SonyメーカーXAVW1の使用説明書/サービス説明書
ページ先へ移動 of 28
RCD-W1 (US) 4-233-692- 12 (1) Actual page number: ©2001 Sony Corporation Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The laser component in this product is capable of emitting radiation exceeding the limit for Class 1.
3 ES F P RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Precautions On safety • Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further. • The use of optical instruments with this product will increase the risk of eye hazard.
4 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Contents Getting Started Unpacking ............................................. 5 Hooking Up the System ........................ 5 This Recorder Can Use the Following Discs .........................
5 Getting Started Started RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Unpacking Check that you received the following items: • Audio connecting cord (2) • Remote commander (remote) (1) • Size AA (R6) batteries (2). Inserting batteries into the remote You can control the recorder using the supplied remote.
6 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Hookups Connecting the recorder to an amplifier Connect the amplifier to the ANALOG IN/ OUT jacks using the audio connecting cords (supplied), making sure to match the color- coded cords to the appropriate jacks on the components: red (R) to red and white (L) to white.
7 Basic Operations RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 1 Turn on the amplifier and set the source selector to the position for the DECK A (or B). 2 Press POWER. 3 Press A and place a disc on the inner circle of DECK A (or B). Press A again to close the disc tray.
8 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Using the display When you check the total number of tracks and total playing time of the disc while the recorder is stopped, the information appear.
9 Basic Operations RCD-W1 (US) 4-233-692- 12 (1) Actual page number: For details on finalizing, refer to page 20, and page 21 for unfinalizing. Tip Whenever you change the operation status of the recorder, the display automatically changes to reflect that status.
10 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: To locate Stop playback The next or succeeding tracks The beginning of the current or preceding tracks A specific track directly * AMS: Automatic Music Sensor Tips To pause playing at the beginning of a track, press AMS .
11 Basic Operations RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Locating a Particular Point in a T rack You can also use the m and M buttons to locate a particular point in a track during playback or playback pause. When using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
12 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Playing in Random Order (Shuffle Play) You can have the recorder “ shuffle ” tracks and play them in random order. When using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
13 Basic Operations RCD-W1 (US) 4-233-692- 12 (1) Actual page number: To erase the last programmed track Press CLEAR on the remote. Each time you press the button, the last programmed track is erased. Tip The program remains even after Program Play ends.
14 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Playing Both Deck Simultaneously (Dual Play) If you have 2 amplifiers in different locations in your house, you can connect the recorder to each amplifier and play two discs simultaneously on both DECK A and DECK B.
Recording on CDR RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 15 Recording a CD to CD-R or CD-RW disc (Synchro-Recording) You can easily make digital recordings from a CD to a CD-R, or CD-RW, making track numbers in the same sequence as the original CD.
RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 16 Recording a CD to CD-R or CD-RW disc at High Speed (High Speed Synchro-Recording) You can easily make digital recordings from a CD to a CD-R, or CD-RW, faster than normal Synchro-Recording, making track numbers in the same sequence as the original CD.
Recording on CDR RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 17 Notes • You cannot record over existing material. The recorder automatically starts recording from the end of the existing material.
RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 18 5 Adjust the recording level (ANALOG IN only), if necessary. For details, see “ Adjusting the Recording Level ” on page 19. 6 Press H . 7 Start playing the sound source you want to record. To pause recording Press X .
Recording on CDR RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 19 The “ OVER ” indicator If rec level is too loud, “ OVER ” appears in the front panel. The SRC indicator Adjusting the Recording Level (ANALOG IN only) You can adjust the recording level using the REC LEVEL control on the front panel.
RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 20 Finalizing a CD-R or CD- RW disc Finalizing completes the recording of a disc. It enables you to play the disc on other players. (The player must be CD-RW compatible. ) When a recording is finished, a CD-R or CD- RW disc must be finalized.
Recording on CDR RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 21 Unfinalizing a CD-RW disc A CD-RW disc is both recordable and rewritable. However, the process of rewriting or erasing is different from of cassette tapes. Unfinalizing a CD-RW disc A finalized CD-RW is neither recordable nor rewritable.
RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 22 Erasing a single track of CD-RW disc You can erase one track on a CD-RW at a time. This process starts with the last track on the disc. Please note that before erasing a track, you must unfinalize the disc.
Recording on CDR RCD-W1 (US) 4-233-692- 12 (1) Actual page number: 23 Erasing an Entire CD-RW disc Erasing the entire contents of a CD-RW disc is easy, and it does not matter whether the disc has been unfinalized or not. When using the remote, set SELECT to CDR for operations on DECK B.
24 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Explanation • A record-related button has been pressed when a finalized disc is in the DECK B. • A record-related button has been pressed when a standard CD is in the DECK B. A non-audio CD-ROM or a CD- Video disc has been placed in the machine.
25 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Additional Information The sound has a lot of static. Strong magnetism from a television or a similar device is interfering with operations. Move the recorder away from the source of strong magnetism.
26 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Specifications DECK A (the CD player section) System Compact disc and digital audio system Frequency response 20 Hz – 20,000 Hz (±0.
27 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Additional Information 07ADD_RCD-W1.p65 00.12.13, 10:33 AM 27.
28 RCD-W1 (US) 4-233-692- 12 (1) Actual page number: Sony Corporation Printed in Korea 07ADD_RCD-W1.p65 00.12.13, 10:33 AM 28.
デバイスSony XAVW1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony XAVW1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony XAVW1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony XAVW1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony XAVW1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony XAVW1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony XAVW1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony XAVW1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony XAVW1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
