SonyメーカーSPP-A985の使用説明書/サービス説明書
ページ先へ移動 of 80
3-223-813- 11 (1) ©2000 Sony Corporation SPP-A985 Cor dless T elephone with Answering System Operating Instructions US.
2 US Owner’s Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SPP-A985 Serial No.
3 US IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions.
4 US 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14.
5 US Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
6 US Table of contents T able of contents Getting Started 8 Read this first 9 Step 1: Checking the package contents 10 Step 2: Setting up the base phone 13 Step 3: Preparing the battery pack 16 Step 4.
7 US Table of contents 57 Recording a memo message 58 Operating from an outside phone 58 Setting the remote ID code (security code) 59 Picking up new messages Caller ID Features 60 Understanding the C.
Getting Started 8 US Getting Started Base phone Read this first Before you use your phone, you must first set it up. Here’s a quick way to set up your phone: Steps 1, 2, 3 and 4. Step 2 (pages 10 to 12) Next, you need to do three things to set up the base phone, including finding the best location for the base phone.
Getting Started 9 US Getting Started Telephone line cords (2) Handset AC power adaptor (AC-T131) Wall bracket for base phone Base phone Rechargeable battery pack (BP-T23) Step 1 Checking the package contents Make sure you have received the following items in the package.
Getting Started 10 US Step 2 Away from television sets and other electronic equipment Away from a microwave oven Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, o.
Getting Started 11 US Getting Started continued 1 Connect the telephone line cord to the LINE jack and to a telephone outlet. 2 Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet. 3 Raise the antenna. Make sure it points towards the ceiling.
Getting Started 12 US Notes • Use only the supplied AC-T131 AC power adaptor. Do not use any other AC power adaptor. • Connect the AC power adaptor to a continuous power supply. • Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily.
Getting Started 13 US Getting Started Pr eparing the battery pack Charge the battery pack for more than 12 hours before you start using your phone. 1 Slide open the battery compartment lid of the handset. 2 Insert the battery pack (with contacts facing down) into the battery compartment.
Getting Started 14 US Battery duration A fully charged battery pack lasts for about: • Approx. 7 hours when you use the handset continuously • Approx. 7 days when the handset is in standby mode. Notes • The battery pack will gradually discharge over a long period of time, even when not in use.
Getting Started 15 US Getting Started Handset spare battery usage As only one battery pack is supplied with this unit, it is necessary to purchase an additional battery pack (optional) for use as a handset spare battery pack. 1 Open the battery compartment lid of the base phone.
Getting Started 16 US Entering the ar ea code When you use this phone for the first time, or move to an area that has a different area code, you must enter your home area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions.
Getting Started 17 US Getting Started Notes • If the home area code is already entered, it appears on the display in step 4. To enter a different home area code, see “To change the home area code” below. • Do not allow more than 20 seconds to elapse between each step of the procedure.
Getting Started 18 US Step 4: Entering the area code (continued) To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number).
Getting Started 19 US Getting Started Notes • If the local area code is already entered, it appears on the display in step 5. To enter a different local area code, see “To change the local area code” below. • Do not allow more than 20 seconds to elapse between each step of the procedure.
Getting Started 20 US Base Phone 1 SKIP/QUICK button (p. 53) Press to skip to the next message. Keep the button pressed for quick playback of messages. 2 PLAY/STOP (MAILBOX 1, 2, 3) buttons (p. 51, 53) Plays back recorded messages in each mailbox. 3 NEW CALL lamp (p.
Getting Started 21 US Getting Started continued ql ERASE button (p. 48, 54) Erases the recorded greeting or messages. w; VOL +/– buttons (p. 26, 32, 54) Adjusts the speaker volume or press to move the cursor on the display. wa DIAL MODE switch (p. 12) Selects pulse or tone dialing.
Getting Started 22 US Identifying the parts (continued) 1 Antenna 2 Speaker 3 Jog Dial (p. 16, 35, 61) 4 TALK button (p. 24, 29) Lets you make or receive a call. 5 INTERCOM button (p. 42) Lets you talk between the base phone and handset. 6 HOLD button (p.
Getting Started 23 US Getting Started w; ql qg # button (p. 66) Used to change the number of digits of the phone number in the Caller ID list. qh PAUSE button (p. 36) Inserts a pause in the dialing sequence. qj MUTING button (p. 25) Mutes your voice during a conversation.
Basics 24 US 1 Pick up the handset from the base phone. 2 Press (TALK) and wait until “TALK” appears on the display. The display also shows the talk time in hours, minutes and seconds. You will then hear a dial tone. “HANDSET IN USE” appears on the display of the base phone and the LINE lamp on the base phone lights up.
