SonyメーカーMG110の使用説明書/サービス説明書
ページ先へ移動 of 40
1 Mini Hi-Fi Component System Operating Instructions 4-233-902- 12 (3) MHC-MG510A V MHC-MG310A V MHC-MG110 Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Parts Identification Main unit ............................................... 4 Remote Control ..................................... 5 Getting Started Hooking up the system .......................... 7 Inserting two size AA (R6) batteries into the remote .
4 Parts Identification 5.1CH/VIDEO (MD)* 5 (2 8 ) AUDIO IN L jack wk (29 ) AUDIO IN R jack wj (2 9) CD 5 ( 14, 21) CD SYNCH R O wh (21, 22) CLEAR w; ( 15, 19, 34) D eck A es (2 0 ) D eck B 0 (20 ) DIR.
Parts Identification 5 Remote Control For MHC-MG510AV/MG310AV qg qh ql qk qj w; 12 3 4 wa ws wd wf 6 7 8 9 5 qf 0 qd qa qs 5.1CH wa (30) CD ql (14, 21) CENTER +/– 5 (11) DBFB qd (24) DISPLAY 9 (12, .
6 Remote Control (continued) CD wf (14, 21) CLOCK/TIMER SELECT 2 (23, 27) CLOCK/TIMER SET 3 (23, 26) DBFB qg (24) DISPLAY wh (12, 17, 19) ENTER 5 (11, 15, 18, 22, 26, 28, 34) GAME 7 (26, 29) GROOVE qh (24) PLAY MODE wg (14, 22) PRESET EQ w; (24) REPEAT 8 (14) BUTTON DESCRIPTIONS @/1 (power) 4 N (play) 0 X (pause) 0 x (stop) 0 .
Parts Identification/Getting Started 7 MHC-MG510AV is the model used for illustration purpose. * MHC-MG510AV/MG310AV only ** MHC-MG510AV only continued Front speaker (Right) FM antenna AM loop antenna.
8 Hooking up the system (continued) 1 Connect the front speakers. Connect the speaker cords to the FRONT SPEAKER jacks on the unit as shown below. R L + – Insert only the stripped portion Red ( 3 ) Black ( # ) 3 Connect the center surround speaker.
Getting Started 9 Jack type B AM F M 7 5 Ω Jack type A A M FM 7 5 Ω 5 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Extend the FM antenna horizontally To connect optional components See page 28 for details. Notes • Keep the speaker cords away from the antennas to prevent noise.
10 Setting the center speaker Attach the supplied speaker pads to the bottom of the center surround speaker to stabilize the speaker and prevent it from slipping.
Getting Started 11 Adjusting the speaker volume of each speaker — Test tone 1 Press PRO LOGIC. “DOLBY PL ON” appears. 2 Press TEST TONE on the remote.
12 CD Saving the power in standby mode Press DISPLAY repeatedly while the system is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock display t Power Saving Mode Tips • ?/1 indicator lights up even in the Power Saving Mode.
Getting Started/CD 13 The disc number* at the loading position appears in the display. As you turn DISC ACCESS, the disc number or Disc Memo changes. * If you have already loaded discs, the disc number at the playing position appears. When you turn DISC ACCESS, the displayed disc number changes to the one at the loading position.
14 Other Operations To Do this Stop play Press x . Pause Press X PAUSE (or X on the remote). Press again to resume play. Select a track During play or pause, press > + (to go forward) or – . (to go back). Find a point in a track During play, press and hold M (to go forward) or m (to go back).
CD 15 Programing CD tracks — Program Play You can make a program of up to 25 tracks from all the CDs in the order you want to play them. 1 Press CD to switch the function to CD. 2 Press PLAY MODE repeatedly until “PGM” appears. 3 Turn DISC ACCESS (or press T DISC or DISC t on the remote) to select a CD.
16 7 Press M . The character you selected in step 6 stops flashing and the cursor shifts to the right. 8 Repeat steps 6 and 7 to complete the entire title. If you made a mistake Press m or M until the character you want to change flashes, then repeat steps 6 and 7.
CD 17 Checking the Disc Memos 1 Press CD to switch the function to CD. 2 Press MENU. 3 Press – . or > + (or . or > on the remote) repeatedly until “ NAME CHECK ” appears. 4 Press ENTER. 5 Turn DISC ACCESS to select the disc titles stored in the system memory between 01 and 60.
