BaracodaメーカーComputer Accessoriesの使用説明書/サービス説明書
ページ先へ移動 of 39
Data Capture for W orkforce in Motion ©Baracoda TM – July 2010 Baracod aPencil 2 - Programming Guide.
BaracodaPencil2 – Progra mming Guide v1.7 - 2 - Data Capture for W orkforce in Motion SUMMARY SUMMARY ................................................................... 2 REVISION HISTORY .......................................................... 3 INTRODUCTION .
BaracodaPencil2 – Progra mming Guide v1.7 - 3 - Data Capture for W orkforce in Motion Revision History Changes to the origin al manu al are listed belo w. Documen t Date Description 1.0 01 may 07 Initial release 1.4 26 Aug. 08 Update “Batch” section & add “The different connection m ethod ” section 1.
BaracodaPencil2 – Progra mming Guide v1.7 - 4 - Data Capture for W orkforce in Motion Introduction The BaracodaPenci l 2 can b e programmed by scan ning barcod e labels which contain comman ds for the 1D decoder. Programming labels must be Code128, with sp ecific startin g a nd end ing cha racters.
BaracodaPencil2 – Progra mming Guide v1.7 - 5 - Data Capture for W orkforce in Motion 1/ General Configuration 1.1/ Reset all paramete rs: The reading o f the "Default settings” la bel turns all the p arameters of the BaracodaP encil2 back to d efault settings and switches it off.
BaracodaPencil2 – Progra mming Guide v1.7 - 6 - Data Capture for W orkforce in Motion By default, timer s value are: - when connected ti mer = 20 m inutes - Not conn ected timer = 10 min utes Set shutdown t imers to defaults 1.3.3/ No data loss mo de and Baracoda Heade r Baracod a header : It is a proprietary d ata enca psulation.
BaracodaPencil2 – Progra mming Guide v1.7 - 7 - Data Capture for W orkforce in Motion Set Timestamp End of configu ration Noted tha t the timestamp mu st fit the specific following for mat: {YY} {MM.
BaracodaPencil2 – Progra mming Guide v1.7 - 8 - Data Capture for W orkforce in Motion 1.4/ Reading Mode In trigger mode, p ressing the t rigger will acti vate the beam. Trigger (*) The “No d uplicate scan ” option has been develop ed for users who do n ot want to scan the same barcod e twice.
BaracodaPencil2 – Progra mming Guide v1.7 - 9 - Data Capture for W orkforce in Motion 1.5/ Operating Mode Real T ime mode (standar d mode): barcod es are trans mitted in real time to the remo te host d evice/termin al (with optio nal ack nowledgm ent beep from the host to t he scan ner).
BaracodaPencil2 – Progra mming Guide v1.7 - 10 - Data Capture for W orkforce in Motion Real Time - B uffered data opti on It’s possible to set the scan ner in “Real Time with No Data Loss mod e” bu t with no b ufferisation (buffer configur ed to 0) when it’s not connected.
BaracodaPencil2 – Progra mming Guide v1.7 - 11 - Data Capture for W orkforce in Motion 1.5.2/ Batch mode BATCH MODE Forces the Barac odaPenci l2 in Batch m ode.
BaracodaPencil2 – Progra mming Guide v1.7 - 12 - Data Capture for W orkforce in Motion 1.6/ The different conn ection methods There are two (2 ) different wa y to create a connection from a Host an d a scanner: - Slave mode (b y default) The Host (PC, Bar acodaManager, …) is creating th e connect ion on to the scanner.
BaracodaPencil2 – Progra mming Guide v1.7 - 13 - Data Capture for W orkforce in Motion 1.7/ Buzzer and Led Settings You can use thes e options to en able or disable th e buzzer a nd / or the Led.
BaracodaPencil2 – Progra mming Guide v1.7 - 14 - Data Capture for W orkforce in Motion 1.8/ Bluetooth comman ds 1.8.1/ Bluetooth nam e You can chan ge the scanner B luetooth n ame; name that y ou see during a sear ch of Bluet ooth perip heral.
BaracodaPencil2 – Progra mming Guide v1.7 - 15 - Data Capture for W orkforce in Motion 1.8.2/ Sniff settings The higher the Sniff period, the higher is the latency and the smaller is the power co nsumption . Default value is 150ms. Sniff period = 150ms (*) Sniff period = 100ms Sniff period = 200ms Sniff period = 300ms Sniff period = 500ms 1.
BaracodaPencil2 – Progra mming Guide v1.7 - 16 - Data Capture for W orkforce in Motion 1.9/ Prefix and suffix The barcode string can b e add ed a prefix, a postprefix, a suffix and /or a po stsuffix. The se can co me as described below: prefix postprefix barcode suffix postsuffix 1.
BaracodaPencil2 – Progra mming Guide v1.7 - 17 - Data Capture for W orkforce in Motion 1.9.2/ Postrefix/postsuf fix You can add a postprefix and/or a postsuffix (strin gs of more t han 32 characters wi ll not be accepted ) to every barcode sent to the host device.
BaracodaPencil2 – Progra mming Guide v1.7 - 18 - Data Capture for W orkforce in Motion 2/ Decoder settings 2.1/ Symbology de fault settings Sets the defaults d ecoder settin gs for all the sy mbologies. Set Decoder Def ault Settin gs 2.2/ Symbology iden tifier AIM Identifier will be transmitt ed at the beginning o f th e barcode.