Basics 25 US Basics Do this Set the VOL switch to H (high), M (middle) or L (low). Press (HOLD) . “HOLD” appears on the display. Press (HOLD) again to resume the conversation. Press (MUTING) to disable the microphone. “MUTING” appears on the display.
Basics 26 US To Adjust the speaker volume Put a call on hold Switch to another call (“call waiting” service*) Switch to tone dialing temporarily * You need to subscribe to the service from your telephone company. Do this During speakerphone conversation, press (VOL) (+) or (- -) .
Basics 27 US Basics Notes • While conversing with an outside caller via the handset, the display on the base phone shows “HANDSET IN USE”. If you press (SPEAKERPHONE) at this time, you can talk to the handset and to the line connected. • When the talk time exceeds 9:59’59, the display counts from 0:00’00 again.
Basics 28 US Redialing 1 Press (TALK) and wait until “TALK” appears on the display. The LINE lamp on the base phone lights up. If you’re at the base phone, press (SPEAKERPHONE) . “SPEAKERPHONE” appears on the display and the SPEAKERPHONE lamp lights up.
Basics 29 US Basics 1 When you hear the phone ring: •Press (TALK) . or • Pick up the handset from the base phone when the handset is placed on the base phone. “TALK” appears on the display and the display also shows the talk time in hours, minutes and seconds.
Basics 30 US Do this Set the VOL switch to H (high), M (middle) or L (low). Press (HOLD) . “HOLD” appears on the display. Press (HOLD) again to resume the conversation. Press (MUTING) to disable the microphone. “MUTING” appears on the display.
Basics 31 US Basics Receiving calls through the speakerphone When you hear the phone ring, press (SPEAKERPHONE) on the base phone. “SPEAKERPHONE” appears on the display and the display also shows the talk time in hours, minutes and seconds. The SPEAKERPHONE lamp lights up.
32 US Telephone Features Storing phone numbers and names Example : to store “SONY” “123-4567”. 1 Press (PGM) . “PROGRAM” appears on the display. 2 Press (SPEED DIAL) . “ENTER 0 TO 9” appears on the display. 3 Press one of the dialing keys ( (0) to (9) ) to store a phone number on.
33 US Telephone Features Telephone Features continued 5 Press (PGM) . “ENTER NUMBER” appears. 6 Enter the phone number. You can enter up to 32 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 17 digits or more has been entered, the phone number appears in two lines.
34 US Telephone Features Making calls with speed dialing 1 Press (SPEAKERPHONE) . 2 Press (SPEED DIAL) . 3 Enter the desired speed dialing number ( (0) to (9) ).
35 US Telephone Features Telephone Features You can dial a number by scrolling through the Phone Directory, in which up to 50 phone numbers can be stored. Storing phone numbers and names Example : to store “SONY” “123-4567”. 1 Press (PGM) . (Be sure not to press (TALK) .
36 US Telephone Features Phone Directory (continued) 4 Press (PGM) . “ENTER NUMBER” appears. 5 Enter the phone number. You can enter up to 32 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 17 digits or more has been entered, the phone number appears in two lines.
37 US Telephone Features Telephone Features Changing a stored name and/or phone number 1 Display the name and phone number you want to change by doing steps 1 and 2 in “Making calls from the Phone Directory” on page 38. 2 Press Jog Dial. 3 Turn Jog Dial up to make “EDIT” flash and press Jog Dial.
38 US Telephone Features Erasing a memory location 1 Display the name and phone number you want to erase by doing steps 1 and 2 in “Making calls from the Phone Directory”. 2 Press Jog Dial. 3 Turn Jog Dial up to make “ERASE” flash and press Jog Dial.
39 US Telephone Features Telephone Features Tip You may press (TALK) to make a call instead of doing steps 3 and 4. About the search order The names appear in the following order when you turn Jog Dial up or down.
40 US Telephone Features Turning off the ringer of the handset 1 Perform steps 1 to 3 above. 2 Press (0) . You will hear a confirmation beep. 3 Press (OFF) .
41 US Telephone Features Telephone Features To switch from the base phone to the handset 1 Press (HOLD) on the base phone. The call is on hold and “HOLD” appears on the display and the SPEAKERPHONE lamp on the base phone flashes. 2 Press (TALK) or (HOLD) on the handset.
42 US Telephone Features To talk from the base phone to the handset Press (INTERCOM) on the base phone. The base phone and handset ring and “ ** PAGING ** ” appears on the display. When a person at the handset presses (INTERCOM) , you can talk with each other.