18 To tune in a station with a weak signal Press m or M repeatedly in step 2 to tune in the station manually. To set another station to an existing preset number Start over from step 1. After step 4, press – . or > + repeatedly to select the preset number you want to store the other station.
Tuner 19 Listening to the radio — Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 18). 1 Press TUNER/BAND repeatedly to select “ FM ” or “ AM ” . 2 Press – . or > + (or . or > on the remote) repeatedly to tune in the desired preset station.
20 Other Operations To Do this Stop play Press x . Pause Press X PAUSE (or X on the remote). Press again to resume play. Fast-forward or rewind Press m or M . Remove the cassette Press Z . Searching for beginning of a track (AMS) * Press – . or > + (or .
Tape 21 Recording to a tape — CD Synchro Recording/Recording Manually/Program Edit You can record from a CD, tape or radio. The recording level is adjusted automatically. Steps Recording from a CD (CD Synchro Recording) Recording from a CD/tape/radio manually 1 Load a recordable tape into deck B.
22 Recording a CD by specifying track order — Program Edit When programing, make sure the playing times for each side do not exceed the length of one side of the tape. 1 Load a recordable tape into deck B. 2 Press CD. 3 Press PLAY MODE repeatedly until “PGM” appears.
Tape 23 T imer -recording radio programs You can record a preset radio station from a specified time. To timer-record, you must first preset the radio station (see “Presetting radio stations” on page 18) and set the clock (see “Setting the time” on page 11).
24 Sound Adjustment Selecting the sound effect The preset music menu lets you select the sound characteristics according to the sound you are listening to. Selecting the effect from the music menu Press PRESET EQ repeatedly to select the preset you want.
Sound Adjustment 25 Selecting the surround effect For MHC-MG510AV/MG310AV 1 Press SURROUND to turn on the surround mode. 2 Press SURROUND MODE repeatedly to select the surround effect you want. SUR ON: Reproduces stereo sources in surround sound.* HALL: Reproduces the acoustics of a concert hall.
26 Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the time” on page 11). 1 Prepare the music source you want to play. • CD: Load a CD. To start from a specific track, make a program (see “Programing CD tracks” on page 15).
Other Features/Using an Optional Keyboard 27 7 Press – . or > + (or . or > on the remote) repeatedly until the music source you want appears. The indication changes as follows: t TUNER y CD PLA Y T t T APE PLA Y T 8 Press ENTER.
28 Optional Components Make a digital recording from CD to MD Connect an optical cable. Listen to the analog sound of a connected VCR Connect the audio cords. Press 5.1CH/VIDEO (MD)* repeatedly until “ VIDEO ” appears. Listen to the analog sound of the connected MD deck With the system turned off, press 5.
Using an Optional Keyboard/Optional Components 29 Notes • Make sure to match the color of the plugs and the connectors. • If you want to switch back to VIDEO function, perform the operation described in the previous page to switch to VIDEO function.
30 To the front output of the DVD player To the center output of the DVD player To the rear output of the DVD player To the woofer output of the DVD player When your DVD player has 5.1 channel analog outputs Make sure to match the color of the plugs and the connectors.
Optional Components/Additional Information 31 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents. • Do not expose the CD to direct sunlight or heat sources. • Discs with non-standard shapes (e.
32 T roubleshooting If you have any problem using this system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
Additional Information 33 The sound from the connected source is distorted when VIDEO function is selected. • Select MD function. If “ VIDEO ” appears in the display when you press 5.
34 Troubleshooting (continued) Tape Deck The tape does not record. • No tape in the cassette holder. • The tab has been removed from the cassette. (see “ To save a tape permanently ” on page 31). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level.
Additional Information 35 Specifications Amplifier section MHC-MG510AV/MG310AV/MG110 U.S.A. models: AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 8 ohm loads both channel.
36 Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more FRONT SPEAKER: accepts impedance of 8 to 16 ohms (except for the North American model) SURROUND SPEAKER REAR (MHC-MG510AV/ M.
Additional Information 37 Rear speaker (MHC-MG510AV/MG310AV only) SS-RS560 for MHC-MG510AV: Speaker system 2-way, 2-unit, bass-reflex type Speaker units Full-range: 10 cm, cone type Nominal impedance 8 ohms Dimensions (w/h/d) Approx. 215 × 120 × 127 mm Mass Approx.
.
.
Sony Corporation Printed in China.
デバイスSony MG110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony MG110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony MG110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony MG110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony MG110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony MG110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony MG110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony MG110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony MG110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。