BaracodaPencil2 – Progra mming Guide v1.7 - 19 - Data Capture for W orkforce in Motion 2.4/ Set decoder barco de length You can set a fix ed length for the barcod e decoding. The scann er will only decode b arcodes of thi s length. (Feature ena bled for CPU fir mware versio n ≥ 1.
BaracodaPencil2 – Progra mming Guide v1.7 - 20 - Data Capture for W orkforce in Motion 2.5/ Codabar settings Codabar - n ot active Codabar – active (*) Codabar - start/s top - not t ransm itted (*.
BaracodaPencil2 – Progra mming Guide v1.7 - 21 - Data Capture for W orkforce in Motion Code 11 - ch eck digits - ch eck ed and transmitted (*) Code 11 - ch eck digits - ch eck ed but not transm itted Code 11 - barc ode length - any length Code 1 1 – barc ode length – M in = 6 (*) 2.
BaracodaPencil2 – Progra mming Guide v1.7 - 22 - Data Capture for W orkforce in Motion Code 39 - ch eck digit - m odulo 43 - check ed and tra nsm itted Code 39 - ch eck digit - m odulo 43 - check ed but not tra nsmitted Code 39 - barcode le ngth - an y length (*) Code 39 - barcode lengt h - m inimum length = 6 2.
BaracodaPencil2 – Progra mming Guide v1.7 - 23 - Data Capture for W orkforce in Motion 2.9.2/ EA N 128: Group Separator ‘FNC1’ included in an E AN128 code is trans mitted by default a s ‘GS’ (Group Sepa rator – 0x 1D).
BaracodaPencil2 – Progra mming Guide v1.7 - 24 - Data Capture for W orkforce in Motion Even if the “AIM ID t ransmit” i s disabled, it is p ossibl e to enable the AIM ID transmis sion for E AN128. Enable AIM ID transm ission for EAN 128 Dis able AIM ID tra nsm ission for EAN128 (*) 2.
BaracodaPencil2 – Progra mming Guide v1.7 - 25 - Data Capture for W orkforce in Motion MSI Code - chec k digit - m od 10 - check ed but not tra nsmitted MSI Code - chec k digit - do uble m od 10 - c.
BaracodaPencil2 – Progra mming Guide v1.7 - 26 - Data Capture for W orkforce in Motion 3.13/ UPC/ EAN Setting s UPC / EAN - active (*) U PC / EAN - not active UPC / EAN - U PC-A and E AN 13 desact i.
BaracodaPencil2 – Progra mming Guide v1.7 - 27 - Data Capture for W orkforce in Motion UPC / EAN - U PC num ber system - UPC-E - transm itted (*) UPC / EAN - U PC num ber system - UPC-E - not trans .
BaracodaPencil2 – Progra mming Guide v1.7 - 28 - Data Capture for W orkforce in Motion 3.14/ Set min or Max length option The following i s a procedure t o follow for every ba rcodes.
BaracodaPencil2 – Progra mming Guide v1.7 - 29 - Data Capture for W orkforce in Motion Symbology table Header Selected Symb ology SELECT ALL Code 93 Code 128 / EAN 128 EAN 13 / UPC A Code 39 Codabar.
BaracodaPencil2 – Progra mming Guide v1.7 - 30 - Data Capture for W orkforce in Motion APPENDIX 1: A SCII Table (A-Z, a -z, 0-9, ponctuati on, Control chara cters) Capital letters (A-Z) : Name Progr.
BaracodaPencil2 – Progra mming Guide v1.7 - 31 - Data Capture for W orkforce in Motion H U I V J W K X L Y M Z.
BaracodaPencil2 – Progra mming Guide v1.7 - 32 - Data Capture for W orkforce in Motion Small letters (a-z) : Name Programming label Name Programming label a n b o c p d q e r f s g t h u.
BaracodaPencil2 – Progra mming Guide v1.7 - 33 - Data Capture for W orkforce in Motion i v j w k x l Y m z.
BaracodaPencil2 – Progra mming Guide v1.7 - 34 - Data Capture for W orkforce in Motion Ponctuaction : Space ! " # $ LFLF$LF LF $ % & ' ( ) * + , - .
BaracodaPencil2 – Progra mming Guide v1.7 - 35 - Data Capture for W orkforce in Motion = > ? @ [ ] ^ _ { | } ~.
BaracodaPencil2 – Progra mming Guide v1.7 - 36 - Data Capture for W orkforce in Motion Decimal numbers (0-9 ) : Name Programming label 0 1 2 3 4 5 6 7 8 9.
BaracodaPencil2 – Progra mming Guide v1.7 - 37 - Data Capture for W orkforce in Motion Control Characters: Name Programming label CR EOT ETX LF NUL SOH STX TAB.
BaracodaPencil2 – Progra mming Guide v1.7 - 38 - Data Capture for W orkforce in Motion APPENDIX 2 The SI prefix is a two or three character string: ] c m where ] : SI indicator c : Symbology Id enti.
BaracodaPencil2 – Progra mming Guide v1.7 - 39 - Data Capture for W orkforce in Motion Code 39 Option Values 0 No check character or Full ASCII 1 Reader has performed mod 43 check 2 Reader has perfo.
デバイスBaracoda Computer Accessoriesの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Baracoda Computer Accessoriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBaracoda Computer Accessoriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Baracoda Computer Accessoriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Baracoda Computer Accessoriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Baracoda Computer Accessoriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBaracoda Computer Accessoriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Baracoda Computer Accessoriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBaracoda Computer Accessoriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
