StarTech.comメーカーNETRS232_2の使用説明書/サービス説明書
ページ先へ移動 of 20
Manual Revision: 09/17/2014 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ..................................................................................
Instruction Manual 1 Introduction Thank you for pur chasing a StarT ech.com Ethernet Remote Serial inter face con ver ter . With this one, two , or four port converter , your RS-232 serial devices can be placed anywhere on your Ethernet W AN/LAN and still per f orm as if they were right beside you.
Serial Rx LED Serial Tx LED Serial Port Network LEDs RJ-45 Port Pow er LED DC Pow er Port Instruction Manual 2 Hardwar e Guide.
Hardwar e Installation 1. Plug the power adapt er into the Power port on the conv er ter and plug the other end into an available pow er source. The red Po wer LED onthe converter should now be illuminated.
Conguring the Network Settings The IP Extender Manager software displays information in a format similar t o Window s Explorer . Any NETRS232 devices on your network are displayed in the “IP Extenders Near Me” branch of the “My IP Extender Network ” tree.
Conguring Network Settings U sing a W eb Browser The NETRS232 converter contains an embedded web server that allows y ou to congure your device ’ s net w ork settings through your web browser .
6. Congure the devic e. T he following network and port settings for the device can be congured in a T elnet session: Device settings (for the interface converter device): • IP address • Net.
Activating and Deactivating NETRS232 Ports NETRS232 por ts that ha ve been detected as existing on the network are not initially activated for your PC. T o access a serial por t, y ou must rst ac tiva te it. Y ou can ac tivat e a port on one computer , some computers, all computers, or none of the comput ers on your network.
There are two ic ons that depic t the stat e of the NE TRS232_x ports and devices: Icon: Device available on the network. Icon with red X: Device not available on the network. Icon with green square: Under “My Computer , ” this icon means the port is available.
Adv anced Settings Ports that have been activated on y our PC can generally be used without any fur ther conguration. There are , however , additional conguration options available through the IP Extender Manager . P or t Modes The interface converter converts serial port data to and from TCP/IP packets over Ethernet.
Virtual por t (driv er) settings The virtual por t allow s a serial por t on an NETRS232 device to be used in same manner as a local serial port when the por t is congured in Windows Mode (described above).
T o prevent this diculty, NETRS232 Links have a “ discovery ” mode that allows the correct NETRS232 Link por t to be f ound even when the IP address of the associated box has changed. T o use this discovery mode, a “port binding” must be created for that virtual por t.
Binding to IP Address The IP address of a network device is assigned by either the sy stem administrator or through a DHCP server . Binding a vir tual port to an IP address will for ce that virtual por t to attempt a c onnec tion to an y device with that particular IP address only .
W AN Activation Activating and accessing the virtual serial port on a NE TRS232 device across a WAN can be done in two dierent wa ys, depending on how the NETRS232 device is accessible. • NETRS232 device is accessible externally – is directly accessible on the Internet.
Instruction Manual 14 4. Ensure that the port(s) to use W AN ac tiva tion on are congured for “Driver Mode” . 5. Record the TCP port number of the por t(s) to be accessible .
Instruction Manual 15 Specications Internet Protoc ols IP , HTTP , ICMP , T CP , TFTP , and UDP Connectors 1 x RJ-45 Ethernet port (female) 1 x DC Pow er NETRS232_1 1 x DB-9 serial port (male) NETR.
Instruction Manual 16 T echnical Suppor t StarT ech.com’ s lifetime technical suppor t is an int egral par t of our commitmen t to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
デバイスStarTech.com NETRS232_2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
StarTech.com NETRS232_2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStarTech.com NETRS232_2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。StarTech.com NETRS232_2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。StarTech.com NETRS232_2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
StarTech.com NETRS232_2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStarTech.com NETRS232_2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、StarTech.com NETRS232_2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStarTech.com NETRS232_2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
