (12) 7 Folder indication (10, 14) (For ICD-B10, folders D and E do not appear.
Additional Information 45 GB Specifications Recording media Built-in flash memory, Monaural recording Recording time ICD-B10: 63 minutes (SP)/168 minutes (LP) ICD-B15: 127 minutes (SP)/339 minutes (LP) Frequency response SP: 250 Hz - 7,300 Hz LP: 300 Hz - 3,500 Hz Speaker approx.
46 GB Index A A-B repeat ...................................... 18 Accidental operation .................... 33 Add, index ..................................... 23 Add, recording .............................. 21 Advanced VOR .........................
Additional Information 47 GB R Recorded date ............................... 34 Recording ....................................... 10 Recording mode ............................ 36 Remaining memory ................ 10, 12 Remaining recording time .....
48 GB Sony Corporation Printed in Japan.
デバイスSony ICD-B15の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony ICD-B15をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony ICD-B15の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony ICD-B15の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony ICD-B15で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony ICD-B15を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony ICD-B15の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony ICD-B15に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony ICD-B15デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。