SonyメーカーSNC-xxの使用説明書/サービス説明書
ページ先へ移動 of 28
Easy Setup Guide for the Sony Network Camera Please read the information with this mark attached carefully . 3-878-191- 11 (1) © 2008 Sony Corporation For setup, a computer running the Microsoft Windows Operating System is required. For monitoring camera images, Microsoft Internet Explorer (V ersion 6.
2 Network camera Hub (or router) Computer Before Using Y our Camera For the First T ime This “Easy Setup Guide for the Sony Network Camera” describes how to monitor images from your Sony network camera on a computer connected to the same network.
3 Sequence of the Easy Setting Operation This setup guide describes how to make the required settings in the following order so that you can monitor images from your camera on your computer . 1 Conr ming the Settings of the Computer This section describes how to conrm the settings of the computer .
4 1 Conr ming the Settings of the Computer 1 T urn on the computer and start Windows. Log on as an Administrator . 2 Click the [Start] button and then click [Control Panel]. 3 When the “Control Panel” window appears, click [View network status and tasks] in [Network and Internet].
5 5 When [Local Area Connection Status] is displayed, click [Details…]. When using Windows XP “Address T ype” can be displayed by the following steps for steps 3 to 5. Select [All Programs], [Accessories], [Communications], [Network Connections] from the [Start] menu.
6 “DHCP Enabled No” is displayed. When using Windows XP “Manually Congured” is displayed in the [Local Area Connection Status]. Go to step 7-a . (Page 7) “DHCP Enabled Y es” is displayed. When using Windows XP “Assigned by DHCP” is displayed in the [Local Area Connection Status].
7 3 2 1 Conr ming the Settings of the Computer 7-a Conrm the IP Address, Subnet Mask, and Default Gateway at step4. IP Address ... Subnet Mask ... Default Gateway ... The Default Gateway may not be displayed, depending on the network environment.
8 3 2 1 Conr ming the Settings of the Computer 7-b T o change the IP address other than the IP address shown in step 4, follow the steps shown below . 1 Select [Network and Internet], [View network status and tasks] in [Control Panel] from the [Start] menu.
9 3 2 1 Conr ming the Settings of the Computer 4 Click the [General] tab, place a check mark in the [Internet Protocol V ersion4 (TCP/IPv4)] box, and then click [Properties].
10 3 2 1 Conr ming the Settings of the Computer 8 The IP address of the computer is set. Go to 2 Setting the IP Address of the Camera . (Page 1 1) 6 Conrm that [Use the following DNS server addresses] is selected. When you select [Use the following IP address] in step 5, [Use the following DNS server addresses] is selected automatically .
11 2 Setting the IP Ad dress of the Camer a Y ou have to set an IP address of the camera to access the camera from the computer . 1 T urn on the camera if it is not already turned on. 2 Insert the CD-ROM supplied with the camera into the CD-ROM drive of the computer .
12 4 Click [Run] in the following dialog window . 5 Click [Run] in the following dialog window . The “Welcome” dialog appears. 3 1 2 Setting the IP Address of the Camera 6 Install the “IP Setup Program” on your computer using the wizard.
13 3 1 2 Setting the IP Address of the Camera 7 When installation is completed, select [All Programs], [IP Setup Program], and then click [IP Setup Program] from the [Start] menu. If the message “User Account Control – An unidentied program wants access to your computer” appears, click [Allow].
14 3 1 2 Setting the IP Address of the Camera “DHCP Enabled Y es” is displayed. When using Windows XP “Assigned by DHCP” is displayed in the [Local Area Connection Status]. Set the IP address item of the camera to “Obtain an IP address automatically” in accordance with the settings of the computer .
15 3 1 2 Setting the IP Address of the Camera 9-a “DHCP Enabled No” is displayed When using Windows XP When “Manually Congured” is displayed in the “Address T ype” box Set the IP address.
16 9-b “DHCP Enabled Y es” is displayed When using Windows XP When “Assigned by DHCP” is displayed in the “Address T ype” box Set the IP address. Select [Obtain an IP address automatically]. Click this radio button. 3 1 2 Setting the IP Address of the Camera 10 Conrm that the HTTP port No.
17 1 1 T ype “admin” in the “Administrator name” box, and type “admin” in the “Administrator password” box. “*****” appears in the “Administrator password” box. Enter “admin” in both boxes. The factory settings of both items are “admin.
18 13 If “Setting OK” is displayed, click [OK], and close all dialog boxes opened. Y ou have nished the IP address setting process. Go to the next step to conrm that you have successfully assigned the IP address of the camera.
19 3 1 2 Setting the IP Address of the Camera 15 Y ou have successfully assigned the IP address of the camera. Go to Monitoring Images from the Camera 3 (page 20) while the “IP Setup Program” window remains open.
20 3 Monitoring Ima ges fr om the Camer a 1 Double-click your camera name on the list of cameras in the “IP Setup Program” window . Or , Start the Web browser of the computer on which you set the .
21 1 3 Monitoring Images fr om the Camera 2 2 Click each dialog buttons shown below to continue installing. Click anywhere in the bar . Select [Install Active X Control…]. The message “Do you want to install this software?” appears and then click [Run].
22 3 When the “Security W arning” dialog appears, click [Install]. The ActiveX Control is installed and the Main viewer appears. The camera images are displayed. This screen is called the Main viewer . This viewer is different based on the model of the camera, or the operation mode.
23 When the Main viewer is not displayed correctly: The security level of the Internet Explorer may be set to a level higher than [Medium]. Set the security level of the Internet Explorer to Medium or lower , as follows: 1 Select [T ools] from the Internet Explorer menu bar , then select [Internet Options.
24 Select [Default level] in the “Security” tab window of the “Internet Options” window . When you cannot select [Default level] because it is not displayed in the “Security” tab window , the level has already been set to [Default level].
25 Monitoring camera images via the internet: When you monitor camera images on a computer connected to a network different from the camera: This Easy Setup Guide describes how to monitor camera images on a computer connected to the same network as the camera.
26 When the Main viewer is not displayed correctly: The security level of the Internet Explorer may be set to a level higher than [Medium]. Set the security level of the Internet Explorer to Medium or lower , as follows: 1 Select [T ools] from the Internet Explorer menu bar , then select [Internet Options.
27 Select [Default Level] in the “Security” tab window of the “Internet Options” window . When you cannot select [Default Level] because it is not displayed in the “Security” tab window , the level has already been set to [Default Level].
28 Monitoring camera images via the internet: When you monitor camera images on a computer connected to a network different from the camera: This Easy Setup Guide describes how to monitor camera images on a computer connected to the same network as the camera.
デバイスSony SNC-xxの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony SNC-xxをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SNC-xxの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SNC-xxの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SNC-xxで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SNC-xxを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SNC-xxの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SNC-xxに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SNC-xxデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
