StarTech.comメーカーNETRS23POEEUの使用説明書/サービス説明書
ページ先へ移動 of 18
Ethernet Device Server 1-P ort Industrial RS-232 Ethernet Device Server - P ower over Ethernet NETRS2321POE Instruction Manual.
FCC Compliance Statement This equipment has been tested and f ound to comply with the limits f or a Class B digital device , pursuant to par t 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against har mful interference in a residential installation.
i T able of Contents Hard ware Guide ............................................................... 2 P ackage Contents ....................................................................... 2 F ront Panel ...........................................
2 Hardware Guide Package Contents 1 x Driver CD • 1 x Industrial Switch • 1 x Instruction Manual • 1 x P ower Adapter • Front Panel Switch to Restore Default Settings - 1. This switch can be used to reset the product to its f actor y def ault settings.
3 Rear Panel RS-232 Connector 1. LED Indicators 10/100 Mbps LED (amber color) 1. Link/Activity LED (green color) 2. Heartbeat LED (green color) 3. LED Name Colour Function 10/100 Mbps Green On: 100Mbps. Off: 10Mbps. Link/Activity Green On: Linked. Blinking: T ransfering Data.
4 Hardware installation Use static electricity discharge precautions. Remove possib le static 1. discharge potential from any objects that the adapter ma y come in contact with prior to installation. This can be accomplished b y touching a bare metal chassis rail after y ou hav e turned off the power .
5 Setting the IP Address from a DHCP Server 1. A DHCP server will automatically assign an IP address (dynamic address) as well as Subnet Mask and Gate wa y to this adapter . If you power up the Adapter without a fix ed (static) IP address, the DHCP server will be able to assign an IP address (Note: By default, DHCP is disabled.
6 Setting the IP Address using the Em.ex e Utility 3. The Em.exe is a Microsoft Windows based utility used to identify the adapters connected on the same subnet and network segment. T o run the Em.ex e utility , please inser t the driver CD supplied with the Adapter .
7 Controller Setup Menu Items Menu Item Description IP Address 4 numbers separated b y dots. If enabled, these can be assigned by the DHCP server . Subnet Mask 4 numbers separated b y dots. If enabled, these can be assigned by the DHCP server . Gatewa y Address 4 numbers separated b y dots.
8 Menu Item Description Socket P or t of HTTP Setup If disabled, the IP address , Subnet mask and Gatew ay address must be assigned man ually . Socket P or t of Serial I/O P ort Number: Any number betw een 1 and 65536,except 80 and 8080 (these hav e been designated as the web pages).
9 Menu Item Description Pac ket mode inter- packet timeout In pack et mode, the time constant used to determine if the packet is finished. Acceptable range is 10 to 1000 ms. Device ID User assigned device ID n umber . Acceptab le range is 0 to 65535.
10 Installing the VSP Virtual COM Port Driver Locate the necessary Software in the following f older on your driver 1. CD . The VSP COM.exe is the redirector softw are. The Em.exe is used to setup the hardware mode to support VSP redirector . Configure your hardw are mode to suppor t VSP .
11 Change the settings to • COM P ort , save the changes , and exit the setup menu. Run the 3. VSP Setup Program. Double clic k the • VSP COM.exe application in the VSP folder on the supplied CD . Y ou ma y receive a message indicating that this driver has not y et passed Windows logo testing.
12 Set the COM P ort settings: • The following figure sho ws only one COM por t setting being changed. Y ou ma y hav e 4 COM por ts (or 1, 2 por ts depending on the model), you will need to set it 4 times f or , once for each COM por t.
13 Specications Specification NETRS2321POE LAN Connector RJ45 Speed 10/100Mbps RS-232 Number of P orts 1 x RS-232 Signals TXD , RXD , RTS, CTS , DTR, DSR, DCD , GND Connector DB9 Male (RS-232) Parity None, Odd, Ev en Data Bits 6, 7, 8 Stop Bits 1, 2 Speed 300 to 115.
14 Specification NETRS2321POE En vironmental Operating T emperature 0 to 55C (32 to 131F) Storage T emperature -20 to 85C (-4 to 185F) Operating Humidity 5 to 95% RH.
15 T echnical Suppor t StarT ech.com’ s lifetime technical suppor t is an integral par t of our com- mit-ment to pro vide industr y-leading solutions. If you ever need help with your product, visit www .star tech.com/suppor t and access our com- prehensive selection of online tools , documentation, and downloads.
StarT ech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans man y channels, including gov ernment, education and industrial f acilities to name just a f ew .
デバイスStarTech.com NETRS23POEEUの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
StarTech.com NETRS23POEEUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStarTech.com NETRS23POEEUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。StarTech.com NETRS23POEEUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。StarTech.com NETRS23POEEUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
StarTech.com NETRS23POEEUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStarTech.com NETRS23POEEUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、StarTech.com NETRS23POEEUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStarTech.com NETRS23POEEUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
