SonyメーカーMHC-DX30の使用説明書/サービス説明書
ページ先へ移動 of 32
1 Mini Hi-Fi Component System 4-233-605- 11 (2) MHC-RG60 MHC-DX30/RG40 MHC-DX20/RG30 © 2001 Sony Corporation Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 * European model only T able of Contents Parts Identification Main unit ............................................... 4 Remote Control ..................................... 5 Getting Started Hooking up the system .......................... 6 Inserting two R6 (size AA) batteries into the remote .
4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses for details. Main unit ql w; qj qh qk qg qd qf wa ws wd wf wg wh wj wk eg ef ed es e; w.
5 Parts Identification Remote Control 5 6 7 8 9 0 qa qs 12 3 4 qd qf qg qh ql qk qj CD qj (10, 11, 15, 16) CLEAR 6 (10) CLOCK/TIMER SELECT 2 (17, 22) CLOCK/TIMER SET 3 (8, 16, 21) D.
6 * MHC-RG60 only Surround speaker (Right) * Front speaker (Right) FM antenna AM loop antenna Surround speaker (Left) * Front speaker (Left) 1 Connect the front speakers. Connect the speaker cords to the SPEAKER jacks as shown below. R + L + — Insert only the stripped portion.
7 Getting Started 3 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A F M 7 5 A M Jack type B A M F M 75 C O A X IA L AM loop antenna Extend the FM lead antenna hori.
8 Hooking up the system (continued) 4 Press ENTER. 5 Press v or V repeatedly to set the hour. 6 Press B . The minute indication flashes. 7 Press v or V repeatedly to set the minute. 8 Press ENTER. Tip If you made a mistake or want to change the time, start over from step 1.
9 Getting Started/CD CD Loading a CD 1 Press Z OPEN/CLOSE. The disc tray opens. 2 Place a CD with the label side up on the disc tray. When you play a CD single (8 cm CD), place it on the inner circle of the tray. To insert additional discs, press DISC SKIP EX-CHANGE to rotate the disc tray.
10 To Do this Playing a CD (continued) Switch to CD function from another source 3 Press one of DISC 1 – 3 to select a CD. To program all the tracks on a CD at once, proceed to step 5 with “ AL ” displayed. 4 Press . or > until the desired track appears in the display.
11 CD/Tuner Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press nN . •“ --.-- ” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.
12 Listening to the radio — Preset Tuning Preset radio stations in the tuner ’ s memory first (see “ Presetting radio stations ” on page 11). 1 Press TUNER/BAND repeatedly to select “ FM ” or “ AM ” . 2 Press . or > (or press PRESET +/ – on the remote) repeatedly to tune in the desired preset station.
13 Tuner Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal.
14 Tape Loading a tape 1 Press TAPE A/B repeatedly to select deck A or B. 2 Press Z . 3 Insert a recorded tape in deck A or B with the side you want to play/record facing forward. With the side you want to play/record facing forward. Playing a tape You can use TYPE I (normal) tape.
15 Tape 7 Press nN to start playing the source to be recorded. 4 Press CD SYNC. Press REC PAUSE/START. Deck B stands by for recording. REC PAUSE/START button flashes. 2 Press CD. Press CD, TAPE A/B or TUNER/BAND. Recording to a tape — CD Synchro Recording/Recording Manually/Program Edit You can record from a CD, tape or radio.
16 Tip To check the required tape length for recording a CD, press EDIT until “EDIT” flashes after you have loaded a CD and pressed CD. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively ( Tape Select Edit ).
17 Tape/Sound Adjustment 5 Repeat step 4 to set the time to stop recording. The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “ TUNER FM 5 ” ), then the original display appears. 6 Load a recordable tape into deck B.
18 To cancel the effect Press EFFECT ON/OFF repeatedly until “ EFFECT OFF ” appears in the display. Sound effect options “ SURR ” appears if you select an effect with surround effects.
19 Sound Adjustment/Other Features Other Features Enhancing video game sound — Game Sync You need to connect a video game machine (see “ Connecting a video game machine ” on page 23). Press GAME. • In the standby mode, the system automatically turns on.
20 3 Press KARAOKE PON repeatedly to obtain the karaoke effect you desire. Every time you press the button, the display changes cyclically as follows: KARAOKE PON y Effect status* * KARAOKE PON is canceled. 4 Start playing the music. 5 Adjust the microphone volume by turning MIC LEVEL.
21 Other Features Falling asleep to music — Sleep Timer You can set the system to turn off after a certain time, so you can fall asleep to music. Press SLEEP on the remote.
22 8 Press ENTER. The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time, and the music source, appear, then the original display appears. 9 Press ?/1 to turn off the system. To Do this Waking up to music (continued) Optional Components Hooking up the optional A/V components You can connect your MD deck or VCR to this system.
23 Other Features/Optional Components Notes • If you cannot select “ MD ” when you press MD (VIDEO), press ?/1 while holding down MD (VIDEO) when the system is on. “ VIDEO ” will be switched to “ MD ” . To return to “ VIDEO ” , do the same procedure.
24 Cleaning the cabinet Use a soft cloth slightly moistened with mild detergent solution. To save a tape permanently To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. If you later want to reuse the tape for recording, cover the broken tab with adhesive tape.
25 Additional Information T roubleshooting If you have any problem using this system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
26 Troubleshooting (continued) Speakers Sound comes from one channel or unbalanced left and right volume. • Check the speaker connection and speaker placement. Sound lacks bass. • Check that the speaker ’ s + and – jacks are connected correctly.
27 Additional Information Specifications AUDIO POWER SPECIFICATIONS: (MHC-RG40 USA models only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohm loads both channels driven, from 120 – 10,000 Hz; rates 100 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output.
28 CD player section System Compact disc and digital audio system Laser Semiconductor laser ( λ =780 nm) Emission duration: continuous Laser output Max. 44.6 µ W* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture.
29 Additional Information General Power requirements North American models: 120 V AC, 60 Hz European models: 230 V AC, 50/60 Hz Australian models: 230 – 240 V AC, 50/60 Hz Mexican models: 120 V AC, .
.
.
Sony Corporation Printed in China.
デバイスSony MHC-DX30の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony MHC-DX30をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony MHC-DX30の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony MHC-DX30の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony MHC-DX30で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony MHC-DX30を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony MHC-DX30の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony MHC-DX30に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony MHC-DX30デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