43 US Telephone Features Telephone Features Notes • If there’s an incoming call while on the intercom, only the base phone rings. To answer the call, press (SPEAKERPHONE) on the base phone or (TALK) on the handset. The intercom is canceled and you can talk to the outside caller.
44 US Telephone Features You can transfer a call between the handset and base phone without disconnecting the call. To transfer from the base phone to the handset 1 Press (INTERCOM) to page the handset. The call is put on hold on the base phone and the handset rings.
45 US Telephone Features Telephone Features To transfer from the handset to the base phone 1 Press (INTERCOM) to page the base phone. The call is put on hold on the handset. After the base phone rings twice, you will be connected automatically. When a person at the base phone answers, you can talk with each other.
46 US Answering Machine Features Setting the time and day of the week 1 Press (MENU) repeatedly until you hear “Set day and time”. ”- -” blinks on the display. 2 Press (SELECT) repeatedly to select the day of the week. 3 Press (TIME/SET) . The day is set and the hour is announced.
Answering Machine Features 47 US Answering Machine Features Tip All the mailbox buttons ( (MAILBOX 1) , (MAILBOX 2) and (MAILBOX 3) ) work as the (PLAY/STOP) button; press any of the three in this case. To hear the current time Press (TIME/SET) . The current time setting is announced.
48 US Answering Machine Features Setting up the answering machine (continued) To check the greeting Press (MENU) repeatedly until “Set out-going message” is announced. Then press (PLAY/STOP) to play back the greeting. To change the greeting Record a new greeting by following the instructions on the previous page.
Answering Machine Features 49 US Answering Machine Features Setting the number of rings You can select the number of times the phone rings before it answers to take a message. There are four modes: 2, 4, 6, and Toll Saver. 1 Press (MENU) repeatedly until you hear “Set number of rings”.
50 US Answering Machine Features Setting the audible message alert You have the option of having a beep tell you if you have received any new incoming messages. 1 Press (MENU) repeatedly until you hear “Set audible message alert”. “- -” blinks on the display.
Answering Machine Features 51 US Answering Machine Features Turning on the answering function Press (ANSWER ON/OFF) on the base phone. The ANSWER ON/OFF button lights up. Mailbox usage This phone offers you three voice mailboxes, providing a convenient way to share the mailbox feature with other members of your household or business.
52 US Answering Machine Features Note The answering function is preset to on. Tip The answering machine will automatically answer a call after 10 rings, even if the answering function is off and announces “Please enter your security code” to prompt the caller to turn on the answering function.
Answering Machine Features 53 US Answering Machine Features Do this Press a mailbox button ( (MAILBOX 1) , (MAILBOX 2) or (MAILBOX 3) ). Press (REPEAT/SLOW) during play back. Press (SKIP/QUICK) . Press (REPEAT/SLOW) within the first two seconds of the current message playback.
54 US Answering Machine Features Adjusting the speaker volume To adjust the speaker volume, press (VOL)(+) or ( - ) . Notes • When you have reached the minimum or maximum volume level, you will hear three short beeps. • You cannot adjust the speaker volume while the phone is ringing.
Answering Machine Features 55 US Answering Machine Features Selecting the Announcement Only Mode You can set the answering machine to play the greeting without recording incoming messages (announcement only mode). You might want to select this mode when, for example, you expect to be away for a while and you cannot pick up messages.
56 US Answering Machine Features Turning on/off the screening calls function The screening calls function is preset to on at the factory. 1 Press (MENU) repeatedly until you hear “Set call screening”. 2 Press (SELECT) to set the screening calls function on or off.
Answering Machine Features 57 US Answering Machine Features Recor ding a memo message You can leave messages for other users of the unit. 1 Press (REC/MEMO) . 2 Press a mailbox button ( (MAILBOX 1) , (MAILBOX 2) or (MAILBOX 3) ) to which you want to leave the message.
58 US Answering Machine Features Operating fr om an outside phone Setting the remote ID code (security code) To operate the answering machine from a touch-tone phone while you are away from home, you need to set the remote ID code (security code). 1 Press (MENU) repeatedly until you hear “Set security code”.
Answering Machine Features 59 US Answering Machine Features Key (#)(1) (#)(2) (#)(3) (#)(4) (*)(5) (#)(5) (#)(6) (*)(7) (#)(7) (*)(8) (#)(9) (#)(0) Notes Plays back from the first new message. Plays back from the first new message. Plays back from the first new message.
60 US Caller ID Features Understanding the Caller ID service Caller ID allows the caller’s phone number to be shown on the display before the call is answered. In order to use this feature, you must first subscribe to the Caller ID service. The name of this service may vary depending on your telephone company.
61 US Caller ID Features Caller ID Features Looking at the Caller ID list The phone stores the data of the last 20 calls received including “OUT OF AREA” and “PRIVATE” calls. It keeps track of all calls received; even if they were not answered.
62 US Caller ID Features Looking at the Caller ID list (continued) About the “ * ” mark “ * ” appears if there are more than two calls from the same phone number. The older data will be replaced by the new data, so the calls are counted as only one call.
63 US Caller ID Features Caller ID Features NEW OO OLD OO To erase the entire list at once 1 Display any Caller ID data. 2 Press Jog Dial. 3 Turn Jog Dial up to make “ERASE” flash and press Jog Dial. 4 Turn Jog Dial up to make “ALL” flash, then press Jog Dial.
64 US Caller ID Features Using the Caller ID list By using the Caller ID list, you can call back a phone number from the Caller ID list easily, or store numbers from the Caller ID list into the Phone Directory. Calling back a number from the Caller ID list 1 Display the phone number you want to call from the Caller ID list (see page 61).
65 US Caller ID Features Caller ID Features Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 61). 2 Confirm the number and press Jog Dial. 3 Turn Jog Dial up to make “PGM” flash and press Jog Dial.
66 US Caller ID Features To change the number of digits of the phone number If the number of digits of the phone number in the Caller ID list is different from the actual phone number, you need to adjust the number of digits of the phone number to call back or store into the Phone Directory.
67 US Caller ID Features Caller ID Features When the local area code matches 2 Continue the operation to call or store the phone number with the correct number of digits (pages 64 and 65). Notes • You need to adjust the number of digits each time you call back from the Caller ID list as the changes to the Caller ID data is not stored in memory.
68 US Caller ID Features Using “Caller ID with call waiting” service This telephone is compatible with the “Caller ID with call waiting” service. Make sure that your telephone company offers this service. Like the basic Caller ID service, you need to subscribe to “Caller ID with call waiting” in order to use this service.
Additional Information 69 US Additional Information Mounting the base phone on a wall 1 Raise the hang-up tab. 2 Plug the telephone line cord to the LINE jack and the AC power adaptor to the DC IN 9V jack, and hook the cords. Use the shorter cord for mounting.
Additional Information 70 US Carrying the handset by the belt clip You can hang the handset on the belt by attaching the belt clip to the handset. Attaching the belt clip Press the belt clip to the handset. Make sure that the side tabs click and go into the holes on the sides of the handset.
Additional Information 71 US Additional Information Notes on power sour ces On battery pack • Store the battery pack at a temperature between 41°F (5°C) and 95°F (35°C) for best performance.
Additional Information 72 US Symptom You hear five short error beeps when you press (TALK) . You hear no dial tone. The phone does not connect at all, even though the number you dial is correct. The phone does not redial correctly. You hear five short error beeps when you try to redial.
Additional Information 73 US Additional Information Remedy • Move the handset closer to the base phone. • Place the base phone away from noise sources (page 10). • This is the out-of-range alarm. Move the handset closer to the base phone within one minute.
Additional Information 74 US Remedy • The remaining recording time is less than 30 seconds or 99 messages were recorded. The answering machine becomes “Memory full” status and does not record messages. Erase messages (page 54). • The message is less than two seconds.
Additional Information 75 US Additional Information Symptom The caller’s name and/or phone number does not appear on the display. The caller’s name and/or phone number does not appear on the display during call waiting. You cannot dial the number from the Caller ID list.
Additional Information 76 US It means Number of messages not yet played back. Flashes when the day and time is cleared or delayed due to a power interruption, or when you connect the base phone to the AC outlet for the first time. Reset the time correctly (page 46).
77 US Additional Information Additional Information General Frequency band 902 - 928 MHz Operating channel 30 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 9. Handset Power source Rechargeable battery pack BP-T23 Battery charging time Approx.
Additional Information 78 US Index A Adjusting volume handset volume 25, 30 speaker volume 26, 31, 54 Announcement only mode 55 Answering machine playing back messages 53 setting up 46 turning on 56 A.
79 US Additional Information Additional Information S Screening calls 56 turning on/off the screening calls function 56 Setting up base phone 10 handset 13 Spare battery 15 Speakerphone 26, 27 Speed d.
Sony Corporation Printed in China For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.
デバイスSony SPP-A985の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony SPP-A985をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SPP-A985の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SPP-A985の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SPP-A985で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SPP-A985を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SPP-A985の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SPP-A985に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SPP-A985デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
